Abstract:Microporous aeration has been widely used to restore eutrophic water bodies. The gas–liquid mass transfer in the aeration process has a significant influence on the improvement of water quality. Therefore, the influence mechanism of oxygen mass transfer is worth studying. However, the influence of bubble movement characteristics on oxygen mass transfer has not been systematically studied. Thus, the present study explored the influence mechanism of microporous apertures on oxygen mass transfer in terms of bubble motion characteristics by investigating the oxygen mass transfer process and the feature of bubble movement under different aeration microporous aperture sizes. The results showed that the mass transfer efficiency was reduced as the micropore aperture increased from 200 to 400 μm. and the reduction rate was 7.17% when the aperture increased from 200 to 300 μm, which was lower than that from 300 to 400 μm (19.17%). Furthermore, the micropore aperture showed a positive correlation with the time-averaged velocity field. With the increase in aperture, the bubble velocity gradient (from the center to both sides of the edge) increased from about 0.2 to 0.4 m/s, which increased the oxygen mass transfer effect. The increase of micropore aperture caused the increase of average Sauter bubble diameter and the decrease of specific surface area of bubbles. In addition, the negative effects of the reduction of specific surface area and the shortening of bubble residence time on oxygen mass transfer efficiency were greater than the positive effects of the increase of turbulent kinetic energy. When the aperture changes from 300 to 400 μm, the shortening of bubble residence time should have played a major role. This study provides some theoretical parameters for investigating the mechanism of oxygen mass transfer in microporous aeration.This article has not yet been cited by other publications.
What problem does this paper attempt to address?
The problem this paper attempts to address is: studying the mechanism of the impact of different micropore diameters on oxygen mass transfer efficiency during microporous aeration. Specifically, the authors explore the effect of bubble motion flow fields on the oxygen mass transfer process by analyzing the motion characteristics of bubbles under different micropore diameters.
### Background and Problem
- **Eutrophication Issue**: Water eutrophication is a widespread environmental problem. Common remediation measures include dredging, biological treatment, chemical coagulation, and artificial aeration.
- **Advantages of Artificial Aeration**: Artificial aeration can increase the dissolved oxygen (DO) concentration, aerobic microbial activity, hydrodynamic conditions, and self-purification capacity of water bodies by introducing oxygen into hypoxic water. Due to its simplicity and low cost, artificial aeration is widely used.
- **Advantages of Microporous Aeration**: Microporous aeration has a high oxygen utilization rate because the bubbles are small, leading to a longer residence time in the water and a larger gas-liquid contact area.
- **Challenges in Oxygen Mass Transfer Efficiency**: Despite the advantages of microporous aeration, the oxygen utilization rate is low in shallow water environments, limiting its application range. Therefore, improving the oxygen mass transfer efficiency of microporous aeration is an urgent problem to be solved.
### Research Objectives
- **Study Bubble Motion Characteristics**: Investigate the changes in bubble motion characteristics under different micropore diameters and their impact on oxygen mass transfer efficiency.
- **Reveal the Impact Mechanism**: Through experiments and numerical simulations, reveal the specific impact mechanism of micropore diameter on bubble motion flow fields and oxygen mass transfer efficiency.
### Main Findings
- **Relationship Between Pore Diameter and Mass Transfer Efficiency**: As the micropore diameter increases from 200 μm to 400 μm, the oxygen mass transfer efficiency gradually decreases. When the pore diameter increases from 200 μm to 300 μm, the mass transfer efficiency decreases by 7.17%, and when it increases from 300 μm to 400 μm, the decrease rate is 19.17%.
- **Bubble Motion Characteristics**: An increase in pore diameter leads to an increase in the average bubble diameter and a decrease in the specific surface area. The bubble velocity gradient increases from the center to the edge, from about 0.2 m/s to 0.4 m/s, promoting the formation of hydraulic circulation, which is beneficial for oxygen mass transfer. However, the increase in bubble velocity shortens the residence time of bubbles in the water, which may inhibit oxygen mass transfer efficiency.
- **Comprehensive Impact**: The negative impact of the reduction in bubble specific surface area and residence time on oxygen mass transfer efficiency outweighs the positive impact of increased turbulent kinetic energy. When the pore diameter increases from 300 μm to 400 μm, the shortening of bubble residence time becomes the main factor, indicating that after the bubble velocity reaches a certain level, the reduction in residence time is the most important factor weakening oxygen mass transfer efficiency.
### Conclusion
- **Impact of Pore Diameter on Mass Transfer Efficiency**: The increase in micropore diameter leads to a decrease in oxygen mass transfer efficiency, mainly due to the reduction in bubble specific surface area and residence time.
- **Role of Bubble Motion Flow Field**: Changes in the bubble motion flow field have a significant impact on the oxygen mass transfer process. The increase in bubble velocity gradient promotes the formation of hydraulic circulation but also shortens the residence time of bubbles.
### Methods
- **Experimental Materials and Equipment**: A four-probe dissolved oxygen meter was used to monitor dissolved oxygen concentration, and a particle image velocimetry (PIV) system was used to monitor the bubble motion flow field.
- **Experimental Steps**: Aeration experiments were conducted under different micropore diameters, recording the changes in bubble motion characteristics and dissolved oxygen concentration. The oxygen mass transfer coefficient, oxygenation capacity, and oxygen utilization rate were calculated using the double-film theory.
This study provides a theoretical basis for optimizing the oxygen mass transfer efficiency of microporous aeration systems.