Abstract:The role of the multiaxial state of stress on creep deformation and rupture behavior of 304HCu austenitic stainless steel was assessed by performing creep rupture tests on both smooth and notched specimens of the steel. The multiaxial state of stress was introduced by incorporating circumferential U-notches of different root radii ranging from 0.25 to 5.00 mm on the smooth specimens of the steel. Creep tests were carried out at 973 K over the stress range of 140 to 220 MPa. In the presence of notch, the creep rupture strength of the steel was found to increase with the associated decrease in rupture ductility. Over the investigated stress range and notch sharpness, the strengthening was found to increase drastically with notch sharpness and tended toward saturation. The fractographic studies revealed the mixed mode of failure consisting of transgranular dimples and intergranular creep cavitation for shallow notches, whereas the failure was predominantly intergranular for relatively sharper notches. Detailed finite element analysis of stress distribution across the notch throat plane on creep exposure was carried out to assess the creep failure of the material in the presence of notch. The reduction in von-Mises stress across the notch throat plane, which was greater for sharper notches, increased the creep rupture strength of the material. The variation in fracture behavior of the material in the presence of notch was elucidated based on the von-Mises, maximum principal, and hydrostatic stresses. Electron backscatter diffraction analysis of creep strain distribution across the notch revealed localized creep straining at the notch root for sharper notches. A master curve for predicting creep rupture life under the multiaxial state of stress was generated considering the representative stress having contributions from both the von-Mises and principal stress components of the stress field in the notch throat plane. Rupture ductility was also predicted based on the multiaxial state of stress.

Microstructural characterisation of grain size effect on creep properties of 304HCu SS

An Investigation of the Effect of High-Temperature Cyclic Straining and Creep Loading on Tensile Mechanical Properties of GH4145/SQ Alloy

Constructing Two-Scale Network Microstructure with Nano-Ti5si3 for Superhigh Creep Resistance

Assessment of Creep Deformation, Damage, and Rupture Life of 304HCu Austenitic Stainless Steel Under Multiaxial State of Stress

On the influence of grain morphology on creep deformation and damage mechanisms in directionally solidified and oxide dispersion strengthened superalloys

Impacts of different designed microstructures on creep performance of a Ni-based wrought superalloy

Microstructural characterisation and microanalysis of creep resistant steels

Comparative Study on the Effect of Temperature, Pressure and Grain Size on the Creep Behavior of Monolithic Titanium Aluminide Alloy through Molecular Dynamics Simulation

Investigation on Creep Deformation and Age Strengthening Behavior of 304 Stainless Steel under High Stress Levels

Beneficial role of short-term aging on creep performance of cold-worked Ti-added 14Cr–15Ni stainless steel

Investigation on the effect of temperature, pressure and grain size on the creep behavior of nickel-chromium binary alloy through molecular dynamics simulation

Molecular dynamics study on the grain size, temperature, and stress dependence of creep behavior in nanocrystalline nickel

Effect of initial microstructures on grain refinement in a stainless steel by large strain deformation

Study of the Creep Behavior of Nickel-Based Single Crystal Superalloy Micro Specimens with Dimensional Effects

Microstructure Impacts on Mechanical Properties in a High Temperature Austenitic Stainless Steel

Effects of Grain Size on Mechanical Properties and Work‐Hardening Behavior of AISI 304 Austenitic Stainless Steel

Effects of Grain Size Distribution on the Creep Damage Evolution of Polycrystalline Materials

Effect of Hydrogen and Strain Rate on Nanoindentation Creep of Austenitic Stainless Steel

Creep Resistance of S304H Austenitic Steel Processed by High-Pressure Sliding

Microstructural changes in alloy 625 during high temperature creep

Microstructure Evolution and Dislocation Mechanism of a Third-Generation Single-Crystal Ni-Based Superalloy during Creep at 1170 °C