Abstract:In order to avoid the artifacts which result because void swelling and precipitate stability are not accelerated to the same degree during radiation damage simulation experiments, a series of electron irradiation experiments were performed on commercial alloy specimens which were first irradiated in-reactor. This procedure is intended to establish a microstructure typical of in-reactor behavior which is then irradiated at accelerated rates in order to provide prediction of behavior to high fluence in-reactor on a reduced time scale.Neutron-irradiated specimens of fully-aged and solution treated Nimonic ∗ PE16, 20% cold-worked AISI 310 stainless steel and aged A-286 were electron irradiated at 500–700°C in the HVEM to determine the effect of reactor-conditioning on the simulation of void swelling at high neutron fluences.For aged PE16 it was found that the swelling behavior under electron irradiation was unaffected by prior neutron irradiation. Specimens from four different reactor temperature/fluence conditions showed the same temperature-dependent swelling rates in the HVEM irradiations. The swelling behavior of aged PE16. A-286 and cold-worked 310 was also consistent with previous results on specimens which were not previously neutron irradiated. However, reactor conditioning did alter the swelling response of solution-treated PE16 under electron irradiation, and this effect is attributed to the irradiaton-enhanced precipitation of γ' which occurs in-reactor.It is concluded that void and dislocation substructures generated in-reactor exert only second order control over void swelling during electron irradiation. Reactor conditioning expriments can be better described as temperature change experiments, providing that the alloy in question remains stable during neutron irradiation.

Neural networks for prediction of swelling in austenitic steels irradiated by fast neutrons

Prediction of the Swelling Rate of Irradiated Type 316 Stainless Steels Via Machine Learning Methods

Machine Learning–Based Prediction of Irradiation-Induced Swelling from Synergistic Effects of Helium and Hydrogen

Model-based quantitative methods to predict irradiation-induced swelling in alloys

Machine Learning - Assisted Prediction of Yield Strength in Irradiated Type 316 Stainless Steels

Characterizing the flux effect on the irradiation embrittlement of reactor pressure vessel steels using machine learning

Effect of Neutron Irradiation on the Mechanical Properties, Swelling and Creep of Austenitic Stainless Steels

Materials Swelling Revealed Through Automated Semantic Segmentation of Cavities in Electron Microscopy Images

Swelling in previously neutron-irradiated commercial Fe-Cr-Ni based alloys under electron irradiation

Predictions and Uncertainty Estimates of Reactor Pressure Vessel Steel Embrittlement Using Machine Learning

Irradiated mechanical properties predicted by a machine learning method with the Fourier-transform-based feature extension

A physics‐informed neural network for creep life prediction of austenitic stainless steels in air and liquid sodium

A Model for Dose Dependence of the Void Swelling in Electron-Irradiated Alloys

Multiscale modelling in nuclear ferritic steels: From nano-sized defects to embrittlement

Prediction of True Stress at Hot Deformation of High Manganese Steel by Artificial Neural Network Modeling

Predicting High Temperature Flow Stress of Nickel Alloy A230 Based on an Artificial Neural Network

The Unified Model for Irradiation Embrittlement Prediction of Reactor Pressure Vessel

Predicting SCC Behavior of Austenitic Stainless Steels in High Temperature Water by Artificial Neural Network

Artificial neural network-based prediction model of residual stress and hardness of nickel-based alloys for UNSM parameters optimization

Finite element models for radiation effects in nuclear fusion applications