Abstract:Numerical simulation is essential for the prediction and evaluation of hydrocarbon reservoir performance. Numerical simulators developed for the description of the behavior of hydrates under production and the corresponding flow of fluids and heat accounting for all known processes are powerful, but they need validation through comparison to field or experimental data in order to instill confidence in their predictions. In this study, we analyze by means of numerical simulation the results of an experiment of methane hydrate dissociation by thermal stimulation in unconsolidated porous media heated through the vessel walls. The physics captured by the model include multicomponent heat and mass transfer, multiphase flow through porous media, and the phase behavior of the CH4 + H2O system involved in methane hydrate formation and dissociation. The set of governing equations consists of the mass and energy conservation equations coupled with constitutive relationships, i.e., the dissolution of gas in H2O, relative permeability and capillary pressure models, composite thermal conductivity models, and methane hydrate phase equilibria. The model geometry describes accurately the hydrate reactor used in a recent experimental study investigating methane hydrate dissociation behavior [Chong et. al. Appl. Energy 2016, 177, 409–421]. The cumulative gas production is estimated and validated against three tests of experimental data involving different boundary temperatures, showing a good agreement between observations and numerical predictions. The predicted evolution of the spatial distributions of different phases over time shows that hydrate dissociation progresses inward from the reactor boundary to the center, methane gas accumulates to the top of the reactor because of buoyancy, and water migrates down to the bottom of the reactor because of gravity. A sharp hydrate dissociation front is predicted, and the estimated location of hydrate dissociation front suggests a linear relationship with the square root of time. A sensitivity analysis on the thermal conductivity of sand under fully saturated conditions is conducted to elucidate its effect on the gas production behavior. In addition, the energy efficiency ratio computed from the simulation of this boundary-wall heating technique varies from 14.0 to 16.2. Deviations between observations and predictions of the evolution of the temperature profile are attributed to initial heterogeneous distribution of the hydrate phase in the hydrate reactor.

Simulation of the Thermal Decomposition of Methane at Constant Volume and Temperature Using Methods of Molecular Dynamics and Thermodynamics

Molecular Dynamics Simulation of Liquid Methanol

Molecular dynamics simulations to evaluate the decomposition properties of methane hydrate under different thermodynamic conditions

Publisher’s Note: Thermal Decomposition of the Solid Phase of Nitromethane:Ab InitioMolecular Dynamics Simulations [phys. Rev. Lett.105, 188302 (2010)]

Literature Review on Thermodynamic and Kinetic Limitations of Thermal Decomposition of Methane

Unexpected Mechanistic Variants in the Thermal Gas-Phase Activation of Methane

Simulation of the Combustion Process of Methane Hydrate Taking into Account Incomplete Evaporation of Released Water during Its Dissociation

Molecular dynamics simulation of the low-temperature partial oxidation of CH4

Numerical Analysis of Experiments on Thermally Induced Dissociation of Methane Hydrates in Porous Media

Analysis of Influencing Factors and Kinetic Characteristics of Spherical Methane Hydrate Decomposition

Molecular-dynamics simulations of methane hydrate dissociation

Modeling of the combustion process of methane hydrate taking into account the kinetics of the decomposition process

Experimental Study of the Process of Dissociation of Methane Hydrate Accompanied by Its Combustion

Combustion Driven by Fragment-based Ab Initio Molecular Dynamics Simulation

Role of Mechanical Deformation in the Thermal Transport of Si-Type Methane Hydrate.

Fragment-Based Ab Initio Molecular Dynamics Simulation for Combustion

Quantifying reaction rates in methane oxidation: atomistic simulations at high temperature

Vapor–Liquid Equilibrium for the Mixture Nitrogen (N2) + Methane (CH4) in the Temperature Range of (110 to 125) K

Thermodynamic Properties of Supercritical Mixtures of Carbon Dioxide and Methane: A Molecular Simulation Study

Molecular Dynamics Simulation and a Cubic Equation of State of Supercritical Methane Up to 3000 K and 3000 MPa

Non-equilibrium decomposition dynamics and fluctuation-dissipation analysis of structure I methane hydrate in confined space