Abstract:Transition is a prominent flow phenomenon in turbomachinery, especially at low and moderate Reynolds numbers. The turbomachinery internal flow often encounters complex vortex structures, typically accompanied by strong turbulence anisotropy and non–equilibrium. Conventional Reynolds–averaged Navier–Stokes (RANS) modeling with linear eddy–viscosity models (LEVMs) may fail short in capturing certain complex flow features. The Reynolds stress model (RSM) based on a higher turbulence closure level has more potential to reasonably consider turbulence anisotropy and non–equilibrium for such complex flows within turbomachinery than the LEVMs. However, the current RSM lacks an effective representation of transition phenomena. This paper presents an improved prediction of turbomachinery flows using RSM with transition modeling. The transition effects are incorporated into the RSM (SSG/LRR–ω model) via Menter's γ transport equation. The blending of the SSG/LRR–ω model with the γ transition model (SSG/LRR–ω–γ model) is firstly validated based on the T3 series flat plate cases with zero pressure gradient (T3A, T3B, T3A–) and variable pressure gradients (T3C1–C5). Comparisons with experiments show that the SSG/LRR–ω–γ model predicts corner separation flows with transition more accurately, although there is still room for further improvement. Then, the performance of the SSG/LRR–ω–γ model is assessed in a linear highly loaded prescribed velocity distribution (PVD) cascade and a NACA65 K48 compressor cascade. Comparisons with experiments indicate that, in both compressor cascades, the SSG/LRR–ω–γ model can predict more accurately corner flows with boundary layer transition on suction surfaces than the SSG/LRR–ω and SST model. Nevertheless, it still exhibits a tendency to overestimate the size of corner separation, especially in cases characterized by strong adverse pressure gradients. Comparisons of skin friction and velocity profiles predicted by the SSG/LRR–ω model with and without transition modeling illustrate the rationale behind the improved prediction. Further improvement of the SSG/LRR–ω–γ model for predicting turbomachinery corner flows should be conducted in future.

Replicating transition with modified Spalart–Allmaras model

Gas-Kinetic Scheme Coupled with Turbulent Kinetic Energy Equation for Computing Hypersonic Turbulent and Transitional Flows

Assessment of the shear-improved Smagorinsky model in laminar-turbulent transitional channel flow

Boundary-layer Transition Prediction Using a Simplified Correlation-Based Model

Application of simplified threeGequation transition model in hypersonic flow

Smooth Local Correlation-Based Transition Model for the Spalart–Allmaras Turbulence Model

Coupling of Eddy-Viscosity-Scale Reynolds-Stress Model with an Algebraic Transition Model

Application of γ-Reθt-SA transition model in numertical simulation of flows around airfoils

Validation of correlations-based transition modeling strategies applied to the Spalart-Allmaras turbulence model for the computation of separation-induced transition

Modelling Flow Transition in a Hypersonic Boundary Layer with Reynolds-averaged Navier-Stokes Approach

PROGRESS IN TURBULENCE/TRANSITION MODELLING

A Two-Equation Local-Correlation-based Laminar-Turbulent Transition Modeling Scheme for External Aerodynamics

A local intermittency based Reynolds-averaged transition model for turbulent mixing induced by interfacial instabilities

A Three-Equation Transition Model with Mechanical Considerations

Integrating Stanford University Unstructured Code with Transition Model

The Research of Cross-Flow Instabilities Transition Prediction Method Based on Spalart-Allmaras-gamma-theta Transition Model

Local Correlation-Based Transition Model for High-Speed Flows

Modeling Separated Flow Transition with a Transport Intermittency Model

Improved Prediction of Turbomachinery Flows Using Reynolds Stress Model with Helicity Modification and Modified 𝜸 Transition Model

Improved Prediction of Turbomachinery Flows Using Reynolds Stress Model with Γ Transition Model

Correlation-Based Transition Transport Modeling for Simulating Crossflow Instabilities