Abstract:The increasing concerns regarding the rapid depletion of fossil fuels and their environmental footprint have prompted a strong worldwide interest in the exploration of inexpensive and eco-friendly energy storage technologies. 1 Layered sodium oxides, particularly O3-type layered compounds, have been extensively studied due to their adequate capacity and well-established chemistry which was inherited from LIB technologies. So far, various chemical compositions have been introduced through different transition metal substitutions (Ni, Co, Mn, and Fe) such as Na[Ni x Fe y Mn z ]O 2 or Na[Ni x Co y Mn z ]O 2 . 2-4 A surface-modified O3-type Na[Ni 0.6 Co 0.2 Mn 0.2 ]O 2 cathode was covered by Al 2 O 3 nanoparticle using a simple dry ball-milling route. The nanoscale Al 2 O 3 particles (∼15 nm in diameter) densely covering the spherical O3-type Na[Ni 0.6 Co 0.2 Mn 0.2 ]O 2 cathode particles effectively minimized parasitic reactions with the electrolyte while assisting Na + migration. The proposed Al 2 O 3 coated Na[Ni 0.6 Co 0.2 Mn 0.2 ]O 2 cathode showed a high specific capacity of 151 mA h g −1 , as well as improved cycling performance and rate capability in a half cell. Furthermore, the Al 2 O 3 coated cathode was scaled up to a pouch-type full cell using a hard carbon anode that exhibited a superior rate capability and capacity retention of 75% after 300 cycles with a high energy density of 130 W h kg −1 . In addition, the post-mortem surface characterization of the cathodes from the long-term cycled full cells cooperated with identifying the specific mechanism of the surface reaction with the electrolyte and the reason for its subsequent degradation and showed that the nano-size Al 2 O 3 coating layer was effective at resolving the degradation pathways of the cathode surface from hydrogen fluoride (HF) attack. References J.-Y. Hwang, S.-T. Myung and Y.-K. Sun, Soc. Rev. , 2017, 46 , 3529–3614. J.-Y. Hwang, S.-T. Myung, D. Aurbach and Y.-K. Sun, Power Sources , 2016, 324 , 106–112. J.-Y. Hwang, S.-M. Oh, S.-T. Myung, K. Y. Chung, I. Belharouak and Y.-K. Sun, Nat. Commun. , 2014, 6 , 6856. J.-Y. Hwang, C. S. Yoon, I. Belharouak and Y.-K. Sun, J. Mater. Chem. A , 2016, 4 , 17952–17959.

Resolving the degradation pathways of the O3-type layered oxide cathode surface through the nano-scale aluminum oxide coating for high-energy density sodium-ion batteries

La-doped O3-type Layered Oxide Cathode with Enhanced Cycle Stability for Sodium-Ion Batteries

Resolving the Degradation Mechanism of the O3-Type Layered Oxide Cathode Surface through the Nano-Size Aluminum Oxide Coating for High-Energy Density Sodium-Ion Batteries

Correction: Enhanced structural stability and overall conductivity of Li-rich layered oxide materials achieved by a dual electron/lithium-conducting coating strategy for high-performance lithium-ion batteries

Correction: Composite Sodium Metal Anodes for Practical Applications

Correction: Achieving highly efficient CO 2 to CO electroreduction exceeding 300 mA cm −2 with single-atom nickel electrocatalysts

Correction: Influence of microstructure evolution on the discharge properties of the Al–Mg–Sn–Ga–In anode for Al–air batteries

Correction: An oxygen-blocking oriented multifunctional solid–electrolyte interphase as a protective layer for a lithium metal anode in lithium–oxygen batteries

Correction: Novel composite of ZnMoO 4 /Ni(OH) 2 as an electrode material for enhanced performance in energy-storage applications

Correction: Exfoliation of Amorphous Phthalocyanine Conjugated Polymers into Ultrathin Nanosheets for Highly Efficient Oxygen Reduction

Correction: Improving the performance of a SnS2 cathode with interspace layer engineering using a Na+ insertion/extraction method for aqueous zinc ion batteries

Correction: Few-layer TiO2–B Nanosheets with N-doped Graphene Nanosheets As a Highly Robust Anode for Lithium-Ion Batteries

Correction: Preferred Planar Crystal Growth and Uniform Solid Electrolyte Interfaces Enabled by Anion Receptors for Stable Aqueous Zn Batteries

Correction: Porous RuO 2 -Co 3 O 4 /C nanocubes as high-performance trifunctional electrocatalysts for zinc–air batteries and overall water splitting

Correction: Hierarchical Co/MoNi heterostructure grown on monocrystalline CoNiMoOx nanorods with robust bifunctionality for hydrazine oxidation-assisted energy-saving hydrogen evolution

Correction: Mesoporous polyvalent Ni–Mn–Co–O composite nanowire arrays towards integrated anodes boosting high-properties lithium storage

Correction: Metal Chalcogenide-Associated Catalysts Enabling CO2 Electroreduction to Produce Low-Carbon Fuels for Energy Storage and Emission Reduction: Catalyst Structure, Morphology, Performance, and Mechanism

Correction: Highly stable zinc metal anode enabled by oxygen functional groups for advanced Zn-ion supercapacitors

High‐Entropy Phase Stabilization Engineering Enables High‐Performance Layered Cathode for Sodium‐Ion Batteries (Adv. Energy Mater. 23/2024)

Correction: Corrigendum: Multi-shelled Metal Oxides Prepared Via an Anion-Adsorption Mechanism for Lithium-Ion Batteries

Surface Engineering Suppresses the Failure of Biphasic Sodium Layered Cathode for High Performance Sodium‐Ion Batteries