Abstract:Novel electrospun inorganic-organic nanofiber reinforced anion exchange membranes were developed by incorporating imidazolium functionalized multiwalled carbon nano tubes (FMWCNTs) into imidazolium functionalized polysulfone nanofibers via co-electrospinning. Under a high-voltage electrostatic field, FMWCNT inorganic nanofibers were able to align along the axis of the electrospun nanofibers, thereby solving the problem of easy agglomeration of FMWCNTs in cast-composite anion exchange membrane, synergistic with the polymer nanofibers to reinforce the membranes. Small angle x-ray suggests that ion clusters are more likely to aggregate in a co-electrospun composite membrane, indicating continuous and lower-energy-barrier pathways for hydroxide transport. As a result, composite electrospun membranes exhibit higher OH- conductivity and better single fuel cell performance. With an additive amount of 0.4 wt.%, hydroxide conductivity reaches a maximum value of 67.5 mScm(-1) (30 degrees C). However, the maximum power density (102.5 mW cm(-2)) is much higher than that of the electrospun (2.1 times) and cast (3.3 times) membranes without FMWCNTs. Fibration of polymer and alignment of multiwalled carbon nanotube nanofibers also greatly enhance the membrane strength. For fully hydrated membranes, tensile stress dramatically increases from 5.6 MPa for a cast membrane without FMWCNTs to 24.4 MPa for an electrospun membrane with 0.4 wt.% FMWCNTs addition. The strategy for co-electrospinning of imidazolium functionalized multiwalled carbon nanotubes/polysulfone presented in this work provides a way to enhance the organic-inorganic interface compatibility, and improve ionic conductivity and mechanical strength of anion exchange membrane simultaneously. (C) 2018 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

High‐Throughput Electrospinning of Unmodified and Aminated Poly(Pentafluorostyrene) for Fiber‐Reinforced Proton Exchange Membranes

An Acid Resistant Nanofiltration Membrane Prepared from a Precursor of Poly(s-Triazine-amine) by Interfacial Polymerization

Achieving Better Balance on the Mechanical Stability and Conduction Performance of Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes Through Polydopamine/polyethyleneimine Co-Modified Poly(vinylidene Fluoride) Nanofiber As Support

Sulfonated polystyrene fiber network-induced hybrid proton exchange membranes.

Electrospun nanofiber enhanced sulfonated poly (phthalazinone ether sulfone ketone) composite proton exchange membranes

Aligned electrospun nanofibers as proton conductive channels through thickness of sulfonated poly (phthalazinone ether sulfone ketone) proton exchange membranes

Composite Polymer Electrolyte Membranes Based on Nafion and Modified PVDF Electrospun Nanofiber Mats

Anhydrous Proton Conductivity of Electrospun Phosphoric Acid-Doped PVP-PVDF Nanofibers and Composite Membranes Containing MOF Fillers

Enhancing Proton Conductivity and Dimensional Stability of Nanofiber Proton Exchange Membranes through In Situ Growth of MOF-Modified PVDF Nanofibers

Preparation and Evaluation of Crosslinked Sulfonated Polyphosphazene with Poly(aryloxy Cyclotriphosphazene) for Proton Exchange Membrane

Preparation of Poly(nass‐co‐hema) Self‐supporting Nanofiltration Membrane with High Cationic Permselectivity by Electrospinning

Enhancing Proton Conductivity of Proton Exchange Membrane with SPES Nanofibers Containing Porous Organic Cage

Self-Enhancement of Perfluorinated Sulfonic Acid Proton Exchange Membrane with Its Own Nanofibers

The Incorporation of Sulfonated PAF Enhances the Proton Conductivity of Nafion Membranes at High Temperatures

Electrospun Imidazolium Functionalized Multiwalled Carbon Nanotube/ Polysulfone Inorganic-Organic Nanofibers for Reinforced Anion Exchange Membranes

All-Perfluorosulfonated-Ionomer Composite Membranes Containing Blow-Spun Fibers: Effect of a Thin Fiber Framework on Proton Conductivity and Mechanical Properties

Preparation of poly(styrenesulfonic acid) grafted Nafion with a Nafion-initiated atom transfer radical polymerization for proton exchange membranes

Preparation and Properties of Proton Exchange Membranes Based on Side-Chain Type Fluorinated Sulfonated Poly (aryl Ether) S

NH2-UiO-66 coated fibers to balance the excellent proton conduction efficiency and significant dimensional stability of proton exchange membrane

Perfluorinated Sulfonic Acid Ionomer/poly(n-Vinylpyrrolidone) Nanofiber Membranes: Electrospinning Fabrication, Water Stability, and Metal Ion Removal Applications

Fabrication and Characterization of Reinforced Electrospun Poly(vinylidene Fluoride-Co-hexafluoropropylene) Nanofiber Membranes