Abstract:Schematic diagram of the formation of the bottom sedimentary structure of the composite material and its application. Conductive composites have attracted much attention due to its high conductivity, stretchability, and sensitivity. However, designing conductive composites with relatively stable conductivity under 100% deformation using simple methods remains a challenge. In this work, we employ a simple and straightforward approach to prepare a poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) solution. Based on the conductivity‐optimized PEDOT:PSS (5.95 S/cm), it was combined with carboxylated acrylonitrile‐butadiene rubber latex (XNBRL) to make a flexible conductive material with a unique bottom‐deposited structure. The incorporation of PEDOT:PSS establishes an interconnected conductive network within the XNBR, enhancing both the tensile strength (from 0.31 to 1.24 MPa) and conductivity of the composites. Remarkably, even at 100% strain, the resistance change (ΔR/R0) in the composite remains minimal (<2), demonstrating its exceptional flexibility and high electrical conductivity while maintaining relatively stable resistance during cyclic stretching at 50% deformation. Moreover, the conductive composite can maintain good relative resistance stability under different tensile rates and different strains. This conductive XNBR/PEDOT:PSS composite has promising application prospects in medical devices, which require relatively stable and high conductivity over a relatively large deformation. Highlights A simple method to increase the electrical conductivity of aqueous PEDOT:PSS. Flexible conductive composite with a small change in ΔR/R0. Enables rigid PEDOT to be used in stretchable electronic devices. Construction of 3D conductive network and bottom deposition structure.

Fabrication of conductive elastic nanocomposites via framing intact interconnected graphene networks

Conductive epoxidized natural rubber nanocomposite with mechanical and electrical performance boosted by hybrid network structures

Constructing 3D Graphene Network in Rubber Nanocomposite via Liquid-Phase Redispersion and Self-Assembly

Constructing 3D Graphene Networks in Polymer Composites for Significantly Improved Electrical and Mechanical Properties

Non-contact Percolation of Unstable Graphene Networks in Poly(styrene-Co-acrylonitrile) Nanocomposites: Electrical and Rheological Properties

Enhancing the thermal and electrical conductivities of silicone rubber composites by constructing a 1D‐3D collaborative network

Preparation of a natural rubber with high thermal conductivity, low heat generation and strong interfacial interaction by using NS-modified graphene oxide

Enhanced Mechanical Properties of Natural Rubber by Block Copolymer-Based Porous Carbon Fibers

A Facile Route to Fabricate Thermally Conductive and Electrically Insulating Polymer Composites with 3D Interconnected Graphene at An Ultralow Filler Loading

Nacre-inspired hierarchical framework enables tough and impact-monitoring epoxy nanocomposites

Electrically Conductive Natural Rubber Composite Films Reinforced with Graphite Platelets

A highly stretchable and conductive polydimethylsiloxane/nickel‐coated graphite composite prepared by a facile sedimentation method by adjusting interface effects

Facile Fabrication of Multifunctional Polymer Composites Based on Three-Dimensional Interconnected Networks of Graphene and Carbon Nanotubes

A three-dimensional multilayer graphene web for polymer nanocomposites with exceptional transport properties and fracture resistance

Reinforcement and Toughening of Rubber by Bridging Graphene and Nanosilica

Graphene-Elastomer Composites with Segregated Nanostructured Network for Liquid and Strain Sensing Application.

Thermoreversible XNBR-based conductive composites with dual dynamic networks for strain sensors

Composite Networks: Stress Controllability in Thermal and Electrical Conductivity of 3D Elastic Graphene‐Crosslinked Carbon Nanotube Sponge/Polyimide Nanocomposite (adv. Funct. Mater. 25/2019)

Seeding carbon nanotube microemulsions in elastomer films for hetero-structured porous stretchable composites

Stretchable, stabilized‐conductive XNBR/PEDOT:PSS composites based on bottom‐deposited structure

Thermally conductive thin films derived from defect free graphene-natural rubber latex nanocomposite: Preparation and properties