Abstract:The adoption of lean premixed prevaporised combustion systems can reduce NOx emissions from gas turbines, but unfortunately also increases their susceptibility to thermoacoustic instabilities. Initially, acoustic waves can produce heat release fluctuations by a variety of mechanisms, often by perturbing the equivalence ratio. If correctly phased, heat release fluctuations can subsequently generate more acoustic waves, which at high amplitude can result in significant structural damage to the combustor. The prediction of this phenomenon is of great industrial interest. In previous work, we have coupled a physics based, kinematic model of the flame with a network model to provide the planar acoustic response necessary to close the feedback loop and predict the onset and amplitude of thermoacoustic instabilities in a lab-scale, axisymmetric single burner combustor. The advantage of a time domain approach is that the modal interaction, the influence of harmonics, and flame saturation can be investigated. This paper extends this approach to more realistic, annular geometries, where both planar and circumferential modes must be considered. In lean premixed prevaporised combustors, fluctuations in equivalence ratio have been shown to be a dominant cause of unsteady combustion. These can occur, for example, due to velocity perturbations in the premix ducts, which can lead to equivalence ratio fluctuations at the fuel injectors, which are subsequently convected downstream to the flame surfaces. Here, they can perturb the heat release by locally altering the flame speed, enthalpy of combustion, and, indirectly, the flame surface area. In many gas turbine designs, particularly aeroengines, the geometries are composed of a ring of premix ducts linking a plenum and an annular combustor. The most unstable modes are often circumferential modes. The network model is used to characterise the flow response of the geometry to heat fluctuations at an appropriate location, such as the fuel injectors. The heat release at each flame holder is determined in the time domain using the kinematic flame model derived, as a function of the flow perturbations in the premix duct. This approach is demonstrated for an annular ring of burners on a in a simple geometry. The approach is then extended to an industrial type gas turbine combustor, and used to predict the limit cycle amplitudes.

Longitudinal and azimuthal thermoacoustic modes in a pressurized annular combustor with bluff-body-stabilized methane-hydrogen flames

Experimental Study on Self-Excited Thermoacoustic Instabilities and Intermittent Switching of Azimuthal and Longitudinal Modes in an Annular Combustor

Multi-bifurcation behaviors of stability regimes in a centrally staged swirl burner

Intermittency transition to azimuthal instability in a turbulent annular combustor

Local Flame And Flow Properties Of Propagating Premixed Turbulent Flames During Light-Round Process In A Micca-Type Annular Combustor

Numerical Investigation of the Combustion and Thermoacoustic Characteristics in an Annular Combustor with Hydrogen

Self-Excited Second-Order Azimuthal Thermoacoustic Instabilities in an Annular Combustor with Oblique-Injecting Swirling Burners

Large eddy simulation and low-order modelling of azimuthal thermoacoustic instability in a gas turbine model annular combustor

Numerical investigation of azimuthal thermoacoustic instability in a gas turbine model combustor

Thermoacoustic Instabilities in an Annular Rotating Detonation Combustor under Off-Design Condition

An analytical study of the effect of flame response to simultaneous axial and transverse perturbations on azimuthal thermoacoustic modes in annular combustors

Flame dynamics during intermittency and secondary bifurcation to longitudinal thermoacoustic instability in a swirl-stabilized annular combustor

The damping and locking of self-excited azimuthal modes by baffles installed in the plenum of an annular combustor

Investigation of Longitudinal Self-Excited Combustion Instability in a Micromix Hydrogen Combustor

Low-Order Modelling of the Response of Ducted Flames in Annular Geometries

Predicting thermoacoustic stability characteristics of longitudinal combustors using different endpoint conditions with a low Mach number flow

Experimental Study on Acoustic and Flame Responses in an Annular Combustor under Azimuthal Force

Nonlinear Dynamic Characteristics of Self-Excited Thermoacoustic Instabilities in Premixed Swirling Flames

Experimental investigation of lean-premixed hydrogen combustion instabilities in a can-annular combustion system

Thermoacoustic Instability Characteristics and Flame/Flow Dynamics in a Multinozzle Lean Premixed Gas Turbine Model Combustor Operated with High Carbon Number Hydrocarbon Fuels

An Analytical Study of the Flame Dynamics of a Transversely Forced Asymmetric Two-Dimensional Bunsen Flame