Abstract:Background: The insatiable need for low-power and high-performance integrated circuit (IC) results in the development of alternative options for metal oxide semiconductor field effect transistor (MOSFET) in the ultra-nanoscale regime. The practical challenge of the device scaling limits the use of MOSFET for future technology nodes. ICs are equipped with billions of transistors whose size must be scaled while increasing performance. As the size of the transistor shrinks for the new technology node, the control of the gate over the channel also reduces, leading to sub-threshold leakage. The non-planar technology is the potential methodology to design the ICs for the future technology nodes. The fin-shaped field effect transistor (FinFET) is the most valuable non-planar technology. High sub-threshold slope, better short channel effect (SCE) control, high current drive strength, low dopant-prompted variations, and decreased power dissipation are the prominent features of FinFET technology. Objective: FinFET is an advanced version of MOSFET in terms of geometrical structure. Therefore, in this review paper, the different geometrical structures, working operations, design challenges, future aspects, and the different configurations of FinFETs are presented. The performance of the different configurations of a 1-bit full adder is evaluated and compared. Methods: An overview of FinFET evolution from the planar MOSFET, along with its architecture supported by the requisite equations, is presented in the paper. Besides this, it also gives an insight into the circuit simulation using the FinFETs for the process voltage temperature (PVT) variations, width quantization, design challenges, and the future of FinFETs. A comparative study of FinFET-based 1-bit full adder using various techniques is done to compute and compare the leakage power, delay, and power delay product (PDP). Results: The full adders using FinFETs show less leakage power and PDP. The AND-OR logicbased hybrid full adder using FinFETs shows the least energy consumption per switching. Fin- FET-based gate diffusion input adder shows a 74 % reduction in dynamic power compared to the full adder using MOSFET technology. The low power FinFET-based full adder shows a 54.16 % reduction in leakage power compared to the MOSFET-based full adder. The results signify the effect of multi-gates in curbing the leakage power dissipation. Conclusion: MOSFET faces the practical challenge of device scaling and SCEs at lower technology nodes. It initiates the multi-gate technology for future system generation. FinFET has the capability to design low-power and high-performance circuits in an ultra-nanoscale regime. The geometrical structure of FinFET plays a key role to improve the performance metrics in an ultrananoscale regime.

Squaring Circuit Using 14nmFinFET Technology with Vedic Mathematics Approach

Reversible Squaring Circuit For Low Power Digital Signal Processing

Resource Optimized Quantum Squaring Circuit

Design of area-speed efficient Anurupyena Vedic multiplier for deep learning applications

Design and Simulation of FinFET based digital circuits for low power applications

Design of a 64-bit SQRT-CSLA with Reduced Area and High-Speed Applications in Low Power VLSI Circuits

A novel design of coplanar 8-bit ripple carry adder using field-coupled quantum-dot cellular automata nanotechnology

Review of the Nanoscale FinFET Device for the Applications in Nano-regime

High Speed Reconfigurable FFT Design by Vedic Mathematics

An Efficient Hardware Implementation for Complex Square Root Calculation Using a PWL Method

A low power high bandwidth four quadrant analog multiplier in 32 nm CNFET technology

Design of efficient binary multiplier architecture using hybrid compressor with FPGA implementation

A Configurable IP Core for Calculating the Integer Square Root for Serial and Parallel Implementations in FPGA

Low-Power Unsigned Divider and Square Root Circuit Designs Using Adaptive Approximation

Unleashing the Power of T1-cells in SFQ Arithmetic Circuits

FinFET-based Low-power Improved PDP 4:2 Approximate Compressor Design

A modular technique of Booth encoding and Vedic multiplier for low-area and high-speed applications

Low power-area designs of 1bit full adder in cadence virtuoso platform

KiD: A Hardware Design Framework Targeting Unified NTT Multiplication for CRYSTALS-Kyber and CRYSTALS-Dilithium on FPGA

Efficient quantum-dot adder optimisation and analysis for future circuits

A Design and Implementation of Radix-4 Based Fast Multiplier on FPGA