Abstract:Pore structure is the index reflecting the nature of the physical and mechanical properties of the soil. The resolution scale of the traditional medical CT is not high enough to identify the single grain or pore characterizing the meso-structure of geo-materials. An industrial micro-CT, with a high spatial resolution of 14 μm, is used to scan a Nanjing silty sand specimen fabricated by pluviation. The binary digital image sequence is acquired after preprocessing the CT initial images, and three-dimensional reconstruction is implemented. Arbitrary representative elementary volume (REV) is extracted, and three-dimensional binary matrix is used for the characterization of the REV and for the quantitative calculation. By analyzing the tomographic images, the volume porosity of the whole specimen is calculated, with an error of only 3.93% compared with the experimental porosity. The apparent porosity along the specimen fluctuates between 20.97 and 46.77%. Four typical sections, one horizontal, one tilting with an angle of 60 degrees to the horizon and two orthogonal vertical sections, are extracted from the REV at the bottom of the specimen. Statistical analysis of the preferred orientation is performed, and the results show that the minimum orientation angle occurs at the horizontal section, and one of the two orthogonal vertical sections exhibits the maximum orientation angle and the other exhibits the maximum anisotropic ratio, and the oblique section exhibits approximate isotropy, namely no obvious preferred orientation. The pore network model is used for spatial pore diameter analysis of three extracted REVs, and the results indicate that the maximum pore diameter distributes from 629 to 696 μm, and the minimum pore diameter does from 54 to 77 μm, and the average pore diameter does from 166 to 185 μm, and the pore diameter concentrates from 100 to 200 μm. The proposed method is capable of nondestructive quantitative analysis of pore structure variation of the spatial soil under any effect induced by heat, water or mechanics.

Quantification Of Microstructure Of Fine Grained Soil

An Improved Quantification Method for Characterisation of Clay Microstructure Using SEM

Quantification and Characterization of Microporosity by Image Processing, Geometric Measurement and Statistical Methods: Application on Sem Images of Clay Materials

Quantitative Analysis of Soft Clay Three-dimensional Porosity Based on SEM Image Information

Experimental Study on Clay Pore Microstructure Based on SEM and IPP

Quantification and characterizing of soil microstructure features by image processing technique

Quantitative Appraisal on the Microstructural Characteristics of Compacted Clayey Soils

SOFT SOIL THREE-DIMENSIONAL POROSITY CALCULATED BASE ON SEM IMAGE AND ITS INFLUENCE FACTORS ANALYSIS

Quantitative research on the orientation of microstructures of clayey soil

Microstructure identification and statistical method of the soil SEM image

Quantitative approach on SEM images of microstructure of clay soils

Sample preparation technique and microstructure quantification method for sandy soil

Study for Quantitative Analysis of Loess Microstructure Influence

A QUANTITATIVE STUDY OF THE MICROSTRUCTURE CHARACTERISTICS OF SOIL AND ITS APPLICATION TO THE ENGINEERING

Experimental and quantitative study on micro-structure of soft soil in Suzhou

Analyses the microstructure of the solidified high organic soil

Factors Affecting Analysis of Soil Microstructure Using SEM

Current Status of Digital Image Based Quantitative Analysis of Internal Structures of Soils, Rocks and Concretes and Associated Numerical Simulation

Quantitative assessment of micro-structure feature of seasonal frozen soil in Changchun area

Soil structure evaluation based on the fractal theory and image processing technology

Fine characterization of spatial pore structure of Nanjing silty sand using micro-CT