Abstract:Piezoelectric poly(vinylidene fluoride) (PVDF) polymer exhibits the flexible characteristic, however, a piezo-generator based on the PVDF polymer normally shows low power density because of its low piezoelectric coefficient. Here, we report a fundamental synergistic strategy to prepare PVDF polymer nanocomposite for enhancing electromechanical coupling performance and improving its energy density, including (i) the mechanically directional stress field (MDSF) fabrication of PVDF nanocomposite doped with polar Pb(Zr,Ti)O 3 (PZT) ceramic nanoparticles via high-energy ball milling, (ii) introduction of micro-cavities holding polar nanoparticles, and (iii) floating electrode (Ag) films spaced uniformly inside the polymer nanocomposite. The investigations reveal that the MDSF fabrication can induce ordered, chain-shape nanocrystalline fibers with a high β-crystal phase, which makes 42 % contribution to the piezoelectricity; while the micro-cavities and floating electrode films after poling exhibit a strong electret effect, which further make 18 % and 27 % contributions, respectively, to the piezoelectricity. This multiple-mechanism synergistic effect results in a much higher piezoelectric coefficient d 33 increased from 4 pC N −1 for a pure PVDF (without bearing a uniaxial stretching) to 33 pC N −1 for the nanocomposite. It further dramatically increases to 228 pC N −1 , a giant apparent piezoelectric charge coefficient d 33 * , for a 3D-printed 7-layer nanocomposite with 360 μm in thickness. An energy harvester (EH) based on the PVDF nanocomposite generates a record high peak power density of 13.2 mW cm −2 and the load power density of 5.46 mW cm −2 under a dynamic pressure of 255 kPa at the frequency of 5 Hz, which is near two orders of magnitude higher than that of a conventional PVDF polymer EHs. The fabricated flexible EH can even directly light up 46 LEDs in real-time or power a blind-man reading system when touching it. This work is of great significance in enlightening future flexible piezoelectronic designs.

Significantly Enhanced Poling Efficiency of Piezocomposites by Tuning Resistivity of a Polymer Matrix

Enhancing piezoelectricity of low-temperature-sintered PZT–BNZ ceramics by pulse poling

High-performance piezoelectric composites via β phase programming

A study of epoxy based polymer composites: Tailoring mechanical and piezoelectric characteristics

Enhanced energy density in piezoelectric PVDF-polymer nanocomposite via multiple mechanism synergetic action

Alternating current polarization to enhance piezoelectric performance of single crystal composites

Interface modulated 0-D piezoceramic nanoparticles/PDMS based piezoelectric composites for highly efficient energy harvesting application

Interface Optimizing Core-Shell PZT@Carbon/Polyurethane Composites with Enhanced Passive Piezoelectric Vibration Damping Performance

Computation-guided Design of Flexible Piezoelectric Composites by Optimizing Charge-Stress Transmission

Insight into Interfacial Polarization for Enhancing Piezoelectricity in Ferroelectric Nanocomposites

Preparation of high piezoelectric and flexible polyvinylidene fluoride nanofibers via lead zirconium titanate doping

Nanosheet‐Doped Polymer Composites with High Intrinsic Piezoelectric Properties for Energy Harvesting

Multilayer nanocomposite films with enhanced piezoelectric properties doping PZT nanofibers

Mechanisms for Enhancing Polarization Orientation and Piezoelectric Parameters of PVDF Nanofibers

Large-scale fabrication and performance improvement of polyvinylidene fluoride piezoelectric composite films

Coupling of Interface Effects and Porous Microstructures in Translucent Piezoelectric Composites for Enhanced Energy Harvesting and Sensing

Enhanced electromechanical coupling in Pb(ZrTi)O3 piezoelectric composite via poly(vinylidene fluoride‐trifluoroethylene) clamping

Performance enhancement of 1–3 piezoelectric composite materials by alternating current polarising

Boosting the Piezoelectric Response and Interfacial Compatibility in Flexible Piezoelectric Composites via DET-Doping BT Nanoparticles

Significantly Enhanced the Energy Density of Dielectric Composites by Sandwich Structure with Highly Insulating Mica Nanosheets

Modeling and optimization of piezoelectric and dielectric properties of poled PVDF/BT nanocomposites