Modeling and optimization of piezoelectric and dielectric properties of poled PVDF/BT nanocomposites

Amal Megdich,Mohamed Habibi,Luc Laperrière
DOI: https://doi.org/10.1007/s00289-024-05157-5
IF: 2.843
2024-02-06
Polymer Bulletin
Abstract:Poling parameters and barium titanate (BT) content significantly affect the piezoelectric and dielectric properties of poly(vinylidene fluoride) (PVDF). Selecting the best possible values for these process parameters is indeed a significant challenge. In this study, piezoelectric nanocomposites for high-energy conversion were prepared by mixing PVDF with BT. The dependence of piezoelectric and dielectric properties on process parameters was investigated. The input parameters, including poling temperature, time and voltage, and BT mass fraction, were considered as input variables. A Box-Behnken Design was used to design and analyze the experiments. ANOVA was performed to study the significance of poling parameters and BT mass fraction. An Artificial Neural Network was used to model PVDF-based nanocomposite properties as a function of the four process parameters. A genetic algorithm was applied to search for the optimal poling conditions and BT mass fraction. The optimal combination leads to a d33 coefficient of 25.259 pC/N, a permittivity of 24.282, and a β-phase fraction (F(β)) of 95.435%. These results were experimentally validated, and the errors were 9.789, 0.338, and 0.305%, respectively. Following the optimization, a PVDF-based nanocomposite with excellent piezoelectric and dielectric properties (d33 = 28pC/N, permittivity = 24.2, F(β) = 95.7%) was fabricated for energy conversion applications.
polymer science
What problem does this paper attempt to address?