Abstract:Investigating the coupling effects of temperature levels and number of heating-water cooling cycles on thermal damage, cracking failure mechanisms, and mechanical responses of HDR (hot dry rock) is a vital issue during the exploitation of geothermal energy. In this study, a large number of granite samples exposed to high temperature treatment (25, 150, 300, 450, 600 °C) with multiple heating and water cooling cycles (1, 5, 10, 15) were carried out micro observations of X-ray diffraction (XRD) and scanning electron microscopy (SEM), and uniaxial compression tests with acoustic emission (AE) signals monitoring. The results show that, as the temperature level or number of heating and water cooling cycles increases, uniaxial compressive strength, elastic modulus, crack damage stress, and the damage index all present a reduction, while the peak axial strain, dilatancy volumetric strain and Poisson’s ratio increase. A genetic algorithm is established to evaluate the coupling influences of temperature and number of heating-water cooling cycles on the uniaxial compressive strength and dilatancy volumetric strain. The AE activities tend to be active due to crack initiation, development and coalescence. For a large temperature level or number of cycles, the AE signals remain active during the whole deformation process, while increase rate of the accumulated AE counts with time gradually slows down. The granites undergo a typical splitting failure mode, characterized by several tensile cracking planes at a low temperature or number of cycles, but present complicated crack networks of a turtle shape with increasing temperature or number of cycles, resulting in a larger fractal dimension of the induced surface cracks. The failure mechanism of rock gradually transfers from brittleness-dominated to ductility-dominated due to accumulated thermal damage. Then, the micro thermal damage mechanism of uncompressed granites is analyzed through microscopic observations of XRD and SEM. A power function is proposed to describe the relations between longitudinal wave velocity and uniaxial compressive strength. With increasing temperature or number of cycles, the maximum diffraction intensity of quartz decreases by 25.82%–38.89% and 13.42%–31.93%, respectively, and the micro thermal defects gradually develop, resulting in weakened macro bearing capacity.Article highlightsHeating and water cooling cycles effects on mechanical properties of granites.Heating and water cooling cycles effects on micro thermal damage and failure mechanisms of granites.Micro mechanisms for the macro strength responses.

Radial impact fracture characteristics and crack initiation criterion of concentric perforated granite after high temperature-water cycle

Study on the dynamic characteristics of rock surrounding a wellbore in energy storage areas during deep geothermal energy mining

Experimental and Numerical Simulation Study on the Mechanism of Fracture-Increasing and Permeability-Increasing in Granite Pore Walls by the Air DTH Hammer Percussion Drilling

Thermo-mechanical Coupling Characteristics of Granite under Triaxial Pressures and Ultrahigh Heating Rates

Cracking process and microstructural characteristics of granite under heating–cooling alternations

The role of multiple heating and water cooling cycles on physical and mechanical responses of granite rocks

Impacts of different cooling methods on the dynamic tensile properties of thermal-treated granite

Analysis of physical and mechanical properties of granite under different cooling methods under high-temperatures thermal cycles

Effect of heating–water cooling cycle treatment on the pore structure and shear fracture characteristics of granite

Investigation of the Mechanical and Permeability Evolution Effects of High-Temperature Granite Exposed to a Rapid Cooling Shock with Liquid Nitrogen

Experimental investigation on the mechanical properties of thermally damaged granite specimens containing pre‐existing holes

Dynamic response and fracture characteristics of thermally-treated granite under dynamic loading

Static and dynamic failure mechanisms of circular granite under the condition of water-heat cycles

Multiscale damage and thermal-stress evolution characteristics of rocks with thermal storage potential under thermal shocks

Microcracking behavior and damage mechanism of granite subjected to high temperature based on CT-GBM numerical simulation

Influence of fracture parameters on hydraulic shear seepage characteristics of granite

Study on the failure mechanism of high-temperature granite under two cooling modes

Pore Structure and Damage Evaluation of Hot Dry Rocks in Enhanced Geothermal System by Combining Electrical Resistivity, Ultrasonic Waves and Nuclear Magnetic Resonance

Experimental study of the influence of temperature and cooling method on dynamic mechanical properties and damage of granite

Fractal Characteristics and Energy Dissipation of Granite After High-Temperature Treatment Based on SHPB Experiment

Investigation on physico-mechanical properties and microstructural evolution patterns of heated granite after liquid nitrogen cooling