Abstract:The effect of silicon on diffusion behavior of the carbide forming elements in Ni-Mo-Cr-Fe based corrosion-resistant alloy is studied by diffusion couple experiment. One group of diffusion couples are made of the alloy with a different silicon content, another group of diffusion couples are made of pure nickel and the alloy with different silicon content (0Si, 2Si). Two groups of alloys with same silicon content and different carbon content are also prepared, the microstructure of solution and aging state of these two groups alloys are analyzed, and their stress rupture properties are tested. The effect of silicon on the diffusion of alloy elements and the interaction effect of carbon and silicon on the microstructure and stress rupture properties of the alloy are analyzed. The mechanism of Si on the precipitation behavior of carbide phase in Ni-Mo-Cr-Fe corrosion resistant alloy is discussed. The results show that silicon can promote the diffusion of carbide forming elements and the formation of carbide. The precipitation behavior of the secondary phase is the result of the interaction effect of silicon and carbon, and is related to the thermal history of the alloy. Combined with the characteristic of primary carbides, it is confirmed that the precipitation of M12C type secondary carbide is caused by the relative lack of carbon element and the relative enrichment of carbide forming elements such as molybdenum. The stress rupture properties of two silicon-containing alloys with different carbon contents in solution and aging state are tested. The stress rupture life of low carbon alloy is lower compared with high carbon alloy at solution state, but after aging treatment, the stress rupture life of low carbon alloy is significantly improved, and higher than that of high carbon alloy. The main aim of this research is to reveal the influence mechanism of silicon on carbide phase precipitation of a Ni-Mo-Cr-Fe based corrosion-resistant superalloy, which provides theoretical basis and reference for later alloy design and engineering application.

Some new observations on interface reaction between nickel-based single crystal superalloy CMSX-4 and silicon oxide ceramic core

Wetting and Interfacial Phenomena Between a Ni-based Superalloy and Silica-Based Ceramic Cores with ZrSiO4 Additions

Observation on the Interface of Α-Al2o3/cr2o3: Prepared by Oxidation of Al45Cr7

Effect of Α-Al2o3 Coatings on the Interface of Ni/SiC Composites Prepared by Electrodeposition

Reinforcing Al matrix composites by novel intermetallic/SiC interface and transition structure

Understanding the Metal-Mold interfacial reactions during directional solidification of superalloys using Al 2 O 3 -rich ceramic mold

Interfacial reaction between the oxidized SiC particles and Al-Mg alloys

Effect of Carbides on Interfacial Reactions Between Superalloy DZ40M and Ceramic Mold in Directional Solidification

Investigations on Interface Reactions and Wettability Between Melt Superalloys and Ceramic Materials

Study on Interfacial Reaction of Ti/AlN by SIMS, RBS and XRD

Interaction of Si3N4 Ceramics and Liquid Aluminum at Interface without Oxidation

Influence Mechanism of Silicon on Carbide Phase Precipitation of a Corrosion Resistance Nickel Based Superalloy

Wetting and Interfacial Behavior of Molten Al on Mo-Ni(Co)-Si Coated SiC Ceramic

Preparation of Al2O3/SiC/Ni/Al-Si ceramic matrix composites with multi-phase vague interface by oxidation of molten aluminum alloys

An in-situ formed ceramic/alloy/ceramic sandwich barrier to resist elements interdiffusion between NiCrAlY coating and a Ni-based superalloy

Multiphase-field and experimental study of solidification behavior in a nickel-based single crystal superalloy

High-temperature wetting behavior of molten Ni-based superalloy on Y2O3 ceramics with different surface microstructures

Evolution and Formation Mechanism of the Interfacial Microstructure on Diffusion Bonded Joints of Single Crystal Ni-based Superalloys to Ti3AlC2 Ceramic with Ni Interlayer

Interface properties of Ti3SiC2/Al2O3 ceramics: Combined experiments and first-principles calculations

Investigation of interfacial reaction mechanism between SiC and Inconel 625 superalloy using thermodynamic calculation

Understanding the Interfacial Properties in BN-SiO2 Diphase Ceramic/tininb Filler Alloy Systems: First-principles and Mechanical Studies