Abstract:The combination of plastic scintillators with Silicon Photo-Multipliers (SiPMs) is widely used for detecting radiation in high-energy astrophysics, particle physics, neutrino physics, or medical physics. An example of application for this kind of detectors are Compton polarimeters such as POLAR-2 or LEAP, for which a low-Z material is needed for the Compton effect to be dominant down to as low energy as possible. Such detectors aim to measure low energy Compton depositions which produce small amounts of optical light, and for which optimizing the instrumental optical properties consequently imperative. The light collection efficiency of such a device was studied with a focus on the POLAR-2 GRB polarimeter, in which the conversion of incoming $\gamma$-rays into readable signal goes through the production and collection of optical light, which was to be optimized both through measurements and simulations. The optical elements of the POLAR-2 polarimeter prototype module were optically characterized and an optical simulation based on Geant4 was developed to fully model its optical performances. The results from simulations were used to optimize the design and finally to verify its performance. The study resulted in a detector capable of measuring energy depositions of several keV. In addition an important finding of this work is the impact of the plastic scintillator surface roughness on the light collection. It was found that a plastic scintillator with a higher scintillation efficiency but made of a softer material, hence with a rougher surface, was not necessarily the best option to optimize the light collection. Furthermore, in order to optimize the optical crosstalk between different channels, a production technique for very thin ($\sim$150$~\mu$m) and reusable silicone-based optical coupling pads, which can be applied for other experiments, was developed.

Wavelength-shifter coated polystyrene as an easy-to-build and low-cost plastic scintillator detector

Extruded Plastic Scintillation Detectors

Organic room-temperature phosphorescent polymers for efficient X-ray scintillation and imaging

Initiator-free preparation and properties of polystyrene-based plastic scintillators

Optimizing the light output of a plastic scintillator and SiPM based detector through optical characterization and simulation: A case study for POLAR-2

Performance of styrene polymerized plastic scintillator with micropixel avalanche photodiode

Performance of a plastic scintillator developed using styrene monomer polymerization

Light simulation in plastic scintillator strip with embedded wavelength shifting fiber

High-loaded and Transparent LaxCe1-xF3 — Polystyrene Nanocomposite Scintillators for Radiation Detection

The effect of PPO concentration on the scintillation properties of a polystyrene based plastic scintillator

A novel polystyrene-based scintillator production process involving additive manufacturing

Effects of oxygen on the optical properties of phenyl-based scintillators during irradiation and recovery

Scintillation and structural properties of copolymers and mixtures of styrene, 9-vinylcarbazole and 4-vinylbenzyl chloride based plastic scintillators

Characterization of a novel polyurethane-based plastic scintillator for neutron and gamma detection in mixed radiation fields

Novel epoxy-bPBD-BisMSB composite plastic scintillator for alpha, beta and gamma radiation detection

Development of novel plastic scintillators based on polyvinyltoluene for the hybrid J-PET/MR tomograph

Scintillation detectors constructed with an optimized 2x2 silicon photomultiplier array

Low Energy X-Ray Imaging Using Plastic Scintillating Fiber: A Simulation Study

Development and characterization of a slow wavelength shifting coating for background rejection in liquid argon detectors

Highly efficient photon detection systems for noble liquid detectors based on perovskite quantum dots

Light yield and radiation hardness studies of scintillator strips with a filler