A Low-Cost Sensing Solution for SHM, Exploiting a Dedicated Approach for Signal Recognition

Bruno Andò,Danilo Greco,Giacomo Navarra,Francesco Lo Iacono

DOI: https://doi.org/10.3390/s24124023

IF: 3.9

2024-06-21

Sensors

Abstract:Health assessment and preventive maintenance of structures are mandatory to predict injuries and to schedule required interventions, especially in seismic areas. Structural health monitoring aims to provide a robust and effective approach to obtaining valuable information on structural conditions of buildings and civil infrastructures, in conjunction with methodologies for the identification and, sometimes, localization of potential risks. In this paper a low-cost solution for structural health monitoring is proposed, exploiting a customized embedded system for the acquisition and storing of measurement signals. Experimental surveys for the assessment of the sensing node have also been performed. The obtained results confirmed the expected performances, especially in terms of resolution in acceleration and tilt measurement, which are 0.55 mg and 0.020°, respectively. Moreover, we used a dedicated algorithm for the classification of recorded signals in the following three classes: noise floor (being mainly related to intrinsic noise of the sensing system), exogenous sources (not correlated to the dynamic behavior of the structure), and structural responses (the response of the structure to external stimuli, such as seismic events, artificially forced and/or environmental solicitations). The latter is of main interest for the investigation of structures' health, while other signals need to be recognized and filtered out. The algorithm, which has been tested against real data, demonstrates relevant features in performing the above-mentioned classification task.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation

What problem does this paper attempt to address?

The problem this paper attempts to address is the development of a low-cost Structural Health Monitoring (SHM) solution to assess the structural condition of buildings and infrastructure. Specifically, the paper proposes a custom embedded system for acquiring and storing measurement signals, and classifying the recorded signals using dedicated algorithms to distinguish between the following three types of signals:

1. **Noise Floor (NF)**: Mainly related to the inherent noise of the sensing system.
2. **Exogenous Sources (ES)**: External disturbances unrelated to the dynamic behavior of the structure.
3. **Structural Responses (SR)**: The structure's response to external stimuli (such as earthquakes, artificial forces, or environmental impacts).

Among these, structural response signals are the most important for investigating the structural health condition, while other signals need to be identified and filtered out. The paper experimentally verifies the effectiveness of the algorithm in the classification task.