Abstract:Novel magnetic sodium alginate-based biopolymer Fe3O4@SA-Fe was successfully prepared by the cross-linking reaction of sodium alginate (SA) and Fe(III) ions and adding magnetic ferric oxide (Fe3O4), and characterized by Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), UV-visible diffuse reflectance spectroscopy (UV-Vis DRS), Fourier Transform-Infrared (FTIR), X-ray Photoelectron Spectroscopy (XPS) and Vibrating Sample Magnetometer (VSM), respectively. The effects of preparation and adsorption conditions on the adsorbent were investigated by adsorbing Congo red (CR) and Direct red 23 (DR 23) dyes. The results showed that the synthesized Fe3O4@SA-Fe polymer gel beads exhibited super-high adsorption property and good stability when the mass concentrations of SA, Fe(III) ions and Fe3O4 are 16, 12.5 and 7 g/L at room temperature respectively. The adsorption rates of two dyes by Fe3O4@SA-Fe were very fast at 298 K, and the time required to reach the equilibrium was very short, which was 30 min for CR and 60 min for DR 23. Moreover, the dye removal efficiencies were over 99.4% and 95.2% in a wide pH range of 2.0 ~ 9.0 for CR and 2.0 ~ 10.0 for DR 23, respectively. The adsorption process could be accurately described by the pseudo-second-order rate model, which were mostly controlled by intra-particle diffusion. The fitting results of isothermic data by Langmuir, Freundlich and Dubinin-Radushkevich (D-R) models revealed that the equilibrium data completely obeyed the Langmuir model and the obtained maximum adsorption capacities of CR and DR 23 were 3333 and 1429 mg/g at 298 K, respectively. FTIR, UV-Vis and XPS analysis indicated that the electrostatic adsorption, hydrogen bonding and ligand exchange promoted the interaction between dye molecules and Fe3O4@SA-Fe. A green magnetic biosorbent Fe3O4@SA-Fe gel beads with simple preparation method and high-cost performance can be used for super-efficient purification of high-concentration dye effluent and quickly separated from the aqueous phase and recovered, which would have a good application prospect.

Easily recyclable magnetic polyacrylamide/sodium alginate/Fe3O4@ZIF-8 hydrogel beads for effective removal of Congo Red

Multi-functional Magnetic Hydrogels Based on Millettia Speciosa Champ Residue Cellulose and Chitosan: Highly Efficient and Reusable Adsorbent for Congo Red and Cu2+ Removal

Epichlorohydrin and triethylenetetramine functionalized electrosprayed Fe3O4/Chitosan magnetic microspheres for removal and separation of Congo red

Preparation of Novel Magnetic Sodium Alginate-Ferric(III) Gel Beads and Their Super-Efficient Removal of Direct Dyes from Water

Fabrication of an Fe-Doped ZIF-67 Derived Magnetic Fe/Co/C Composite for Effective Removal of Congo Red

Tetraethylenepentamine modified magnetic cellulose nanocrystal composites for removal of Congo red with high adsorption capacity

Enhanced adsorption of dye on magnetic Fe3O4 via HCl-assisted sonication pretreatment

An Innovative and Efficient Strategy for Removing Congo Red Using Magnetic Hollow Zn/Co Zeolitic Imidazolate Framework Composite

Magnetically separable Co0.6Fe2.4O4/MIL-101-NH2 adsorbent for Congo red efficient removal

Magnetic Poly(glycidyl methacrylate) Microspheres with Grafted Polypyrrole Chains for the High-Capacity Adsorption of Congo Red Dye from Aqueous Solutions

Fabrication of ionic liquids-based magnetite-cellulose-sepiolite nanocomposite for the removal of Congo red

Magnetically Recyclable Fe3o4/Bi2s3 Microspheres for Effective Removal of Congo Red Dye by Simultaneous Adsorption and Photocatalytic Regeneration

ZIF-8 modified polyvinyl alcohol/chitosan composite aerogel for efficient removal of Congo red

Facile synthesis of high-efficiency magnetic graphitic carbon nitride adsorbents for the selective removal of hazardous anionic dyes in wastewater

In Situ Synthesis of Magnetic Poly(DMAEAB-co-NIPAm)@Fe3O4 Composite Hydrogel for Removal of Dye from Water

Amino-modified γ-Fe2O3/sepiolite composite with rod-like morphology for magnetic separation removal of Congo red dye from aqueous solution

Sustainable adsorptive removal of high concentration organic contaminants from water using biodegradable Gum-Acacia integrated magnetite nanoparticles hydrogel adsorbent

Novel cationic polymer modified magnetic chitosan beads for efficient adsorption of heavy metals and dyes over a wide pH range

Highly Porous Poly(o-Phenylenediamine) Loaded Magnetic Carboxymethyl Cellulose Hybrid Beads for Removal of Two Model Textile Dyes

Sulfonic Acid-Modified Polyacrylamide Magnetic Composite with Wide Ph Applicability for Efficient Removal of Cationic Dyes

Fe3O4-doped Silk Fibroin-Polyacrylamide Hydrogel for Selective and Highly Efficient Absorption of Cationic Dyes Pollution in Water.