Abstract:Pumped thermal electricity storage that integrates with low-grade heat source (thermally integrated PTES, TI-PTES) have gained widespread attention due to the superior performance compared to traditional PTES systems. In this work, a TI-PTES system integrated with solar energy is constructed. R1233zd(E) is employed as the working fluid in the system. Select solar data from four typical days (Vernal Equinox, Summer Solstice, Autumn Equinox, Winter Solstice) throughout the year in Chuxiong City, Yunnan Province, which has abundant solar resources. Design conditions for the system are determined by a multi-objective optimization approach, and based on this, the off-design performance of both the charge and discharge processes are studied. The off-design models for the main components of the system are established. In the charge process, the weather conditions from 10:00 to 15:00 on a typical day are selected for a 6-hour charge period, and a parameter analysis of the system is conducted under different weather conditions. In the discharge process, the off-design performance of the system under different load levels is analyzed for two operating modes: constant pressure mode and variable pressure mode. The results indicate that in the charge process, the values of the compressor power under off-design conditions ( W comp,off ), the mass flow rates of the heat pump system ( m RHP ), and thermal energy storage system ( m ts ) of Winter Solstice are the highest from 11:00 to 15:00 compared to the other 3 days. In the discharge process, the power-to-power efficiency ( ηPTP ) and Levelized Cost of Storage (LCOS) of the Vernal Equinox and Autumn Equinox reach their maximum (74.47 %) and minimum (0.247 $·kWh −1 ) values at an 80 % load level under variable pressure mode. Under constant pressure mode, the power-to-power efficiency and LCOS of the Vernal Equinox and Autumn Equinox reach their maximum (74.34 %) and minimum (0.232 $·kWh −1 ) values at 70 % and 40 % load levels. Comparing the off-design performance between the variable pressure mode and constant pressure mode in the discharge process, the variable pressure operation mode is recommended for load levels between 78 % and 85 %, while the constant pressure operation mode is recommended for load levels between 40 % and 78 %, as well as between 85 % and 120 %. The obtained results can serve as a reference for the off-design performance analysis of TI-PTES.

Physical modeling and dynamic characteristics of pumped thermal energy storage system

Thermodynamic Analysis of Pumped Thermal Electricity Storage Integrated with Organic Rankine Cycle During Charging Process

Dynamic thermodynamic performance analysis of a novel pumped thermal electricity storage (N-PTES) system coupled with liquid piston

Dynamic performance for discharging process of pumped thermal electricity storage with reversible Brayton cycle

Technical and economic analysis of Brayton-cycle-based pumped thermal electricity storage systems with direct and indirect thermal energy storage

Configuration mapping of thermally integrated pumped thermal energy storage system

Thermo-economic Analysis of the Pumped Thermal Energy Storage with Thermal Integration in Different Application Scenarios

Thermodynamic Analysis of a Novel Pumped Thermal Energy Storage System Utilizing Ambient Thermal Energy and LNG Cold Energy

Combined cooling, heating, and power generation performance of pumped thermal electricity storage system based on Brayton cycle

Thermo-economic Assessment of Sub-Ambient Temperature Pumped-Thermal Electricity Storage Integrated with External Heat Sources

Part-Load Energy Performance Assessment of a Pumped Thermal Energy Storage System for an Energy Community

Dynamic characteristics and control strategy of pumped thermal electricity storage with reversible Brayton cycle

Thermo-economic analysis and comparative study of different thermally integrated pumped thermal electricity storage systems

Variable load modes and operation characteristics of closed Brayton cycle pumped thermal electricity storage system with liquid-phase storage

Thermodynamic evaluation of a novel Rankine-based pumped thermal energy storage concept targeting thermal coordination and large temperature span

Influence of capital cost input on optimized round-trip efficiency of pumped thermal electricity storage under finite time thermoeconomic optimization

Off-design performance evaluation of thermally integrated pumped thermal electricity storage systems with solar energy

Effects of charging and discharging capabilities on trade-offs between model accuracy and computational efficiency in pumped thermal electricity storage

Optimization of Thermal Performance of High Temperature Sensible Heat Thermal Energy Storage System for Direct Steam Generation: a Simulation Work

Semi-analytical model of a large-scale water pit heat storage for the long-term thermal applications

Analysis of low‐temperature pumped thermal energy storage systems based on a transcritical CO2 charging process