Abstract:Background: Chlorophenols (CPs) constitute a group of organic pollutants that are introduced into the environment as a result of several man-made activities, such as uncontrolled use of pesticides and herbicides, and as byproducts in the paper pulp bleaching. Promising removal technologies of chlorinated aromatics consist in the application of advanced oxidation processes (AOPs) that can provide an almost total degradation of a variety of contaminants. Among these, wide application find Fenton systems based on generation of reactive species having a high oxidizing power, such as hydroxyl radical HO*. Our objective was that of determining the overall degradation efficiency of the model compound 2,4-dichlorophenol (DCP) by thermal Fenton-type oxidation systems with a view toward defining in more details relevant process parameters, the effect of reaction temperature and of co-catalyst Cu2+. Methods: Reaction conditions were similar to those generally adopted as optimal in many practical applications, i.e. pollutant/Fe2+ (as FeSO4) ratio ca. 20, Fe2+/Cu2+ (co-catalyst) 2:1, pH adjusted and controlled at pH 3, and H2O2 in excess (up to four-fold over the stoichiometric amount required for complete mineralization). Results and discussion: The results demonstrate that it is advantageous to carry out the reaction at a temperature markedly higher (70 degrees C) than ambient. The stepwise addition of H2O2 in aliquots yields an efficient transformation, while allowing a convenient control of the reaction exothermicity. Under these conditions, the essentially complete removal of the initial DCP is accomplished using just one equiv of H2O2 during 15 min; excess H2O2 (5 equivalents) yields extensive substrate mineralization. Also relevant, at 70 degrees C dechlorination of the initial DCP (and of derived reaction intermediates) is remarkably extensive (3-5% residual TOX), already with the addition of 1 equiv of H2O2. At the end of the reaction, IC and IC-MS analyses of the solution reveal that only low-molecular weight carboxylic acid (acetic, formic, oxalic, malonic, tartaric, etc.) contribute to the residual TOC. Conclusions: The whole of the results herein point to the advantage of performing the process at temperatures substantially higher than ambient (70 degrees C). Under the conditions adopted, almost complete degradation of the initial toxic compound can be achieved using hydrogen peroxide in fair excess (e.g., 3.5 equiv H2O2). Recommendations and outlook: In applying practical Fenton-type degradation systems to heavily polluted wastes, either for the pre-treatment of waters with a high COD value prior to biodegradation or for complete mineralization of pollutants, the set up of appropriate reaction conditions appears to be a key factor. Also, it is desirable to keep the concentration of iron salts within the lower limits in order to minimize the production and disposal of iron oxide sludges.

Mixed Oxidation of Chlorophene and 4-Tert-butylphenol by Ferrate(vi): Reaction Kinetics, Cross-Coupling Products and Improved Utilization Efficiency of Ferrate(vi)

Mechanistic Insights into the Reactivity of Ferrate(VI) with Phenolic Compounds and the Formation of Coupling Products.

Kinetics and mechanisms of phenolic compounds by Ferrate(VI) assisted with density functional theory

Fe(VI)-Mediated Single-Electron Coupling Processes for the Removal of Chlorophene: A Combined Experimental and Computational Study

Enhanced ferrate(VI) oxidation of organic pollutants through direct electron transfer

Overlooked Self-Catalytic Mechanism in Phenolic Moiety-Mediated Fenton-Like System: Formation of Fe(Iii) Hydroperoxide Complex and Co-Treatment of Refractory Pollutants

A Combined Experimental and Computational Study on the Oxidative Degradation of Bromophenols by Fe(VI) and the Formation of Self-Coupling Products

Experimental and theoretical study on Fe(VI) oxidative degradation of dichlorophen in water: Kinetics and reaction mechanisms.

Insights into mechanisms of UV/ferrate oxidation for degradation of phenolic pollutants: Role of superoxide radicals

Practical applications of the Fenton reaction to the removal of chlorinated aromatic pollutants. Oxidative degradation of 2,4-dichlorophenol

Removal of Personal Care Products Through Ferrate(VI) Oxidation Treatment

Overlooked Role of Fe(IV) and Fe(V) in Organic Contaminant Oxidation by Fe(VI)

Reinvestigation of the Oxidation of Organic Contaminants by Fe(VI): Kinetics and Effects of Water Matrix Constituents.

Insight into the Ferrate(vi)/ozone Process: Multiple Oxidation Systems Promote the Elimination of Electron-Deficient Pollutants

Ferrate(VI) Oxidation of Bisphenol E-Kinetics, Removal Performance, and Dihydroxylation Mechanism.

Insights into Oxidation of Pentachlorophenol (PCP) by Low-Dose Ferrate(vi) Catalyzed with Α-Fe2o3 Nanoparticles

Kinetics and reaction pathways for the transformation of 4-<i>tert</i>-butylphenol by ferrate(VI)

CHELATED Fe(II) ACTIVATED PERSULFATE OXIDATION OF PHENOL: EXPERIMENTAL OPTIMIZATION, REACTION KINETICS AND MECHANISM

Enhanced ferrate oxidation of organic pollutants in the presence of Cu (II) Ion

Coupling-promoted Oxidative Degradation of Organic Micropollutants by Iron Oxychloride (feocl) with Dual Active Sites

Experimental and Theoretical Study on the Degradation of Benzophenone-1 by Ferrate(VI): New Insights into the Oxidation Mechanism