Abstract:In this study, successful joints were fabricated on 4-mm-thick aluminum alloy 5052 sheets by using friction stir spot welding (FSSW) method. This research thoroughly investigated the impacts of welding parameters, specifically dwell time (DT) and rotational speed (RS), on the microstructure, and joint efficiency mechanical characteristics of the joints. The finding of this study highlighted the importance of optimization of process parameters to achieve superior weld joints. The most noteworthy achievement of this study was the attainment of maximum tensile shear load TSL of 2439 N with 19.4% joint efficiency at DT of 2 s and RS of 1300 rpm. A remarkable 48% improvement was observed in the obtained results at lower RS of 850 rpm and longer DT of 5 s. Simultaneously, maximum microhardness was 37.2 HV which was attained in thermal–mechanical affected zone at DT of 2 s and RS of 850 rpm, which was about 51% higher than the condition involving lower RS. Microstructure examination unveiled the significant influences of process parameters on hook deformation and penetration around the pin area. Additionally, in this study, a novel prediction model was introduced to estimate the temperature evaluation and tensile shear load of the samples. The model was constructed employing various machine learning techniques, multi-linear regression (MLR), support vector machine (SVM), adoptive neuro-fuzzy inference system (ANFIS) and including artificial neural network (ANN). The results obtained using this model served as a pioneering approach to predict the tensile shear load and temperature evaluation of welded samples. Remarkably, ANFIS model surpassed the other models due to its accuracy in perdition. The average error of this model for tensile shear load was only 4.3%, and for temperature evaluation, it was only 0.803%. The outcome of this study revealed that this predictive model could be a milestone in this field, enabling more precise and reliable prediction of key welding process parameters which significantly enhanced the efficiency and quality of welding processes.

Applications of machine learning in friction stir welding: Prediction of joint properties, real-time control and tool failure diagnosis

Applications of Machine Learning to Friction Stir Welding Process Optimization

A Survey of Machine Learning in Friction Stir Welding, including Unresolved Issues and Future Research Directions

Machine learning-based characterization of friction stir welding in aluminum alloys

Enhancing Predictive Capabilities: Machine Learning Approaches for Predicting Mechanical Behavior in Friction Stir Welded Aluminum Alloys

Machine learning algorithms for prediction of penetration depth and geometrical analysis of weld in friction stir spot welding process

A Physics-Informed Machine Learning Model of Dissimilar Friction Stir Welding to Tailor Residual Stress Using Coupled Eulerian and Lagrangian Approach

Prediction of properties of friction stir spot welded joints of AA7075-T651/Ti-6Al-4V alloy using machine learning algorithms

Performance evaluation of friction stir welding using machine learning approaches

Machine learning tools for flow-related defects detection in friction stir welding

Assessment of friction stir spot welding of AA5052 joints via machine learning

A technical perspective on integrating artificial intelligence to solid-state welding

Thermal Field Prediction for Welding Paths in Multi-Layer Gas Metal Arc Welding-Based Additive Manufacturing: A Machine Learning Approach

Machine Learning for Parametrical Analysis of Friction Stir Welded Aluminum Metal Matrix Composites

Role of expert systems to optimize the friction stir welding process parameters using numerical modelling: a review

Process parameter optimization of Friction Stir Welding on 6061AA using Supervised Machine Learning Regression-based Algorithms

Machine learning for advancing laser powder bed fusion of stainless steel

Application of machine learning approaches to predict joint strength of friction stir welded aluminium alloy 7475 and PPS polymer hybrid joint

FEM-Driven machine learning approach for characterizing stress magnitude, peak temperature and weld zone deformation in ultrasonic welding of metallic multilayers: application to battery cells

A Multiple Response Prediction Model for Dissimilar AA-5083 and AA-6061 Friction Stir Welding Using a Combination of AMIS and Machine Learning