Abstract:A medium-power, highly-efficient broadband linear power amplifier (PA) is designed in a 40-nm GaN technology that covers the key 5G FR2 band of 24–40 GHz. Load-pull simulations suggest better device broadband performance and peak power-added-efficiency (PAE) around <inline-formula> <tex-math notation="LaTeX">$V_{\text {DD}} =4$ </tex-math></inline-formula>–6 V. Measurement data corroborates the simulations and this PA achieves a small-signal 3-dB bandwidth (BW) of 18.0–40.3 GHz, with max. PAE/<inline-formula> <tex-math notation="LaTeX">$P_{\text {SAT}}$ </tex-math></inline-formula> of 42.1%/18.6 dBm at 28 GHz, and 26.0%/17.2 dBm at 38 GHz at <inline-formula> <tex-math notation="LaTeX">$V_{\text {DD}} = 4$ </tex-math></inline-formula> V. When tested with a 9 MHz <inline-formula> <tex-math notation="LaTeX">$\times \,\, 100$ </tex-math></inline-formula> MHz 256-quadratic-amplitude modulation (QAM) 5G new radio (NR) signal, it achieves an adjacent-channel-leakage-ratio (ACLR) of −27 dBc with <inline-formula> <tex-math notation="LaTeX">$P_{\text {OUT, AVG}}$ </tex-math></inline-formula>/PAE of 11.3 dBm/13.9% at 28 GHz. When compared with state-of-the-art broadband PAs, it achieves the best <inline-formula> <tex-math notation="LaTeX">$S_{21}~3$ </tex-math></inline-formula>-dB BW with excellent peak PAE and linearity. This work also reports the best PAE for broadband medium-power millimeter-wave GaN PA at <inline-formula> <tex-math notation="LaTeX">$P_{\text {SAT}}~\sim 20$ </tex-math></inline-formula> dBm.

Highly efficient 5G linear power amplifiers (PA) design challenges

A Review of 5G Power Amplifier Design at cm-Wave and mm-Wave Frequencies

A High Linearity Class AB Power Amplifier for Sub-1 GHz Applications

25.2 A 19.7-to-43.8ghz Power Amplifier with Broadband Linearization Technique in 28nm Bulk CMOS

Highly Efficient Wideband RF Power Amplifier Design for 5G and Beyond

A low power, highly efficient, linear, enhanced wideband Class-J mode power amplifier for 5G applications

A Highly Efficient 18–40 GHz Linear Power Amplifier in 40-nm GaN for mm-Wave 5G

A 15.6 Dbm P, 24 Db Gain, 24.4%PAE, Linear CMOS Power Amplifier for 5G Application

Design of a Broadband High-Efficiency Doherty Power Amplifier for 5G Communication Systems

Power Up Potential Power Amplifier Technologies for 5G Applications

A review of Doherty power amplifier and load modulated balanced amplifier for 5G technology

An active two-stage class-J power amplifier design for smart grid’s 5G wireless networks

A 1V 32.1 dBm 92-to-102GHz Power Amplifier with a Scalable 128-to-1 Power Combiner Achieving 15% Peak PAE in a 65nm Bulk CMOS Process.

Breaking Bandwidth Limit: A Review of Broadband Doherty Power Amplifier Design for 5G

32.8 A 27.8-to-38.7GHz Load-Modulated Balanced Power Amplifier with Scalable 7-to-1 Load-Modulated Power-Combine Network Achieving 27.2dBm Output Power and 28.8%/23.2%/16.3%/11.9% Peak/6/9/12dB Back-Off Efficiency.

Efficient GaN-on-Si Power Amplifier Design Using Analytical and Numerical Optimization Methods for 24–30 GHz 5G Applications

Design of a W-band High-PAE Class A&AB Power Amplifier in 150nm GaAs Technology

Design of Broadband High-Efficiency DPA for 5G Micro Base Station

A 28/37/39GHz Multiband Linear Doherty Power Amplifier in Silicon for 5G Applications

Design of a broadband bandpass filtering power amplifier for 5G communication

3.5-0Hz High-Efficiency Broadband Asymmetric Doherty Power Amplifier for 5G Applications