Abstract:Abstract The development of highly efficient electrocatalysts for direct seawater splitting with bifunctionality for inhibiting anodic oxidation reconstruction and selective oxygen evolution reactions is a major challenge. Herein, we report a direct seawater oxidation electrocatalyst that achieves long-term stability for more than 1000 h at 600 mA/cm 2 @η 600 and high selectivity (Faraday efficiency of 100%). This catalyst revolves an amorphous molybdenum oxide layer constructed on the beaded-like cobalt oxide interface by atomic layer deposition technology. As demonstrated, a new restricted dynamic surface self-reconstruction mechanism is induced by the formation a stable reconstructed Co-Mo double hydroxide phase interface layer. The device assembled into a two-electrode flow cell for direct overall seawater electrolysis maintained at 1 A/cm 2 @1.93 V for 500 h with Faraday efficiency higher than 95%. Hydrogen generation rate reaches 419.4 mL/cm 2 /h, and the power consumption (4.62 KWh/m 3 H 2 ) is lower than that of pure water (5.0 KWh/m 3 H 2 ) at industrial current density.

What problem does this paper attempt to address?

The paper primarily aims to address two major challenges in direct seawater electrolysis: 1. **Development of Efficient Electrocatalysts**: In direct seawater electrolysis, finding a bifunctional electrocatalyst that can effectively inhibit anodic oxidation reconstruction and has selective oxygen evolution reaction (OER) characteristics is a significant challenge. Such catalysts need to be able to work stably for long periods under high current densities. 2. **Competition with Chlorine Evolution Reaction (CER)**: Due to the presence of chloride ions (Cl⁻) in seawater, there is competition between the chlorine evolution reaction and the oxygen evolution reaction, which affects the efficiency of hydrogen production from seawater electrolysis. The generation of chlorine gas not only consumes energy but also reacts with hydroxide ions (OH⁻) in the water to form hypochlorite, and may also form some insoluble precipitates like magnesium hydroxide. These factors increase the overpotential, reduce the efficiency of seawater electrolysis, and significantly deteriorate the structure and performance of the catalyst. To address the above issues, the research team developed a novel catalyst—molybdenum oxide (MoO₃) modified cobalt oxide (CoO) array (MoO₃@CoO/CC), which was prepared using Atomic Layer Deposition (ALD) technology. This catalyst can work stably for over 1000 hours at a high current density (600 mA/cm²) with nearly 100% Faradaic efficiency. Additionally, it can achieve efficient hydrogen production for 500 hours at 1.93 V with Faradaic efficiency maintained above 95%, demonstrating excellent application prospects. The key characteristics of this catalyst include: - **Limiting Dynamic Surface Self-Reconstruction Mechanism**: By forming a stable Co-Mo double-layer hydroxide interface layer, the directional reconstruction of the catalyst surface is achieved, thereby improving catalytic activity and stability. - **Chloride Ion Shielding Ability**: The MoO₃ layer can effectively prevent chloride ions from reaching the catalytic active interface, further enhancing the catalyst's selective seawater oxidation capability. In summary, this study proposes a new strategy for constructing directionally restricted reconstruction layers and selective catalytic layers, providing a new direction for the development of cost-effective and high-performance direct seawater electrolysis catalysts.

A restricted dynamic surface self-reconstruction toward high-performance of direct seawater oxidation

Efficient and Ultrastable Seawater Electrolysis at Industrial Current Density with Strong Metal‐Support Interaction and Dual Cl−‐Repelling Layers

Multiscale Engineering of Nonprecious Metal Electrocatalyst for Realizing Ultrastable Seawater Splitting in Weakly Alkaline Solution

Electrodeposition of NiFe-layered double hydroxide layer on sulfur-modified nickel molybdate nanorods for highly efficient seawater splitting

Surface Modified CoCrFeNiMo High Entropy Alloys for Oxygen Evolution Reaction in Alkaline Seawater

Stable seawater oxidation with a self-healing oxygen-evolving catalyst

Mild Construction of "Midas Touch" Metal-Organic Framework-Based Catalytic Electrodes for Highly Efficient Overall Seawater Splitting

Highly efficient and stable oxygen evolution from seawater enabled by a hierarchical NiMoSx microcolumn@NiFe-layered double hydroxide nanosheet array

Boosting Direct Seawater Electrolysis through Intercalation Engineering of Layered Double Hydroxides

Complementary Multisite Turnover Catalysis toward Superefficient Bifunctional Seawater Splitting at Ampere‐Level Current Density

In Situ Generation of Molybdate‐Modulated Nickel‐Iron Oxide Electrodes with High Corrosion Resistance for Efficient Seawater Electrolysis

The dynamic anti-corrosion of self-derived space charge layer enabling long-term stable seawater oxidation

Steering surface reconstruction of hybrid metal oxides for efficient oxygen evolution reaction in water splitting and zinc-air batteries

Interfacial Electronic Redistribution via Anionic Modulator for Superb and Highly Stable Water/Seawater Oxidation

Mo-Induced Surface Reconstruction in Ni/Co-OOH Prickly Flower Clusters for Improving the Hydrogen Production in Alkaline Seawater Splitting

In Situ Regulating Cobalt/Iron Oxide‐Oxyhydroxide Exchange by Dynamic Iron Incorporation for Robust Oxygen Evolution at Large Current Density

Self-protecting CoFeAl-layered double hydroxides enable stable and efficient brine oxidation at 2 A cm −2

Highly efficient electrocatalytic seawater splitting to produce hydrogen with an amorphous medium-entropy oxide electrocatalyst (Co0·40Ni0·30Mo0.17Re0.13)O

In situ rapid and deep self-reconstruction of Fe-doped hydrate NiMoO4 for stable water oxidation at high current densities

Economical Iron-Based Catalyst Electrode for Highly Stable Catalytic Industrial-Scale Overall Seawater Splitting