Effect of Position of Donor Units and Alkyl Groups on Dye-Sensitized Solar Cell Device Performance: Indoline–Aniline Donor-Based Visible Light Active Unsymmetrical Squaraine Dyes

Amrita Singh,Ambarish Kumar Singh,Ruchi Dixit,Kumar Vanka,Kothandam Krishnamoorthy,Jayaraj Nithyanandhan
DOI: https://doi.org/10.1021/acsomega.4c00123
IF: 4.1
2024-03-26
ACS Omega
Abstract:Indoline (In) and aniline (An) donor-based visible light active unsymmetrical squaraine (SQ) dyes were synthesized for dye-sensitized solar cells (DSSCs), where the position of An and In units was changed with respect to the anchoring group (carboxylic acid) to have In-SQ-An-CO<sub>2</sub>H and An-SQ-In-CO<sub>2</sub>H sensitizers, <b>AS1-AS5</b>. Linear or branched alkyl groups were functionalized with the N atom of either In or An units to control the aggregation of the dyes on TiO<sub>2</sub>. <b>AS1-AS5</b> exhibit an isomeric π-framework where the squaric acid unit is placed in the middle, where <b>AS2</b> and <b>AS5</b> dyes possess the anchoring group connected with the An donor, and <b>AS1</b>, <b>AS3</b>, and <b>AS4</b> dyes having the anchoring group connected with the In donor. Hence, the conjugation between the middle squaric acid acceptor unit and the anchoring -CO<sub>2</sub>H group is short for <b>AS2</b>, <b>AS5</b>, and <b>AK2</b> and longer for <b>AS1</b>, <b>AS3</b>, and <b>AS4</b> dyes. <b>AS</b> dyes showed absorption between 501 and 535 nm with extinction coefficients of 1.46-1.61 × 10<sup>5</sup> M<sup>-1</sup> cm<sup>-1</sup>. Further, the isomeric π-framework of An-SQ-In-CO<sub>2</sub>H and In-SQ-An-CO<sub>2</sub>H exhibited by means of changing the position of In and An units a bathochromic shift in the absorption properties of <b>AS2</b> and <b>AS5</b> compared to the <b>AS1</b>, <b>AS3</b>, and <b>AS4</b> dyes. The DSSC device fabricated with the dyes contains short acceptor-anchoring group distance (<b>AS2</b> and <b>AS5</b>) showed high photovoltaic performances compared to the dyes having longer distance (<b>AS1</b>, <b>AS3</b>, and <b>AS4</b>) with the iodolyte (I<sup>-</sup>/I<sub>3</sub><sup>-</sup>) electrolyte. DSSC device efficiencies of 5.49, 6.34, 6.16, and 5.57% have been achieved for <b>AS1</b>, <b>AS2</b>, <b>AS3</b>, and <b>AS4</b> dyes, respectively; without chenodeoxycholic acid (CDCA), small changes have been observed in the device performance of the <b>AS</b> dyes with CDCA. Significant changes have been noted in the DSSC parameters (open-circuit voltage <i>V</i><sub>OC</sub>, short-circuit current <i>J</i><sub>SC</sub>, fill factor ff, and efficiency η) for the <b>AS5</b> dye while sensitized with CDCA and showed highest DSSC efficiency of 8.01% in the <b>AS</b> dye series. This study revealed the potential of shorter SQ acceptor-anchoring group distance over the longer one and the importance of alkyl groups on the overall DSSC device performance for the unsymmetrical squaraine dyes.
chemistry, multidisciplinary
What problem does this paper attempt to address?
The paper primarily explores the impact of asymmetric quinacridone dyes with different structures on the performance of dye-sensitized solar cells (DSSCs). Specifically, the study synthesizes a series of visible-light-active asymmetric quinacridone dyes by altering the positions of indoline (In) and aniline (An) donor units and the alkyl groups attached to these units, and evaluates how these changes affect the performance of dye-sensitized solar cells. The main findings of the paper include: 1. **Impact of Donor Unit Position**: By changing the position of the donor units relative to the anchoring group (carboxylic acid), dyes with different structures (such as In-SQ-An-CO2H and An-SQ-In-CO2H) were prepared. The results indicate that a shorter distance between the acceptor and the anchoring group (such as AS2 and AS5) helps improve photovoltaic performance, while a longer distance leads to a decline in performance. 2. **Role of Alkyl Groups**: Functionalizing linear or branched alkyl groups on the indoline or aniline units can control the aggregation of dyes on the titanium dioxide (TiO2) surface. Experimental results show that this aggregation effect has a significant impact on the overall device performance. 3. **Photovoltaic Performance**: Based on different structural designs, dyes AS1, AS2, AS3, and AS4 achieved device efficiencies of 5.49%, 6.34%, 6.16%, and 5.57%, respectively; particularly, the AS5 dye exhibited the highest device efficiency of 8.01% after the addition of chenodeoxycholic acid (CDCA), thanks to its shorter acceptor-anchoring group distance and specific alkyl group configuration. In summary, this study aims to explore the optimization of dye-sensitized solar cell performance through the fine-tuning of dye molecular structures, particularly the positions of donor units and the types of alkyl groups.