Abstract:As the main seismic component of a bridge, seismic damage to the bridge pier has a greater effect on its subsequent service. In the offshore chloride environment, the issues (e.g., reinforcement bar corrosion and attenuation of concrete strength) of piers caused by chloride ion seriously curtail the normal service life and deteriorate the anti-seismic property of bridge structures. The engineered cementitious composite (ECC)-reinforced concrete (RC) composite pier with high strength reinforcement bars (HSRB) is expected to solve the above problems. This study aims to clarify the time-varying seismic vulnerability (SV) of the HSRBECC-RC composite pier during its full life cycle (FLC). Based on OpenSees, the refined finite element analysis models of RC pier, ECC-RC composite pier, and HSRBECC-RC composite pier have been established. Moreover, using the nonlinear time-path dynamic analysis method, the influence of chloride ion erosion on the time-dependent seismic vulnerability (SV) of these different piers in different service life and different peak ground acceleration (PGA) were analyzed from a dynamic point of view. The research shows that the exceeding probability (EP) of the same damage level increases with the enhancement of service time and PGA and with the increase of destruction, the exceeding probability (EP) of slight damage (DL-1), moderate damage (DL-2), serious damage (DL-3), and complete collapse (DL-4) decreases in turn; the corrosion degree of chloride ion to piers is small during the early service period, the time-varying vulnerability curve of the bridge piers is almost the same as that of a new bridge, and during later service, as the extent of chloride ion corrosion deepens, exceeding probability (EP) under severe damage (DL-3) and complete collapse (DL-4) is increased, and the seismic performance is significantly enhanced.

Study on the effect of mesh ratio to the potential distribution of RC cathodic protection using BEM

Influence of Reinforcement Mesh Configuration for Improvement of Concrete Durability

The effects of anode distance and corrosion activity on current distribution for ICCP systems

Computational Approach to the Current and Chloride Ions Distribution of Reinforced Concrete Cathodic Protection System

Effect of ICCP on Bond Performance and Piezoresistive Effect of Carbon Fiber Bundles in Cementitious Matrix

Experiment on repair effect of bidirectional electromigration rehabilitation on reinforced concrete：changing rule of protective layer strength

Control of Repair Effect and Hydrogen Embrittlement Risk by Parameters Optimization for BIEM

Effect of ICCP on Tensile Performance and Piezoresistive Effect of CFRCM Plates

Study on the Corroded Hollow Section RC Columns Strengthened by ICCP-SS System

Effect of ICCP on Tensile Performance of Carbon Fiber Bundles in Seawater Sea-sand Cementitious Matrix

Effects of Environmental Water-Level Changes and Bidirectional Electromigration Rehabilitation on Durability of Concrete

THE CORROSION MONITORING USING RESISTANCE-PROBE METHOD IN THE CEMENT MOTAR AND COMPARING WITH ELECTROCHEMISTRY-PROBE METHOD

Deterioration of Static Mechanical Properties of RC Beams Due to Bond Damage Induced by Electrochemical Rehabilitation

A comparative numerical evaluation of linear anode arrangements for enhancing above ground storage tank cathodic protection via mesh grid and concentric ring designs

Effect of Concrete Mixture Proportions on the Chloride Resistance

Effect of Chloride Removal and Corrosion Prevention for Cracked Concrete Based on Bi-Directional Electro-Migration Rehabilitation

Effect of Imidazoline Inhibitor on the Rehabilitation of Reinforced Concrete with Electromigration Method

Effect of pitting corrosion on flexural performance of RC beams

Numerical Modeling Of The Effect Of Concrete Porosity Evolution On Electrochemical Chloride Removal From Concrete Structures

Repair Effect of Bidirectional Electromigration Rehabilitation on Concrete Structures at Different Durability Deterioration Stages

Study on time-varying seismic vulnerability and analysis of ECC-RC composite piers using high strength reinforcement bars in offshore environment