Abstract:High temperature REBCO superconducting tapes are very promising for high-field magnets. Under high magnetic fields there are high electro-mechanical forces, and thus concern for mechanical damage. Due to large screening currents and composite structure of the tape, the mechanical design of these magnets is not straightforward. In addition, many contemporary designs use insulated winding. In this work we develop a novel two-dimensional axisymmetric finite element tool programmed in MATLAB that assumes the displacement field within linear elastic range. The stack of pancakes and a large number of REBCO tape turns are approximated as an an-isotropic bulk hollow cylinder. Our results agree with uni-axial stress experiments in literature, validating the bulk approximation. Here, we study the following configuration. The current is first ramp up to below the critical current and we calculate the screening currents and the forces that they cause using the MEMEP model. As a case study, 32 T REBCO superconductor magnet, is taken and simulated numerically. We have done complete mechanical analysis of the magnet by including the axial and shear mechanical quantities for each pancake unlike previous work where only radial and circumferential quantities are focused. Effect on mechanical quantities without screening current is also calculated and compared. It is shown that including screening current induced field strongly affect the mechanical quantities, specially the shear stress. The latter might be the critical quantity for certain magnet configurations. Additionally, in order to overcome high stresses, a stiff over banding of different material is considered and numerically modelled which significantly reduces the mechanical stresses. The FE based model developed is efficient to calculate the mechanical behaviour of any general superconductor magnet and its devices.

Mechanical Design of Superconducting Accelerator Magnets

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Mechanical Characterization of Low-Carbon Steels for High-Field Accelerator Magnets: Application to Nb$_{3}$Sn Low-$\beta$ Quadrupole MQXF

The Optimal Design of a 300~MJ Superconducting Magnet Using HTS Tapes

Magnetic design constraints of helical solenoids

Magnetic design study of coil-dominated superconducting quadrupole magnets based on racetrack coils

Design and Construction of the Main Magnet for a 230-MeV Superconducting Cyclotron

A Custom Finite-Element Method Framework for Designing Superconducting Solenoidal Magnets and Coils With True HTS Tape Geometry

Design and Analysis of Superconducting Magnets of a New Mixed Maglev Model

Design and Test of Superconducting Magnet for 200 MeV Proton Cyclotron

Simplified magnet design and manufacture based on patterning of wide conductors

A Combined Testing and Modelling Methodology for the Mechanics of High-Field Superconducting Magnets

Electromagnetic Design of HTS D-shaped Coils for a Toroidal-type Superconducting Magnet

Design of an arrangement of cubic magnets for a quasi-axisymmetric stellarator experiment

Producing circular field harmonics inside elliptic magnet apertures with superconducting canted-cosine-theta coils

Magneto-Mechanical Coupling Analysis of a Superconducting Solenoid Magnet in Self-Magnetic Field

Conceptual Design of an HTS Dipole Insert Based on Bi2212 Rutherford Cable

Efficient multiscale investigation of mechanical behavior in Nb3Sn superconducting accelerator magnet based on self-consistent clustering analysis

Optimal design and FEM analysis of the superconducting magnets of EMS-MAGLEV models using Bi-2223 tapes

Modelling the mechanics of 32 T REBCO superconductor magnet using numerical simulation

Analytical methods to calculate electromagnetic stress of superconducting solenoid magnets