Abstract:Nonuniform temperature fields in steam cracking furnaces caused by geometry factors such as burner positions, shadow effects, and asymmetry of the reactor coil layout are detrimental for product yields and run lengths. The techniques of adjusting burner firing (zone firing) and feedstock mass flow rate (pass balancing) have been practiced industrially to mitigate these effects but could only reduce the nonuniformities between the so‐called modules (a group of many coils). An extension of the pass balancing methodology is presented to further minimize the intra‐module nonuniformities, that is, variation between the coils within a module, in floor fired furnaces. Coupled furnace‐reactor computational fluid dynamics‐based simulations of an industrial ultraselective conversion (USC) furnace were performed to evaluate four different feedstock flow distribution schemes, realizing equal values for coil outlet temperature, propene/ethene mass ratio, maximum coking rate and maximum tube metal temperature (TMT), respectively, over all the reactor coils. It is shown that feedstock flow distribution creates a larger operating window and extends the run length. Out of the four cases, the coking rate as criterion leads to the highest yearly production capacity for ethene and propene. Uniform maximum coking rates boost the annual production capacity of the USC furnace with a nameplate ethene capacity of 130 103 metric tons per year with 1000 metric tons for ethene and 730 metric tons for propene. For industrial application, achieving uniform maximum TMT is more practical due to its measurability by advanced laser‐based techniques. Most steam cracking furnaces can be retrofitted by optimizing the dimensions of venturi nozzles that regulate the feedstock flow to the coils. © 2017 American Institute of Chemical Engineers AIChE J, 63: 3199–3213, 2017

Technical Progress in Ethylene Cracking Furnace Burners

Numerical simulation on flow, combustion and heat transfer of ethylene cracking furnaces

Low NOx burner technology for ethylene cracking furnaces

Optimization of Cracking Furnace Outlet Temperature Control Technique for Cracking Furnace

Analyzing Burner Performance and Combustion Phenomenon in an Olefin Plant's Industrial Furnace: A CFD Study

Impact of Flue Gas Radiative Properties and Burner Geometry in Furnace Simulations

Steam Cracking and EDC Furnace Simulation

Progress in thermal plasma reactor used for coal pyrolysis to acetylene

MULTIENRICHMENT LOW Nox BURNER AND ITS APPLICATION PRACTICE IN A 65t/h BOILER

CFD simulation of combustion and heat transfer in ethylene cracking furnace

Numerical simulation of combustion distribution in a gas burner

Experimental Study And Numerical Simulation On A Novel Structure Of Dual Register Whirl Burner

Improving mixing and gasification characteristics in an industrial-scale entrained flow gasifier with a novel burner

Experiment and numerical study on combustion characteristics of low-nitrogen burners

Combustion Technologies of Down-fired Boilers with High Efficiency and Low-NO_x Emissions

Comprehensive Cfd Simulation of Product Yields and Coking Rates for A Floor- and Wall-Fired Naphtha Cracking Furnace

Computational Fluid Dynamics‐based Steam Cracking Furnace Optimization Using Feedstock Flow Distribution

Optimization of the Ethane Thermal Cracking Furnace Based on the Integration of Reaction Network

Technology for Optimizing Flue Gas Pollutant Emission Reduction in Oil Field Heating Furnace Combustion

Coupled Simulation of Combustion with Heat Transfer and Cracking Reaction in SL-Ⅱ Industrial Ethylene Pyrolyzer

Recent Progress in Research on Efficient Low Polluting Combustion and Gasification Technology