Abstract:Fischer-Tropsch synthesis (FTS) is a classical topic of great significance because of the approach of post-petroleum times. Recently we found that, taking the advantage of the anchoring effect and intrinsic basicity of nitrogen-doped carbon nanotubes (NCNTs), iron nanoparticles could be conveniently immobilized on the NCNTs without surface pre-modification. The so-constructed Fe/NCNTs catalyst presents the superb catalytic performance in FTS with high selectivity as well as high catalytic activity and stability. In this study, three Fe/NCNTs catalysts were prepared by incipient wetness impregnation method, colloidal method and deposition-precipitation method, denoted as Fe/NCNTs-IWP, Fe/NCNTs-C, and Fe/NCNTs-DP, respectively. The influence of preparation methods on the particle size distribution and morphology, reduction and carbonization of the active species, as well as the FTS catalytic performance were systematically examined. The results indicate that the incipient impregnation method could achieve high dispersion, smaller particles and narrower size distribution [(8 +/- 4) nm], leading to the easier reduction and carbonization of the iron nanoparticles compared with those prepared by the other two methods. The FTS catalytic performance of the Fe/NCNTs-IWP catalyst is much better than those of the Fe/NCNTs-C and the Fe/NCNTs-DP catalysts in terms of the high lower olefins selectivity, high catalytic activity and stability. Colloid method got the different morphologies of iron particles with the average size of (13 +/- 7) nm. The active iron species was susceptible to oxidation during the reaction, which cause poor catalytic activity and stability. The deposition-precipitation method got the largest particles of (19 +/- 11) nm which were difficult to be reduced and carbonized, leading to the sharp decline of the catalytic activity and stability after 15 h reaction. The size-dependence of the catalytic performance for the Fe/NCNTs catalysts in this study are generally in consistent with those in literatures for the iron catalysts supported on carbon nanotubes. These results should be suggestive for exploring the advanced FTS catalysts with the abundant N-doped carbon nanostructures.

Size and promoter effects on iron nanoparticles confined in carbon nanotubes and their catalytic performance in light olefin synthesis from syngas

Insights into the Electronic Effects of the Zn Promoter on Co2C Nanoprisms for Fischer-Trospch to Olefin Reaction

Iron Catalyst Encapsulated in Carbon Nanotubes for CO Hydrogenation to Light Olefins

Promoter Effect on Carbon Nanosphere-Encapsulated Fe-Co Catalysts for Converting CO2 to Light Olefins

Promotional Effects of Multiwalled Carbon Nanotubes on Iron Catalysts for Fischer-Tropsch to Olefins

Study of the Fischer-Tropsch synthesis on nano-precipitated iron-based catalysts with different particle sizes

Size Effects of ZnO Nanoparticles in Bifunctional Catalysts for Selective Syngas Conversion

Size effect of the carbon-supported bimetallic Fe-Co nanoparticles on the catalytic activity in the Fischer-Tropsch synthesis

Promotion Effects of Nitrogen Doping into Carbon Nanotubes on Supported Iron Fischer–Tropsch Catalysts for Lower Olefins

Nanocrystalline Iron–boron Catalysts for Low-Temperature CO Hydrogenation: Selective Liquid Fuel Production and Structure–activity Correlation

High-temperature Fischer–Tropsch Synthesis over the Li-promoted FeMnMgOx Catalysts

Iron oxide nanoparticles supported on pyrolytic graphene oxide as model catalysts for Fischer Tropsch synthesis

Iron-based catalyst on PANI-derived N-containing carbon carriers: effect of carrier carbonization temperature on direct syngas conversion to light olefins

Influence of Preparation Methods on Catalytic Performance of Fe/Ncnts Fischer-Tropsch Catalysts

Novel iron-based composites as catalysts for the fischer-tropsch synthesis of lower olefins

Study of Iron-Based Catalysts Performance in Fischer–Tropsch Synthesis: Temperature and Promoter Effect

Fabrication of K-promoted Iron/carbon Nanotubes Composite Catalysts for the Fischer–Tropsch Synthesis of Lower Olefins

Fe Nanoparticle Size Control of the Fe-MOF-Derived Catalyst Using a Solvothermal Method: Effect on FTS Activity and Olefin Production

Effect of Li Promoter on FeMn/CNTs for Light Olefins from Syngas

Fischer–Tropsch synthesis to olefins boosted by MFI zeolite nanosheets

Iron-based Fischer–Tropsch Synthesis of Lower Olefins: the Nature of Χ-Fe5c2 Catalyst and Why and How to Introduce Promoters