Abstract:Achievement of carbon materials with particular structures, dimensions, and sizes derived from metal organic frameworks (MOFs) with particular morphologies is very crucial for purpose-oriented applications such as Li–S batteries in which little is known about carbon structures from low melting point indium-based MOFs (In-MOFs). Here, we pioneeringly prepared a 3D cotton-pad-like hierarchically porous carbon (CPHPC) structure stacked by hexagonal highly graphitized carbon nanosheets based on In-MOFs synthesized at room temperature, which was demonstrated to be the effective sulfur host for Li–S batteries. The cathodes exhibit excellent rate performance with reversible capacities of 1349 and 691 mA h g<sup>–1</sup> at 0.2 and 20 C, respectively, and admirable cycling performance with quite low decay rates of 0.033% per cycle for 1000 cycles at 0.5 C and 0.014% per cycle for 3800 cycles at 10 C. The admirable electrochemical performances are ascribed to the superior conductivity resulting from the 3D highly graphitized carbon conductive network, the effective confinements of polysulfides arising from sufficient contact between the carbon host and sulfur, and the high stability of rigid structures stacked by porous nanosheets. This easily achieved unique carbon structure and its derivatives in the form of carbon have a critical role to play in the performances of not only Li–S batteries but also lithium-ion batteries, supercapacitors, catalysis, and chemical absorption.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00203?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00203</a>.XRD profiles, SEM images, TEM images, TG curve, nitrogen adsorption/desorption isotherms, and adsorption tests of synthesized materials; rate and cycling performances and Nyquist plots of corresponding cells; and performance statistics of similar Li–S batteries in the literature (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00203/suppl_file/ae1c00203_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Gradually anchoring sulfur into in-situ doped carbon substrate as cathode for Li–S batteries with excellent wide-temperature performance

New Insight into the Working Mechanism of Lithium–Sulfur Batteries under a Wide Temperature Range

Sulfur-infiltrated porous carbon microspheres with controllable multi-modal pore size distribution for high energy lithium–sulfur batteries

Polar and Conductive Iron Carbide@n-Doped Porous Carbon Nanosheets As a Sulfur Host for High Performance Lithium Sulfur Batteries

Promoting sulfur immobilization by a hierarchical morphology of hollow carbon nanosphere clusters for high-stability Li–S battery

Confinement of Sulfur Species into Heteroatom-Doped, Porous Carbon Container for High Areal Capacity Cathode

Silicon dioxide molecular sieve with mono-layer carbon deposited in the channels and carbon nanotubes on the outside for lithium–sulfur batteries

Dodecylamine‐Induced Synthesis of a Nitrogen‐Doped Carbon Comb for Advanced Lithium–Sulfur Battery Cathodes

Built‐in Carbon Nanotube Network Inside a Biomass‐Derived Hierarchically Porous Carbon to Enhance the Performance of the Sulfur Cathode in a Li‐S Battery

Inverse Fabrication of Li 2 S‐Nanocrystals@Doped‐Carbon Loaded on Woven Carbon Fibers to Spatial Structure Cathodes for High‐Stable Lithium–Sulfur Batteries

Constructing Wide‐Temperature Lithium–Sulfur Batteries by Using a Covalent Organic Nanosheet Wrapped Carbon Nanotube

Entrapment of sulfur in hierarchical porous graphene for lithium-sulfur batteries with high rate performance from -40 to 60°C

Confining Sulfur in N-Doped Porous Carbon Microspheres Derived from Microalgaes for Advanced Lithium-Sulfur Batteries.

Self-templating synthesis of prismatic-like N-doped carbon tubes embedded with Fe3O4 as a high-efficiency polysulfide-anchoring-conversion mediator for high performance lithium-sulfur batteries

A compact 3D interconnected sulfur cathode for high-energy, high-power and long-life lithium-sulfur batteries

Porous Carbon Architecture Assembled by Cross-Linked Carbon Leaves with Implanted Atomic Cobalt for High-Performance Li–S Batteries

3D Cotton-Pad-Like Hierarchically Porous Structure Stacked by Hexagonal Highly Graphitized Carbon Nanosheets as Sulfur Immobilizers for Li–S Batteries

Vanadium nitride nanocrystals decorated ultrathin, N-rich and hierarchically porous carbon nanosheets as superior polysulfides mediator for stable lithium-sulfur batteries

Self-reduction preparation of porous multi-walled ZnCo2O4 spheres as sulfur host for lithium‐sulfur battery cathodes with long cycling life and stable rate-performance

Nitrogen-doped Carbonaceous Scaffold Anchored with Cobalt Nanoparticles As Sulfur Host for Efficient Adsorption and Catalytic Conversion of Polysulfides in Lithium-Sulfur Batteries

Facile fabrication of sponge-like porous carbon confined SnS architectures by hetero temperature field calcination for superior Li-ion storage