Abstract:Superhydrophobic surfaces are important in many applications owing to their special properties such as self-cleaning, anti-icing, antibacterial, and anti-fogging. In this paper, a micro/nano hierarchical superhydrophobic surface with a low roll-off angle was created on 304 stainless steel. The water contact angle was measured to be 152° with a roll-off angle of 7.3°. Firstly, microscale bumps were created by femtosecond laser irradiation. Secondly, zinc oxide (ZnO) nanowires were fabricated on the laser-induced bumps using a hydrothermal synthesis method. Results show that after laser treatment and ZnO nanostructuring, the stainless steel surface became superhydrophobic. However, the roll-off angle of this hierarchical structure surface was larger than 90°. To reduce the surface activity, trimethoxy silane hydrophobic coating was applied. A 7.3° roll-off angle was achieved on the coated surface. The underlying mechanism was discussed. The hydrophobic ZnO structured surface can help prevent bacterial contamination from water, which is important for implants. Thus, for biomedical applications, the antibacterial property of this hierarchical surface was examined. It was found that the antibacterial property of sample surfaces with ZnO nanowires were significantly increased. The optical density (OD) of Escherichia coli (E. coli) attached to the original surface was 0.93. For the micro-structured surface (with bumps), the OD was 0.9, and for the hierarchical surface (with bump & nanowires), it was 0.54. For nanostructured ZnO nanowire surface, the OD was only 0.09. It demonstrates good antibacterial properties of ZnO nanowires.

Stable Superhydrophobic and Antimicrobial ZnO/Polytetrafluoroethylene Films via Radio Frequency (RF) Magnetron Sputtering

A Facile Method to Fabricate Superhydrophobic ZnO Nanostructure with Petal Effect

Preparation of nano-ZnO@polytetrafluoroethylene superhydrophobic coating and its anti-biological adhesion properties

A robust, room-temperature curable and molecular-level superhydrophobic coating with excellent antibacterial and antifouling properties

Omniphobic PTFE based Hollow Fiber Membrane with ZnO Nanoparticles Deposition via Universal Spray Technique

Antibacterial Hydrophilic ZnO Microstructure Film with Underwater Oleophobic and Self-Cleaning Antifouling Properties

Superhydrophobic Surfaces Via Controlling the Morphology of ZnO Micro/nano Complex Structure

Nature-Inspired Fluorine-Free Robust Superhydrophobic Fabrics

Cost-effective superhydrophobic ZnO films with adjustable wetting behaviors deposited via solution precursor plasma spray process

Superhydrophobic and Antibacterial Hierarchical Surface Fabricated by Femtosecond Laser

Facile Fabrication of Super-Hydrophobic Surfaces by Spray PTFE

Fabrication of stable and versatile superhydrophobic PTFE coating by simple electrodeposition on metal surface

Preparation of transparent and hydrophobic cerium oxide films with stable mechanical properties by magnetron sputtering

Fabrication and analysis of super-hydrophobic ZnO film for microfluidic devices

Wettability and Bactericidal Properties of Bioinspired ZnO Nanopillar Surfaces

Cold sintering process for fabrication of a superhydrophobic ZnO–polytetrafluoroethylene (PTFE) ceramic composite

Preparation and properties of polytetrafluoroethylene superhydrophobic surface

Hydrogen bubble-templated electrodeposition of modifier-free superhydrophobic Zn-Ni films

Preparation and Properties of Superhydrophobic ZnO Nanorod-based Nanocomposite on the Surface of Stainless Steel Mesh

Vacuum ultraviolet responded rapid reversible conversion of super-hydrophobicity and super-hydrophilicity of ZnO films

CuO Nanoparticles-Containing Highly Transparent and Superhydrophobic Coatings with Extremely Low Bacterial Adhesion and Excellent Bactericidal Property.