Abstract:Hall-effect thrusters (HET) are a stationary form of electric propulsion that have been widely used in space missions. However, the wide range of the divergence angle of the HET plasma plume and the high ion velocities can result in a large area where collisions and plume interactions occur. Of these, low-energy charge-exchange (CEX) ions typically originate from collisions, and can result in severe deposition and sputtering issues on spacecraft components. In this work, we propose a novel magnetic Faraday probe in coordination with a particle-in-cell (PIC) simulation code. This system is able to deflect CEX ions with a changing solenoid current, and can be used to obtain the ion density and energy levels of CEX ions through experimental measurements. In addition, a Faraday probe, a retarding potential analyzer (RPA), and a Langmuir probe were used to obtain the beam characteristics. The CEX ion density at the beam edge area was determined to be in the level of 2.54 × 1012 m−3 (the local ion density of the plasma plume is in the level of 1013 m−3), and the ion energy level at the beam edge area was found to be below 30.1 eV. Due to the difference in the vacuum levels between ground tests and in-space operation, CEX collisions will be more severe during ground tests, and can affect plume measurements and erosion of the thruster. Two different vacuum levels were tested experimentally here to study the relationship between CEX ions and the background neutrals. As a result, it was found that a high background neutral density can exacerbate CEX collisions at the beam edge area, which results in an increase in the CEX ion density and a decrease in the CEX ion energy. This study brings us new information on the CEX ion density and energy distribution at the beam edge area from an experimental point of view. Furthermore, data on CEX ions energy can be used as input data for future plume simulations.

Study on the Preload of Coaxial Power Connector in ETC Launch

Electro-Thermo-Mechanical Characterizations of Various Wire Bonding Interconnects Illuminated by an Electromagnetic Pulse

Heat Dissipation Performance of Coaxial Cable for Electromagnetic Launch

Design and Manufacture of a 100ka Coaxial Pulsed Power Cable for Plasma Generator and PPS in ETC Guns

Simulation of an Electromagnetic Launcher with a Superconducting Inductive Pulsed Power Supply

Numerical Characterization And Evaluation Of Esd Induced Field And Coupling On Interconnection Cable

Electric field calculation and optimization for stress cone of DC cable joint based on the coaxial double-layer insulation model

The Mechanical Performance Analyses of CFETR CSMC Preload Components Under Testing Current

Study on the influence of ignitor position on a coaxial pulsed plasma thruster

Coupled plasma transport and electromagnetic wave simulation of an ECR thruster

Investigation of the Compact Torus Plasma Motion in the KTX-CTI Device Based on Circuit Analyses

Preliminary Compact Torus Injection Experiments on the Keda Torus Experiment Reversed Field Pinch

Calculation of Plasma Radiation in Electrothermal-Chemical Launcher

Study of transport process and discharge structure of inductively coupled electronegative plasmas via fluid model and analytic theory collaboration

Study on Phenomenon and Mechanism of Overvoltage in Electrothermal-Chemical Launch

Determination of Plasma Displacement Based on Eddy Current Diagnostics for the Keda Torus Experiment

Modeling of the Rail Type Electromagnetic Launch System With Superconducting Pulsed Power Supply Considering Resistance

Optimization of a coaxial electron cyclotron resonance plasma thruster with an analytical model

Numerical Simulation on the Pressure Wave in a 30MM Electrothermal-Chemical Gun with the Discharge Rod Plasma Generator

Measurement of the distribution of charge exchange ions in a Hall-effect thruster plume

Preliminary electromagnetic analysis of the COOL blanket for CFETR