Visible or Near-Infrared Light Self-Powered Photodetectors Based on Transparent Ferroelectric Ceramics

Geng Huangfu,Hongyuan Xiao,Lin Guan,Haoyin Zhong,Cheng Hu,Zhiwen Shi,Yiping Guo

DOI: https://doi.org/10.1021/acsami.0c09991

2020-07-07

Abstract:Transparent ferroelectrics, with promising prospects in transparent optoelectronic devices, have unique advantages in self-powered photodetection. The self-powered photodetectors based on the photovoltaic effect have quicker responses and higher stability compared with those based on the pyroelectric effect. However, the ferroelectric ceramics previously applied are always opaque and have no infrared light-stimulated photovoltaic effect. Thus, it would be very meaningful to design photodetectors based on infrared light-stimulated photovoltaic effect and/or transparent ferroelectric ceramics. In this work, highly optical transparent pristine lead lanthanum zirconate titanate (PLZT) and band gap-engineered Ni-doped PLZT ceramics with excellent piezoelectric/ferroelectric properties were prepared by hot-pressing sintering. Stable and excellent photovoltaic performance was obtained for pristine PLZT and band gap-engineered PLZT. The value of short-circuit current density is at least 2 orders of magnitude larger than those in PLZT reported in previous works. The transparent PLZT and Ni-doped PLZT ferroelectric ceramics are applied as self-powered photodetectors for the first time for 405 nm and near-infrared light, respectively. The devices based on PLZT under 405 nm light exhibit high detectivity (7.15 × 10⁷ Jones) and quick response (9.5 ms for rise and 11.5 ms for decay), and those devices based on Ni-doped PLZT, under near-infrared light filtered from AM 1.5 G simulated sunlight, also exhibit high detectivity (6.86 × 10⁷ Jones) and short response time (8.5 ms), both presenting great potential for future transparent photodetectors.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c09991?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c09991</a>.Photos of PLZT8 and PLZT9, microstructure and composition of PLZT9 and PLZTN9, influence of temperature on relative permittivity (ε_r) and dielectric loss (tan δ) of the four materials in this article, curves of (α<i>h</i>ν)² versus <i>h</i>ν, <i>J</i>–<i>V</i> (current density vs voltage) curves of PLZTN9 illuminated by 405 nm light, and <i>J</i>–<i>V</i> and <i>J</i>–<i>t</i> curves of PLZTN9 and PLZT8 under 1300 nm light (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c09991/suppl_file/am0c09991_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to design a self - powered photodetector based on transparent ferroelectric ceramics, especially a photodetector that can respond to visible or near - infrared light. Traditionally, ferroelectric ceramic materials used in photoelectric applications are often opaque and do not have the photovoltaic effect excited by infrared light. Therefore, it is of great significance to design photodetectors with the photovoltaic effect excited by infrared light or transparent ferroelectric ceramics.

Specifically, the paper studied highly optically transparent pristine lead lanthanum zirconate titanate (PLZT) and nickel - doped PLZT ceramics prepared by band - engineering. These materials have excellent piezoelectric/ferroelectric properties. It was found that these materials exhibit stable and excellent photovoltaic performance under 405 nm and near - infrared light, and their short - circuit current density is at least two orders of magnitude higher than that of previously reported PLZT materials. In addition, the device based on PLZT has a detectivity as high as 7.15×10^7 Jones under 405 nm light, and the response time is only 9.5 ms (rise) and 11.5 ms (decay). The device based on nickel - doped PLZT also has a detectivity of 6.86×10^7 Jones under near - infrared light, and the response time is only 8.5 ms, showing great potential for future applications of transparent photodetectors.

In conclusion, this paper aims to develop efficient, self - powered transparent photodetectors that can work under visible and near - infrared light through band - engineering and material design, thereby expanding the application range of ferroelectric materials in the photoelectric field.