Abstract:Common terminal voltage measurement can be hardly applied to detect quenches in long high temperature superconducting (HTS) conductor on round core (CORC) cable because not only the HTS normal zone propagation velocity (NZPV) is low but also immobilizing a large number of voltage leads is inconvenient. Distributed optical fiber sensing (DOFS) technology is a promising method for quench detection of long superconductors. To sense the thermal changes of CORC cables during quenches more directly and prevent optical fibers from damages by external stress, a fiber-superconducting composite (FSC) CORC cable was fabricated. For this cable, three optical fibers were placed in three grooves of the copper core respectively, then three HTS tapes were spirally wound on the copper core in sequence. Comparing to a traditional CORC cable, obviously, the FSC CORC cable structure has been changed. To promote FSC CORC cable engineering applications, it is necessary to study the fundamental performance of the cable. In this paper, we investigated the electromagnetic, thermal and mechanical properties of the FSC CORC cable by comparing those with a common one. The results demonstrated that, compared to the common one, the magnetic distribution of the FSC CORC cable hardly changed, but the current distribution of the copper core in the FSC CORC cable slightly changed which led to decreases of transport AC loss, in addition, the thermal characteristics of the FSC CORC cable was slightly changed and the bending tolerance ability of the cables reduced within a bending diameter range of 15 cm. What's more, the embedded optical fibers combined with a distributed optical fiber sensing (DOFS) system are successfully used to detect the temperature changes of the cable surface. Finally, to study the quench behaviors of the cable, we built a quench detection platform, which equips with a voltage acquisition system, a thermocouple temperature acquisition system and the DOFS system. By using the platform to detect the quenches of the FSC CORC cable, minimum quench energy (MQE) of the cable and NZPV of the tape and cable at different currents was tested.

Heat Dissipation Performance of Coaxial Cable for Electromagnetic Launch

Transient Responses Of Coaxial Cables In An Electrically Large Cabin With Slots And Windowns Illuminated By An Electromagnetic Pulse

Transient Electromagnetic Response Of A Coaxial Feeding Monopole Antenna Mounted On A Rectangular Metallic Enclosure Illuminated By Electromagnetic Pulses (Emp)

Transient responses of coaxial cables in an electrically large cabin with slots and windowns illuminated by an electromag-

Analysis of Thermo-electric Coupled Simulation for 10 Kv AC XLPE Cable under Different DC Topologies and Laying Modes

DC Electric Field Optimization of AC XLPE Cable Joint in DC Operation

Numerical Study on Electromagnetic Thermal Performance of Non-Metallic Armoured Optoelectronic Cable Winch System

3-D thermal analysis and contact resistance evaluation of power cable joint

Study on the Preload of Coaxial Power Connector in ETC Launch

Electric field calculation and optimization for stress cone of DC cable joint based on the coaxial double-layer insulation model

Thermal-Fluid Analysis of Coaxial Bipolar Superconducting DC Energy Pipeline

Numerical Investigation on Transverse Heat Transfer Properties in Cross Section of Full Size Nb3Sn CICC ITER Conductor

Numerical analysis of thermo-electric field for 10 kV AC XLPE cable in DC operation

Feasibility of cable through a hollow cross-arm as down-lead for a 400 kV Y-shaped composite pylon

Thermal–mechanical coupling performances and parameters sensitivity analyses of a deployable Astromesh antenna under different heat radiations

Damage and failure analysis of insulation structure of electromagnetic coil launcher in multiphysics environment

Computational Modelling of Russia's First 2G-HTS Triaxial Cable

Material Properties and Electric–Thermal–Stress Multiple Fields Coupling Simulation of Power Distribution Cable Accessories

Design and Manufacture of a 100ka Coaxial Pulsed Power Cable for Plasma Generator and PPS in ETC Guns

Research on thermomechanical effects and influencing factors in high voltage cable under multiphysics field coupling

Fundamental study on performances of fiber-superconducting composite CORC cable: Electromagnetic, thermal, mechanical and quench behaviors