Abstract:The traditional handmade catalytic combustion gas sensor has some problems such as a pairing difficulty, poor consistency, high power consumption, and not being interchangeable. To address these issues, integrated double catalytic combustion of alcohol gas sensor was designed and manufactured using silicon micro-electro-mechanical systems (MEMS) technology. The temperature field of the sensor is analyzed using the ANSYS finite element analysis method. In this work, the silicon oxide-PECVD-oxidation technique is used to manufacture a SiO2-Si3N2-SiO2 microstructure carrier with a sandwich structure, while wet etching silicon is used to form a beam structure to reduce the heat consumption. Thin-film technology is adopted to manufacture the platinum-film sensitive resistance. Nano Al2O3-ZrO-ThO is coated to format the sensor carrier, and the sensitive unit is dipped in a Pt-Pd catalyst solution to form the catalytic sensitive bridge arm. Meanwhile the uncoated catalyst carrier is considered as the reference unit, realizing an integrated chip based on a micro double bridge and forming sensors. The lines of the Pt thin-film resistance have been observed with an electronic microscope. The compensation of the sensitive material carriers and compensation materials have been analyzed using an energy spectrum. The results show that the alcohol sensor can detect a volume fraction between 0 and 4,500 × 10−6 and has good linear output characteristic. The temperature ranges from −20 to +40 °C. The humidity ranges from 30% to 85% RH. The zero output of the sensor is less than ±2.0% FS. The power consumption is ≤0.2 W, and both the response and recovery time are approximately 20 s.

Synthesis of a Df-porous Si layer of mesostructure to develop the mechanisms of CO sensors

Room temperature CO2 gas sensors of AuNPs/mesoPSi hybrid structures

Study the Characteristic of Planer and Sandwich PSi Gas Sensor (Comparative Study)

Development of MEMS gas sensors equipped with metal organic frameworks

Development of microstructure CO sensor based on hierarchically porous ZnO nanosheet thin films

Nanoscale morphology, optical dynamics and gas sensor of porous silicon

Tailoring the surface morphology of nanostructured cobalt oxide for high-sensitivity CO sensor

Concurrent Sensing of CO2 and H2O from Air Using Ultramicroporous Fluorinated Metal-Organic Frameworks: Effect of Transduction Mechanism on the Sensing Performance

Silicon Waveguide Sensors for Carbon Dioxide Gas Sensing in the Mid-Infrared Region

Planar Polymer Optical Waveguide with Metal‐Organic Framework Coating for Carbon Dioxide Sensing

Enhanced sensing performance of zinc oxide porous silicon heterojunction-based gas sensors

A Monolithic Nano-Scale Sensor Architecture with Tuneable Gas Diffusion for Molecular Fingerprinting

Design and Experimentation with Sandwich Microstructure for Catalytic Combustion-Type Gas Sensors

Molecular Sieve Based on a PMMA/ZIF-8 Bilayer for a CO-Tolerable H2 Sensor with Superior Sensing Performance

Cu2O–CuO Composite Microframes with Well-Designed Micro/nano Structures Fabricated Via Controllable Etching of Cu2O Microcubes for CO Gas Sensors

Integration of a Metal-Organic Framework Film with a Tubular Whispering-Gallery-Mode Microcavity for Effective CO<sub>2</sub> Sensing

A new class of porous silicon electrochemical transducers built from pyrolyzed polyfurfuryl alcohol

High-Power DFB Diode Laser-Based CO-QEPAS Sensor: Optimization and Performance.

Au Nanoparticles Decorated Mesoporous SiO2 -WO3 Hybrid Materials with Improved Pore Connectivity for Ultratrace Ethanol Detection at Low Operating Temperature.

Design and fabrication of poly-Si/SiO2 Fabry–Perot filter for nondispersive IR CO2 sensors

A Dual-Laser Sensor Based on Off-Axis Integrated Cavity Output Spectroscopy and Time-Division Multiplexing Method