Abstract:Metal corrosion has recently emerged as a growing concern, impacting both local and industrial operations and disrupting conventional production methods. The utilization of green inhibitors to mitigate the metal degradation has garnered extensive attention from researchers and industrial professionals due to their prominent advantages: high efficiency, cost-effectiveness, and eco-friendliness. A novel ecofriendly inhibitor was prepared from Praecitrullus fistulosus (tinda fruit and peel) for mild steel (MS) corrosion in 1 M HCl. The presence of phenol, 3,5-bis (1,1-dimethyl ethyl)-, 9-octadecenoic acid, methyl ester, hexadecanoic acid 15-methyl-, methyl ester, 9, 12-octadecadienoic acid, methyl ester, 9, 12, 15-octadecatrienoic acid, methyl ester, (Z,Z, Z -), ascorbic acid, and phytol were identified as major constituent through LC/MS analysis of tinda extracts. The existence of these compounds was further confirmed through FTIR analysis, which shows the presence of various functional groups, such as -OH, CO, C-O-C, CC, and aromatic rings in the tinda extracts. Electrochemical and gravimetric analyses were used to investigate the inhibitory effect of tinda extracts. Outcomes of Tafel analysis revealed that both tinda extracts significantly reduced the corrosion current as compared to blank and achieved 83.73 % and 87.59 % inhibition efficiencies at 200 mg L −1 of tinda peel extract (TPE) and tinda fruit extract (TFE), respectively. The change in corrosion potential ( E corr ) was within an ±85 mV range compared to that of the uninhibited system, indicating that both tinda extracts demonstrated a mixed-type inhibition behavior. During adsorption studies, the best fit was obtained for the Langmuir adsorption model. The obtained values of standard Gibbs free energy ( ΔG° ads ) for TPE and TFE lie between −20 and − 40 kJ mol −1 but close to −20 kJ mol −1 , which reveals preferential physical adsorption of the extracts on the metal surface. Thermodynamic parameters, including activation energy, enthalpy, and entropy, were computed across the temperature range of 303 to 323 K, suggesting that corrosion occurs spontaneously by the endothermic process. FESEM analysis depicted that inhibited systems exhibited smooth and crack-free surfaces as compared to blank system. AFM images demonstrated that surface roughness was significantly reduced for the inhibited system. In EDX analysis, the weight percentage of Cl was reduced in the presence of tinda extracts as compared to blank, and in XRD analysis, iron chloride (FeCl 2 ) peak did not appear in the presence of inhibitor but it was in the uninhibited system. All surface-related findings signify that tinda extracts are adsorbed on the MS surface and form a protective layer that separates the metal from the corrosive solution.

Experimental, DFT and MD evaluation of Nandina domestica Thunb. extract as green inhibitor for carbon steel corrosion in acidic medium

N-substituted Methyl Ethylenediamine Derivatives As Corrosion Inhibitors for Carbon Steel in 1 M Hydrochloride Acid

Developing a Novel Imine Derivative As a Corrosion Inhibitor for Q235 Carbon Steel in 1 M HCl Solution: Experiments and Theoretical Calculations

Corrosion inhibition of eco-friendly nitrogen-doped carbon dots for carbon steel in acidic media: Performance and mechanism investigation

Electrochemical and Surface Investigations of N, S Codoped Carbon Dots As Effective Corrosion Inhibitor for Mild Steel in Acidic Solution

Electrochemical and DFT studies of Terminalia bellerica fruit extract as an eco-friendly inhibitor for the corrosion of steel

Betel Nut Shell Water Extract as a Green Corrosion Inhibitor for Q235 Steel in 1 M HCl

Enhanced Corrosion Inhibition of Q235 Steel by N,S Co-Doped Carbon Dots: A Sustainable Approach for Industrial Pickling Corrosion Inhibitors

Turning Waste into Treasure: Invasive Plant Ambrosia trifida L Leaves as a High-Efficiency Inhibitor for Steel in Simulated Pickling Solutions

Nicotinic acid derivatives as corrosion inhibitors for mild steel in hydrochloric acid solutions: an experimental and computational chemistry study

Enhanced Corrosion Resistance of Carbon Steel in Hydrochloric Acid Solution by Eriobotrya Japonica Thunb. Leaf Extract: Electrochemical Study.

Corrosion inhibition of mild steel by Praecitrullus fistulosus (tinda fruit and peel) extracts

Eco-friendly Ginkgo Leaf Extract as a Green Corrosion Inhibitor to Protect N80 Steel in 1 M HCl

Adsorption Mechanism, Kinetics, Thermodynamics, and Anticorrosion Performance of a New Thiophene Derivative for C-Steel in a 1.0 M HCl: Experimental and Computational Approaches

Insight into the anti–corrosion behavior of Reineckia Carnea leaves extract as an eco–friendly and high–efficiency corrosion inhibitor

Preparation and Corrosion Inhibition of N,N, N-Triethylammonium O,O'-Dicyclohexyldithiophosphate

Mikania Micrantha Extract As a Novel Inhibitor for the Corrosion of Cold Rolled Steel in Cl2HCCOOH Solution

Evaluation of the Inhibition Behavior of Carbon Dots on Carbon Steel in HCl and NaCl Solutions

Evaluation of the Potential of Daucus crinitus Extracts and Their Synthesized ZnO Nanoparticles in Inhibiting the Corrosion of Carbon Steel

Corrosion Inhibition, Surface Adsorption and Computational Studies of Momordica Charantia Extract: a Sustainable and Green Approach