Abstract:The unique properties of zeolites, such as their microporous structure and ion exchange capacity, make them a promising material for water treatment applications. This work explores the synthesis of zeolites from coal fly ash (CFA) using the microwave fusion and hydrothermal synthesis method and investigates their effectiveness in removing heavy metal ions, specifically Cu2+, Zn2+, Ni2+, and Pb2+, from an aqueous solution. Moreover, to overcome the challenge of extracting fine zeolite particles from treated water, a novel method using colloidal PVA solutions to bind magnetite nanoparticles to zeolite was used. The obtained magnetic CFA zeolite was investigated for its adsorption performance and ability to be extracted from water. The experiments included the analysis of adsorption kinetics and the determination of both zeolites adsorption capacity in single and mixed ion systems. The results obtained in this study show that the zeolite synthesized from CFA has excellent adsorption properties for the investigated metal ions. Specifically, in a single ion system, the maximum adsorption capacity of CFA-zeolite was calculated as 495 mg/g for Pb2+, 248 mg/g for Cu2+, 177 mg/g for Zn2+, and 130 mg/g for Ni2+. When tested with the same dosage of zeolite in the mixed ions system, the adsorption capacity was found to be 276 mg/g for Pb2+ and 95 mg/g for Cu2+, while Zn2+ and Ni2+ ions were not adsorbed. Furthermore, the results suggest that the magnetic zeolite composite has excellent adsorption properties. Thus, in mixed ions system its maximum adsorption capacity was found as 261 mg/g, 109 mg/g, 45 mg/g and 42 mg/g for Pb2+, Cu2+, Zn2+ and Ni2+ ions, respectively; the selectivity order of Pb2+ > Cu2+ > Zn2+ > Ni2+ was therefore established for both systems. Additionally, magnetic zeolite was shown to be easily separated from the treated solution using high intensity magnetic separation. Various surface characterization techniques were utilized to examine the zeolite's surface before and after the adsorption of metal ions, and the results suggest an ion exchange mechanism for the studied metals. Overall, this study further highlights the potential of CFA-synthesized zeolites for the removal of heavy metal pollutants from wastewater and provides insights into the mechanisms underlying their adsorption behavior. Moreover, it was demonstrated that the synthesized magnetic CFA zeolite has potential for practical water treatment applications as an effective and sustainable material for the removal of heavy metal pollutants from wastewater. Further investigations are necessary to optimize the use of CFA magnetic zeolites for practical water treatment applications.

High-performance MnO 2 embedded fly ash zeolite applied for effective mineralization of bisphenol-A and sorption of congo red: Mechanism, real water application, and toxicity assessment

Stable Incorporation of MnOx Quantum Dots into N-doped Hollow Carbon: A Synergistic Peroxymonosulfate Activator for Enhanced Removal of Bisphenol A

Fe3C-porous carbon derived from Fe2O3 loaded MOF-74(Zn) for the removal of high concentration BPA: The integrations of adsorptive/catalytic synergies and radical/non-radical mechanisms

Activation of peroxymonosulfate by ZIFs derived Fe/Cu encapsulated N-doped carbon for bisphenol A degradation: The role of N doping

Comparative study of ZIF-8-materials for removal of hazardous compounds using physio-chemical remediation techniques

Mechanistic Study of Oxidative Removal of Bisphenol A by Pristine Nanocatalyst Mn3O4/peroxymonosulfate

Zeolite synthesis from coal fly ash and its application to heavy metals remediation from water contaminated with Pb, Cu, Zn and Ni ions

Eco-friendly approach for effective removal for Congo red dye from wastewater using reusable Zn-Al layered double hydroxide anchored on multiwalled carbon nanotubes supported sodium dodecyl sulfonate composites

Ferrocene doped ZIF-8 derived Fe-N-C single atom catalyst to active peroxymonosulfate for removal of bisphenol A

Enhanced removal of Pb 2+ and Congo red from aqueous solutions using hierarchically porous melamine sponge/polyvinyl alcohol/Zr-MOF composites

Simultaneous removal of inorganic and organic pollutants from multicomponent solutions by the use of zeolitic materials obtained from fly ash waste

Degradation of Bisphenol A by Nitrogen-Rich ZIF-8-Derived Carbon Materials-Activated Peroxymonosulfate

Carbonizing hollow metal–organic framework/layered double hydroxide (MOF/LDH) nanocomposite with excellent adsorption capacity for removal of Pb(II) and organic dyes from wastewater

Simultaneous removal of Methylene blue and Cadmium from aqueous solution by a novel sulfonated material: Characterization, mechanism and application

Effective Magnetic MOFs Adsorbent for the Removal of Bisphenol A, Tetracycline, Congo Red and Methylene Blue Pollutions

Synergistic impact of Fe-Zr in novel hybrid aminoclay catalytic TFC membrane for ultrafast emerging pollutant remediation

Amino-modified metal–organic frameworks as peroxymonosulfate catalyst for bisphenol AF decontamination: ROS generation, degradation pathways, and toxicity evaluation

Iron Oxide NPs Facilitated a Smart Building Composite for Heavy-Metal Removal and Dye Degradation

Effective peroxydisulfate activation by CQDs-MnFe 2 O 4 @ZIF-8 catalyst for complementary degradation of bisphenol A by free radicals and non-radical pathways

Effective adsorption of fluorescent congo red azo dye from aqueous solution by green synthesized nanosphere ZnO/CuO composite using propolis as bee byproduct extract

Synergism between Polyethyleneimine, Graphene Oxide, and MgFeAl-Layered Triple Hydroxide in Removing Acid Red 1 dye and Bisphenol A from Contaminated Water Samples