Abstract:The interactions among thermal history, plastic deformation and residual stresses in the friction stir welding (FSW) process under different welding parameters have been widely considered a crucial issue and still not fully understood. In the present study, a novel three-dimensional fully coupled thermo-mechanical finite element (FE) model based on coupled Eulerian-Lagrangian approach (CEL) has been developed to simulate the FSW process of aluminium alloy AA 6082-T6 and to analyse the thermo-mechanical interaction mechanisms under different welding conditions. The numerical model successfully simulates the plunge, dwell, and welding steps in FSW and captures the evolution of temperature, plastic deformation, and residual stresses in the welded joint. The obtained results were validated by experimental testing with observed cross-weld thermal history, optical macrography and residual stress measurement using the neutron diffraction technique. The results reveal that the tool rotation speed governs the temperature evolution; the peak temperature increased from 740 to 850 °K when the tool rotation speed rose from 800 to 1100 rpm. The rotational speed also affected the plastic deformation, material flow, and the volume of material being stirred during the welding process. Higher plastic deformation is formed in the stirring zone by increasing the tool angular velocity. This behaviour led to an increase in the stirring effect of the welding tool, reduction of the tunnel defect size and enhancing the quality of weldments. The distribution of residual stresses in different zones of the FSW joints has been found to have an M-shaped profile. A significant tensile residual stress is characterised in the edge of the nugget zone in both longitudinal and transverse directions, balanced by compressive stresses in the thermo-mechanically affected zone, heat-affected zone and base metal. The presented FE modelling provides a reliable insight into the effects of the welding parameters on the weld quality of FSW joints and process optimisation with minimised experimental trials.

A Physics-Informed Machine Learning Model of Dissimilar Friction Stir Welding to Tailor Residual Stress Using Coupled Eulerian and Lagrangian Approach

Machine learning-based characterization of friction stir welding in aluminum alloys

A Survey of Machine Learning in Friction Stir Welding, including Unresolved Issues and Future Research Directions

Enhancing Predictive Capabilities: Machine Learning Approaches for Predicting Mechanical Behavior in Friction Stir Welded Aluminum Alloys

Force data-driven machine learning for defects in friction stir welding

Applications of machine learning in friction stir welding: Prediction of joint properties, real-time control and tool failure diagnosis

Applications of Machine Learning to Friction Stir Welding Process Optimization

Heat generation, plastic deformation and residual stresses in friction stir welding of aluminium alloy

Subregion Based Prediction of Residual States in Friction Stir Welding of Dissimilar Metals

Residual Stresses Simulation for Friction Stir Welded Joint

Prediction of residual stress in electron beam welding of stainless steel from process parameters and natural frequency of vibrations using machine-learning algorithms

A Multiple Response Prediction Model for Dissimilar AA-5083 and AA-6061 Friction Stir Welding Using a Combination of AMIS and Machine Learning

Process parameter optimization of Friction Stir Welding on 6061AA using Supervised Machine Learning Regression-based Algorithms

Machine learning tools for flow-related defects detection in friction stir welding

Performance evaluation of friction stir welding using machine learning approaches

Comparative Analysis of Predictive Modeling Techniques for Mechanical Properties in Dissimilar Friction Stir Welding of AA6061 and AZ31B

Supervised Machine Learning and Physics based Machine Learning approach for prediction of peak temperature distribution in Additive Friction Stir Deposition of Aluminium Alloy

Finite element method-enabled machine learning for analysing residual stress and plastic deformation in surface mechanical attrition-treated alloys

Prediction of residual stress distribution induced by ultrasonic nanocrystalline surface modification using machine learning

Prediction of properties of friction stir spot welded joints of AA7075-T651/Ti-6Al-4V alloy using machine learning algorithms