Abstract:The limitation of poor mechanical stability and difficulties in printing electrically conductive components can be overcome owing to the recent introduction of nanotechnology into the field of additive manufacturing (AM) and the consequent development of nonconventional polymer nanocomposites suitable for 3D printing. In the present work, different weight percentages (up to 6 wt % in total) of carbon-based nanostructures-multiwalled carbon nanotubes (MWCNTs), graphene nanoplatelets (GNPs), and a combination of both fillers (MWCNTs/GNPs)-were incorporated into poly(lactic) acid (PLA, Ingeo™) in an attempt to overcome several limitations of conventional 3D manufacturing based on insulating materials. Solution blending and melt mixing were the two fabrication methods adopted for preparation of the samples under test. A comparison of the morphological, rheological, and electrical properties of the resulting nanocomposites was carried out. Moreover, for the same weight concentrations, the influence of physical and geometrical features (i.e., functionalization and aspect ratio) of the embedded fillers was also investigated. Rheological methods were applied to control the quality of fillers dispersion in PLA matrix. The rheological percolation threshold was considered as reference in order to evaluate the internal structure of nanodispersions. TEM visualization, combined with rheological characterizations, was used for efficient control of the nanofiller dispersion. DC characterization revealed that lower electrical percolation thresholds and higher values of electrical conductivity were achieved using fillers with a larger aspect ratio and melt mixing, respectively. Moreover, given the possibility of obtaining complex and appropriate shapes for electromagnetic compatibility (EC) applications, electromagnetic (EM) response of the nanocomposites at the highest filler concentration was investigated in GHz and THz regions. It was found that the electromagnetic shielding efficiency (EMI) of nanocomposites strongly depended on the aspect ratio of the nanofillers, whereas the type of processing technique did not have a significant effect. Therefore, a careful choice of methods and materials must be made to address the final application for which these materials and further 3D printed architectures are designed.

Best of Both Worlds: Synergistically Derived Material Properties via Additive Manufacturing of Nanocomposites (Adv. Funct. Mater. 46/2021)

Heterogeneous Growth of 3D Printed Polymer Network for Multi‐Material Integration

3D printing and nanotechnology

Digital Multiphase Composites via Additive Manufacturing

Topology Optimization of Dynamic Response : Methods , Materials and Additive Manufacturing ( Sim-AM 2019 )

Accelerated Discovery of 3D Printing Materials Using Data-Driven Multi-Objective Optimization

3D Laser Nanoprinting of Functional Materials (Adv. Funct. Mater. 39/2023)

Functional Polymers and Nanocomposites for 3D Printing of Smart Structures and Devices

Advances in additive manufacturing of nanocomposite materials fabrications and applications

Optimizing the Rheological and Thermomechanical Response of Acrylonitrile Butadiene Styrene/Silicon Nitride Nanocomposites in Material Extrusion Additive Manufacturing

Toward Multiscale, Multimaterial 3D Printing

Advanced Material Strategies for Next-Generation Additive Manufacturing

Hybrid Metal-Organic Frameworks/Carbon Fibers Reinforcements for Additively Manufactured Composites

Morphological, Rheological and Electromagnetic Properties of Nanocarbon/Poly(lactic) Acid for 3D Printing: Solution Blending vs. Melt Mixing

Nanomaterials Function in Additive Manufacturing

Scientometric Analysis and Systematic Review of Multi-Material Additive Manufacturing of Polymers

Integration of additive manufacturing process-induced material characteristics into topology optimization

Emergent mechanical properties in highly filled additively manufactured polymer composites

Advances in 3D printing of thermoplastic polymer composites and nanocomposites

Experimental and Numerical Investigation of the Mechanical Properties of 3D-Printed Hybrid and Non-Hybrid Composites

Nanomaterial Patterning in 3D Printing