Abstract:Abstract At present, there are many studies on the residual stress field and plastic strain field introduced by surface strengthening, which can well hinder the initiation of early fatigue cracks and delay the propagation of fatigue cracks. However, there are few studies on the effects of these key factors on fretting wear. In the paper, shot-peening (SP) and ultrasonic surface rolling process (USRP) were performed on Ti-6Al-4V plate specimens. The surface hardness and residual stresses of the material were tested by vickers indenter and X-ray diffraction residual stress analyzer. Microhardness were measured by HXD-1000MC/CD micro Vickers hardness tester. The effects of different surface strengthening on its fretting fatigue properties were verified by fretting fatigue experiments. The fretting fatigue fracture surface and wear morphology of the specimens were studied and analyzed by means of microscopic observation, and the mechanism of improving fretting fatigue life by surface strengthening process was further explained. After USRP treatment, the surface roughness of Ti-6Al-4V is significantly improved. In addition, the microhardness of the specimen after SP reaches the maximum at 80 μm from the surface, which is about 123% higher than that of the AsR specimen. After USRP, it reaches the maximum at 150 μm from the surface, which is about 128% higher than that of AsR specimen. It is also found that the residual compressive stress of the specimens treated by USRP and SP increases first and then decreases with the depth direction, and the residual stress reaches the maximum on the sub surface. The USRP specimen reaches the maximum value at 0.18 mm, about − 550 MPa, while the SP specimen reaches the maximum value at 0.1 mm, about − 380 MPa. The fretting fatigue life of Ti-6Al-4V effectively improved after USRP and SP. The surface integrity of specimens after USRP is the best, which has deeper residual compressive stress layer and more refined grain. In this paper, a fretting wear device is designed to carry out fretting fatigue experiments on specimens with different surface strengthening.

Effect of ultrasonic rolling on the fatigue performance of laser-welded TC4 titanium alloy joints

On the influence of ultrasonic surface rolling process on surface integrity and fatigue performance of Ti-6Al-4V alloy

Effect of Repeated Processing Passes during Ultrasonic Rolling on Fatigue Performance and Corrosion Resistance of Ti6Al4V Alloy

Improving fatigue performance of Ti-6Al-4V alloy via ultrasonic surface rolling process

Enhanced Fretting Fatigue Strength of TC11 Titanium Alloy Using Laser-Assisted Ultrasonic Surface Rolling Process

Improving Fatigue Performance of Surface-Damaged Ti-6Al-4V Alloy Via Ultrasonic Surface Rolling Process

Effect of three-stage heat treatment on the composite waveform and variable amplitude fatigue properties of TC4 titanium alloy pulsed laser-arc hybrid welded joints

Effect of the Ultrasonic Surface Rolling Process on the Fretting Fatigue Behavior of Ti-6al-4v Alloy

Contribution of Ultrasonic Surface Rolling Process to the Fatigue Properties of TB8 Alloy with Body-Centered Cubic Structure

Influence Of Ultrasonic Surface Rolling On Microstructure And Wear Behavior Of Selective Laser Melted Ti-6al-4v Alloy

Effect of ultrasonic surface rolling process on the fatigue performance of the 7075 aluminum alloy

Effects of Ultrasonic Shot Peening on Fatigue Behavior of TA15 Titanium Alloy Fabricated by Laser Melting Deposition

Study on Surface Integrity and Fatigue Properties of TC4 Titanium Alloy by Surface Ultrasonic Rolling

Impact of Ultrasonic Surface Rolling Processes on Microstructures and Fatigue Properties of 300M Steel Laser-Cladding-Repaired Components

Surface Modification and Its Effect on the Tensile and Fatigue Properties of 300M Steel Subjected to Ultrasonic Surface Rolling Process

Surface Properties and Fatigue Behavior of 6061 Aluminum Alloy by Multi-pass Ultrasonic Surface Rolling Process

Collaborative Improvement of Macro-Deformation and Fatigue Property for Thin-Walled Parts in TA19 Titanium Alloy Via a Double-Sided Simultaneous Ultrasonic Surface Rolling Process

Influence of Ultrasonic Surface Rolling Process and Shot Peening on Fretting Fatigue Performance of Ti-6Al-4V

Enhanced rolling contact fatigue behavior of selective electron beam melted Ti6Al4V using the ultrasonic surface rolling process

Effect of ultrasonic surface rolling on surface layer properties and fretting wear properties of titanium alloy Ti5Al4Mo6V2Nb1Fe

Surface Modification and Its Effect on Fatigue Performance of Nickel-Based Superalloy Treated by Ultrasonic Surface Rolling Process