Abstract:This paper investigated the oxidation of recalcitrant micropollutants [i.e., atenolol (ATL), flumequine, aspartame, and diatrizoic acid] by combining ferrate(VI) (FeVIO42–, FeVI) with a series of metal ions [i.e., Fe(III), Ca(II), Al(III), Sc(III), Co(II), and Ni(II)]. An addition of Fe(III) to FeVI enhanced the oxidation of micropollutants compared solely to FeVI. The enhanced oxidation of studied micropollutants increased with increasing [Fe(III)]/[FeVI] to 2.0. The complete conversion of phenyl methyl sulfoxide (PMSO), as a probe agent, to phenyl methyl sulfone (PMSO2) by the FeVI–Fe(III) system suggested that the highly reactive intermediate FeIV/FeV species causes the increased oxidation of all four micropollutants. A kinetic modeling of the oxidation of ATL demonstrated that the major species causing the increase in ATL removal was FeIV, which had an estimated rate constant as (6.3 ± 0.2) × 104 M–1 s–1, much higher than that of FeVI [(5.0 ± 0.4) × 10–1 M–1 s–1]. Mechanisms of the formed oxidation products of ATL by FeIV, which included aromatic and/or benzylic oxidation, are delineated. The presence of natural organic matter significantly inhibited the removal of four pollutants by the FeVI–Fe(III) system. The enhanced effect of the FeVI–Fe(III) system was also seen in the oxidation of the micropollutants in river water and lake water.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.est.0c04674?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.est.0c04674</a>.Information on the chemicals used and stopped-flow measurements; structures and HPLC conditions of four pollutants and the MS/MS data of ATL and its OPs; pH change by adding Fe(III) without buffering and the PMSO removal by the FeVI–Fe(III) system, respectively; kinetic modeling results; mass spectra of ATL and its OPs, and removal of pollutants under different conditions (<a class="ext-link" href="/doi/suppl/10.1021/acs.est.0c04674/suppl_file/es0c04674_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

What problem does this paper attempt to address?

The paper aims to address the following issues: 1. **Investigating the impact of metal ions on the oxidation of recalcitrant micropollutants by ferrate(VI)**: The study examines the effects of different metal ions (such as Fe(III), Ca(II), Al(III), Sc(III), Co(II), and Ni(II)) when combined with ferrate(VI) (FeVI) on the oxidation of several recalcitrant micropollutants (such as atenolol, fluoroquinolones, sweeteners, and iopromide). 2. **Improving oxidation efficiency**: It was found that the addition of Fe(III) can significantly enhance the oxidation effect of FeVI on micropollutants, and this enhancement effect reaches its maximum when the [Fe(III)]/[FeVI] ratio increases to 2.0. 3. **Role of highly reactive intermediates**: The study discovered that FeIV/FeV species are the main reason for the increased oxidation efficiency of micropollutants. Kinetic modeling confirmed that the reaction rate constant of FeIV is much higher than that of FeVI. 4. **Mechanism exploration**: The specific mechanisms of FeIV species in the oxidation process of micropollutants were discussed in detail, including the oxidation of aromatic and/or benzylic sites. In summary, this study aims to enhance the oxidation capacity of FeVI on recalcitrant micropollutants by combining different metal ions and to reveal the underlying chemical mechanisms.

Effect of Metal Ions on Oxidation of Micropollutants by Ferrate(VI): Enhancing Role of Fe IV Species

Synergistic effect in enhancing treatment of micro-pollutants by ferrate and carbon materials: A review

Enhanced ferrate(VI) oxidation of organic pollutants through direct electron transfer

Enhanced oxidation of micropollutants by ozone/ferrate(VI) process: Performance, mechanism, and toxicity assessment

Iodate(V) activated ferrate(VI) for enhanced oxidation of micropollutants from water and sediment media

Novel activated system of ferrate oxidation on organic substances degradation: Fe(VI) regeneration or Fe(VI) reduction

Improvement of Fe(VI) oxidation by NaClO on degrading phenolic substances and reducing DBPs formation potential

Fe(IV)/Fe(V)-mediated polyferric sulfate/periodate system: A novel coagulant/oxidant strategy in promoting micropollutant abatement

Enhanced diclofenac abatement by ferrate in the presence of montmorillonite: Trapping in-situ formed Fe(III)

Oxidation of Emerging Contaminants by S(IV) Activated Ferrate: Identification of Reactive Species and Mechanisms

Metal ion-induced enhanced oxidation of organic contaminants by ferrate: a review

Simultaneous Oxidation of Trace Organics and Sorption of Trace Metals by Ferrate (Fe(VI))-Coated Sand in Synthetic Wastewater Effluent

Mixed Oxidation of Chlorophene and 4-Tert-butylphenol by Ferrate(vi): Reaction Kinetics, Cross-Coupling Products and Improved Utilization Efficiency of Ferrate(vi)

Fenton-Enhanced zero-valent iron powder oxidation: Investigating transformation products of antimicrobials and its removal

Ferrate(VI)/Periodate System: Synergistic and Rapid Oxidation of Micropollutants via Periodate/Iodate-Modulated Fe(IV)/Fe(V) Intermediates

Ferrate(VI)/percarbonate for the oxidation of micropollutants: Interactive activation and release of low-concentration hydrogen peroxide for efficient electron utilization

Synergistic oxidative removal of sulfamethoxazole using Ferrate(VI) and peroxymonosulfate

Peroxysulfur species-mediated enhanced oxidation of micropollutants by ferrate(VI): Peroxymonosulfate versus peroxydisulfate

Removal of micro organic pollutants in high salinity wastewater by comproportionation system of Fe(VI)/Fe(III): Enhancement of chloride and bicarbonate

Removal of neonicotinoids present in secondary effluents by ferrate(VI)-based oxidation processes

Reduction of Cytotoxicity and DNA Double-Strand Break Effects of Wastewater by Ferrate(vi): Roles of Oxidation and Coagulation