Abstract:The effect of the soft and hard polyurethane (PU) segments caused by the hydrogen link in phase-separation kinetics was studied to investigate the morphological annealing of PU and thermoplastic polyurethane (TPU). The significance of the segmented PUs is to achieve enough stability for further applications in biomedical and environmental fields. In addition, other research focuses on widening the plastic features and adjusting the PU-polyimide ratio to create elastomer of the poly(urethane-imide). Regarding TPU- and PU-nanocomposite, numerous studies investigated the incorporation of inorganic nanofillers such as carbon or clay to incorporating TPU-nanocomposite in several applications. Additionally, the complete exfoliation was observed up to 5% and 3% of TPU-clay modified with 12 amino lauric acid and benzidine, respectively. PU-nanocomposite of 5 wt.% Cloisite®30B showed an increase in modulus and tensile strength by 110% and 160%, respectively. However, the nanocomposite PU-0.5 wt.% Carbone Nanotubes (CNTs) show an increase in the tensile modulus by 30% to 90% for blown and flat films, respectively. Coating PU influences stress-strain behavior because of the interaction between the soft segment and physical crosslinkers. The thermophysical properties of the TPU matrix have shown two glass transition temperatures (Tg's) corresponding to the soft and the hard segment. Adding a small amount of tethered clay shifts Tg for both segments by 44 °C and 13 °C, respectively, while adding clay from 1 to 5 wt.% results in increasing the thermal stability of TPU composite from 12 to 34 °C, respectively. The differential scanning calorimetry (DSC) was used to investigate the phase structure of PU dispersion, showing an increase in thermal stability, solubility, and flexibility. Regarding the electrical properties, the maximum piezoresistivity (10 S/m) of 7.4 wt.% MWCNT was enhanced by 92.92%. The chemical structure of the PU-CNT composite has shown a degree of agglomeration under disruption of the sp2 carbon structure. However, with extended graphene loading to 5.7 wt.%, piezoresistivity could hit 10-1 S/m, less than 100 times that of PU. In addition to electrical properties, the acoustic behavior of MWCNT (0.35 wt.%)/SiO2 (0.2 wt.%)/PU has shown sound absorption of 80 dB compared to the PU foam sample. Other nanofillers, such as SiO2, TiO2, ZnO, Al2O3, were studied showing an improvement in the thermal stability of the polymer and enhancing scratch and abrasion resistance.

Radiopaque Polyurethanes Containing Barium Sulfate: A Survey on Thermal, Rheological, Physical, and Structural Properties

PREPARATION AND PROPERTIES OF A NEW RADIOPAQUE POLYURETHANES

Biodegradable Radiopaque Iodinated Poly(ester Urethane)s Containing Poly(ε‐caprolactone) Blocks: Synthesis, Characterization, and Biocompatibility

Radiopaque Polyurethanes with Flexible Iodine-Containing Chain Extender

Radiopaque iodinated polyurethane for embolic agents

Biomedical Segmented Polyurethanes Based on Polyethylene Glycol, Poly(ε-Caprolactone-co-d,l-lactide), and Diurethane Diisocyanates with Uniform Hard Segment: Synthesis and Properties

Enzymatic degradation and radiopaque attenuation of iodinated poly(ester-urethane)s with inherent radiopacity

STUDY OF BODY TEMPERATURE CURABLE AND RADIOPAQUE POLYURETHANE FOR PROSTHETIC DISC NUCLEUS

Co-Optimization of Mechanical Properties and Radiopacity Through Radiopaque Filler Incorporation for Medical Tubing Applications

The influence of electron beam irradiation on the chemical and structural properties of medical grade Polyurethane

Performance Study of Biodegradable Polyurethanes from Different Biodicarboxylic Acids and Their Potential Applications

Synthesis And Characterization Of Radiopaque Poly(Ether Urethane) With Iodine-Containing Diol As Chain Extender

Polyurethanes and Their Biomedical Applications

Structuring and viscoelastic properties of polyurethanes, doped with aerosil nanoparticles and activated by xanthene dyes

Radiation Crosslinking of Polyurethanes: Characterization by FTIR, TGA, SEM, XRD, and Raman Spectroscopy

Synthesis and Characterization of Novel Radiopaque Polycarbonate

The relationship between chemical microstructure, crystallinity, mechanical properties, and CO2/N2 gases permselectivity of thermoplastic polyurethane membranes

Investigating Physio-Thermo-Mechanical Properties of Polyurethane and Thermoplastics Nanocomposite in Various Applications

Comparative Study on Selective Laser Sintering of Aromatic and Aliphatic Thermoplastic Polyurethanes: Processability, Microstructure, and Mechanical Properties

Synthesis, Characterization and Biocompatibility of Elastomeric Poly(L-co-D,L-lactic acid-co-Caprolactone)urethane for Biomedical Applications

Design and Synthesis of Novel Iodinated Polycarbonates with Inherent X-Ray Opacity