Abstract:The automobile industry relies primarily on spot welding operations, particularly resistance spot welding (RSW). The performance and durability of the resistance spot-welded joints are significantly impacted by the welding quality outputs, such as the shear force, nugget diameter, failure mode, and the hardness of the welded joints. In light of this, the present study sought to determine how the aforementioned welding quality outputs of 0.5 and 1 mm thick austenitic stainless steel AISI 304 were affected by RSW parameters, such as welding current, welding time, pressure, holding time, squeezing time, and pulse welding. In order to guarantee precise evaluation and experimental analysis, it is essential that they are supported by a numerical model using an intelligent model. The primary objective of this research is to develop and enhance an intelligent model employing artificial neural network (ANN) models. This model aims to provide deeper knowledge of how the RSW parameters affect the quality of optimum joint behavior. The proposed neural network (NN) models were executed using different ANN structures with various training and transfer functions based on the feedforward backpropagation approach to find the optimal model. The performance of the ANN models was evaluated in accordance with validation metrics, like the mean squared error (MSE) and correlation coefficient (R2). Assessing the experimental findings revealed the maximum shear force and nugget diameter emerged to be 8.6 kN and 5.4 mm for the case of 1-1 mm, 3.298 kN and 4.1 mm for the case of 0.5-0.5 mm, and 4.031 kN and 4.9 mm for the case of 0.5-1 mm. Based on the results of the Pareto charts generated by the Minitab program, the most important parameter for the 1-1 mm case was the welding current; for the 0.5-0.5 mm case, it was pulse welding; and for the 0.5-1 mm case, it was holding time. When looking at the hardness results, it is clear that the nugget zone is much higher than the heat-affected zone (HZ) and base metal (BM) in all three cases. The ANN models showed that the one-output shear force model gave the best prediction, relating to the highest R and the lowest MSE compared to the one-output nugget diameter model and two-output structure. However, the Levenberg-Marquardt backpropagation (Trainlm) training function with the log sigmoid transfer function recorded the best prediction results of both ANN structures.

Artificial neural network-based prediction model of residual stress and hardness of nickel-based alloys for UNSM parameters optimization

Prediction of residual stress distribution induced by ultrasonic nanocrystalline surface modification using machine learning

Fine-tuned artificial intelligence model using pigeon optimizer for prediction of residual stresses during turning of Inconel 718

Optimization of residual stresses generated by ultrasonic nanocrystalline surface modification through analytical modeling and data-driven prediction

Prediction about Residual Stress and Microhardness of Material Subjected to Multiple Overlap Laser Shock Processing Using Artificial Neural Network

Artificial Neural Network-based approach for prediction of nanomechanical properties of anodic coating on additively manufactured Al-10Si-Mg alloy

Integrated Computational Alloy Design of Nickel-Base Superalloys

Predicting High Temperature Flow Stress of Nickel Alloy A230 Based on an Artificial Neural Network

Bridging Precipitate Microstructure and Mechanical Hardness of Nickel-Based Superalloy Through Artificial Neural Network Model

An integration of RSM and ANN modelling approach for prediction of FSW joint properties in AA7178/AA5456 alloys

Response Surface Methodology and Artificial Neural Network-Based Models for Predicting Performance of Wire Electrical Discharge Machining of Inconel 718 Alloy

Hybrid ANN-physical Model for Predicting Residual Stress and Microhardness of Metallic Materials after Laser Shock Peening

Artificial Neural Networks and Experimental Analysis of the Resistance Spot Welding Parameters Effect on the Welded Joint Quality of AISI 304

Evolutionary Artificial Neural Network Approach for Predicting Properties of Cu-15ni-8sn-0.4si Alloy

Residual Stress Prediction of Micro-Milling Inconel 718 Thin-Walled Parts

An ANN Hardness Prediction Tool Based on a Finite Element Implementation of a Thermal–Metallurgical Model for Mild Steel Produced by WAAM

Artifical Neural Metwork Model for the Prediction of Mechanical Properties of Ti-10v-2fe-3al Titanium Alloy

Artificial neural network approach for mechanical properties prediction of as-cast A380 aluminum alloy

OPTIMIZATION OF THE PROCESS CONSTRAINTS IN SPARK EROSION MACHINING OF ALUMINIUM ALLOY AA 6061 HYBRID COMPOSITES USING ARTIFICIAL NEURAL NETWORK

Design of a nickel-base superalloy using a neural network