Abstract:The separation of Li+ from Mg2+ in salt-lake brines using nanofiltration (NF) has become the most popular solution to meet the rising demand for lithium, particularly driven by the extensive use of lithium-ion batteries. This study presents the fabrication of a uniquely designed polyamide (PA) thin-film nanocomposite (TFN) membranes with ultrahigh Li+/Mg2+ selectivity and enhanced water flux by covalently incorporating mixed ligands functionalized silica nanoparticles (F-SiO2NPs) into the selective PA layer and covalently bonding them to the membrane surface. In this strategy, bare silica nanoparticles (SiO2NPs) were functionalized with mixed superhydrophilic ligands, including primary amine and quaternary ammonium groups, resulting in a highly positive surface charge primarily from the quaternary ammonium groups and enabling covalent conjugation via amine groups. Among the F-SiO2NP-incorporated membranes, M500 containing 500 ppm of F-SiO2NPs exhibited the best performance. In a solution with 2000 ppm salt concentration (Li+/Mg2+ ratio of 1:20), the M500 membrane showed an improved Li+/Mg2+ selectivity of 7.41 compared to the nonmodified TFC membrane, which had a selectivity of 5.05. Further surface conjugation of the M500 sample with 1500 ppm of F-SiO2NPs resulted in the C1500 membrane, demonstrating the best performance among all of the surface-modified membranes. C1500 showed an outstanding Li+/Mg2+ selectivity of 37.95, with a Mg2+ rejection of 95.7% and a Li+ rejection of -63.2%, and a water flux of 56.0 L m-2 h-1 at 70 psi. Notably, a 7.5-fold improvement in Li+/Mg2+ selectivity over the TFC membrane was achieved without compromising the water flux. This is evident from the nearly identical water flux values of the TFC, M500, and C1500 membranes, which were 57.1, 54.8, and 56.0 L m-2 h-1, respectively. Considering key factors for large-scale applications, such as cost-effectiveness, environmental impact, the abundance of synthetic precursors, and the maturity of synthesis and tailoring technologies, SiO2NP-based modifications outperform all other reported approaches to date.

Surfactant-interlayer assisted interfacial polymerization for constructing Janus nanofiltration membranes: Enhanced Li + /Mg 2+ separation efficiency

Membranes with Negatively-Charged Nanochannels Fabricated from Aqueous Sulfonated Polysulfone Nanoparticles for Enhancing the Rejection of Divalent Anions

Enhancing Mg 2+ /Li + separation performance of nanofiltration membranes through polyelectrolyte modulation and surface modification

Positively-charged nanofiltration membranes constructed via gas/liquid interfacial polymerization for Mg2+/Li+ separation

An interlayer-based positive charge compensation strategy for the preparation of highly selective Mg 2+ /Li + separation nanofiltration membranes

Fabrication of positively charged nanofiltration membrane with uniform charge distribution by reversed interfacial polymerization for Mg2+/Li+ separation

Extreme Li-Mg selectivity via precise ion size differentiation of polyamide membrane

High performance Li+/Mg2+ separation membrane by grafted short chain amino-rich monomers

Improving Mg 2+ /Li + separation performance of polyamide nanofiltration membrane by swelling-embedding-shrinking strategy

Rethinking Nanofiltration Membrane Design for Breaking the Trade-off in Li/Mg Separation: A Comprehensive Analysis Based on the Separation Factor-Lithium Flux ( S-J Li ) Framework

Enhancing Ion Separation Efficiency: Janus Charged Nanofiltration Membrane Fabricated via Polyethyleneimine-Manipulated Interfacial Polymerization

Polyamide nanofiltration membranes with rigid–flexible microstructures for high-efficiency Mg 2+ /Li + separation

Advanced Mg 2+ /Li + separation nanofiltration membranes fabricated with Girard's reagent T based on functional end-capping strategy

Efficient Lithium Recovery from Water Using Polyamide Thin-Film Nanocomposite (TFN) Membrane Modified with Positively Charged Silica Nanoparticles

Dual-skin layer nanofiltration membranes for highly selective Li+/Mg2+ separation

Facile design of the nanofiltration membrane with Cu 2+ -incorporated aminated polyethylene substrate for highly selective magnesium/lithium separation

Electronanofiltration Membranes with a Bilayer Charged Structure Enable High Li+/Mg2+ Selectivity

A nanofiltration membrane with positively and negatively charged groups by grafted p-aminosalicylic acid-Fe(III) chelation for Li + /Mg 2+ efficient separation

Unprecedented Mg2+/Li+ separation using layer-by-layer based nanofiltration hollow fiber membranes

Porous Organic Polymer Interlayers Modulated Nanofiltration Membranes for Ultra-Permselective Li+ /mg2+ Separation

Constructing a selective blocked-nanolayer on nanofiltration membrane via surface-charge inversion for promoting Li+ permselectivity over Mg2+