Abstract:Solidified natural gas storage (SNG) using hydrate can provide environmentally friendly, highly compact and non explosive mode of NG storage at mild storage conditions. The efficient and rapid formation of natural gas hydrate is of great significance to the industrial application of SNG. In this work, in order to improve the gas storage capacity and absorption rate of CH4 hydrate, experiments were carried by adding expanded graphite (EG) with sodium dodecyl sulfate (SDS) with a pressure range of 5.0–8.0 MPa and a temperature of 273.2 K. The results indicate that EG can not only promote the formation of hydrate by promoting the nucleation of hydrate, but also accelerated the growth of hydrate by enhancing hydration heat transfer. EG system (0.05 wt%, 0.08 wt%, and 0.10 wt%) enabled faster hydrate formation than a liquid water system, with a content of 0.08 wt% optimal for the enhancement of hydrate formation. In the combination of EG (0.08 wt%) and SDS solution, EG + 0.03 wt% SDS system can improve the kinetics of hydrate formation to the greatest extent; the maximum gas storage capacity reached 190.4 STP/g H2O, and the maximum gas storage speed reached 20.84 cm3·g−1·min−1 at 273.2 K and 6 MPa. Compared with the SDS system, the maximum methane uptake and rates of EG + 0.03 wt% SDS system increased by 11.90% ~ 26.18% and 15.09% ~ 51.67% under different pressures respectively. At relatively low pressure, the hydrate can achieve a saturation of ~90% in EG + 0.03 wt% SDS system. On the other hand, compared with other carbon materials such as graphite and carbon nanotubes, the gas storage capacity and average gas storage rate of EG system were 1.12–1.37 times and 1.67–30.17 times higher, respectively, under similar temperature and pressure conditions. Therefore, a collaborative mode of enhancing gas concentration, nucleation site and heat transfer efficiency at the gas–liquid interface of hydrate reaction with only one material (EG) was proposed to promote the formation of hydrate. Further study on the promotion mechanism of EG and amplification experiments are expected to provide an effective way for the commercial application of SNG process in future work.

Hydrate Formation Loaded by an Activated Carbon Bed in 3D-Printed Containers

Carbon nanotubes-based porous media constructed via 3D printing for methane hydrate formation

Kinetics of Methane Hydrate Formation in a 1200 Ml Unstirred Reactor for Natural Gas Storage

Promotion of Activated Carbon on the Nucleation and Growth Kinetics of Methane Hydrates

Experimental study on synergistic promotion of reciprocating impact and porous materials on methane capture based on hydrate method

Quantitative Analysis of Methane Hydrate Formation in Size-Varied Porous Media for Gas Storage and Transportation Application

Study on improving gas storage capacity of fixed bed filled with wet activated carbon

Hydrate-based adsorption-hydration hybrid approach enhances methane storage in wet MIL-101(Cr)@AC under mild condition

Study on formation of methane hydrate in rotating packed bed

Adsorption-Hydration Sequence Method for Methane Storage in Porous Material Slurry

Promoting methane hydrate formation with expanded graphite additives: Application to solidified natural gas storage

Fast formation kinetics of methane hydrate promoted by fluorinated graphite

Hydrate-based adsorption-hydration hybrid approach enhances methane storage density in ZIF-8@AC

The Promoting Effect and Mechanisms of Oxygen-Containing Groups on the Enhanced Formation of Methane Hydrate for Gas Storage

Methane hydrate efficient formation in a 3D-rGO/SDBS composite

Eco-friendly hydrogels serving as water carriers for improving methane hydrate formation and dissociation processes

How porous surfaces influence the nucleation and growth of methane hydrates

Promoted methane hydrate formation in -SO3--rich hydrogel clathrate

MXene (ti3c2tx) As a Promising Substrate for Methane Storage Via Enhanced Gas Hydrate Formation.

Methane Hydrate Formation Promoted by g-C 3 N 4 Nanoparticle-Doped SDS

Magnetically Recyclable -So3--coated Nanoparticles Promote Gas Storage Via Forming Hydrates.