Abstract:The strength improvement in the heat-treatable Al-Zn-Mg-Cu alloys is generally achieved by increasing the volume fraction of nanoprecipitates and reducing the grain size. However, utilizing one of them usually leads to a drastic decrease in ductility. Herein, we architect a hierarchical microstructure integrating bimodal grain structures, nanoprecipitates, and hard-brittle coarse particles wrapped by ductility coarse grain (CG) bands via conventional cold rolling (CR) deformation and heat treatment methods to break the strength-ductility dilemma in the Al-8.89Zn-1.98Mg-2.06Cu-0.12Zr-0.05Sc-0.05Hf (wt.%) alloy. The results reveal that the coupling of high-volume fraction ( -1.2%) nanoprecipitates, -52% narrow CG bands, and most coarse particles encapsulated by CG bands contribute to the 45% CR sample with outstanding overall mechanical properties (a tensile strength of 655 MPa, a yield strength of 620 MPa, and an elongation of 15.5%). Microstructure-based strength analysis confirms that the high strength relates to a trade-off between the hierarchical features, namely high-volume fraction nanoprecipitates to counterbalance the strength loss caused by grain coarsening. The excellent ductility is due to the introduction of medium CG content with a narrow width that can trigger a cross-scale strain distribution during plastic deformation, suppressing the catastrophic failure in the fine grain (FG) regions and facilitating the dimple fracture along the CG bands. This study proposes a feasible approach for tailoring hierarchical microstructures in Al-Zn-Mg-Cu alloys to achieve a superior strength-ductility combination. (c) 2024 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Coordinated deformation mechanisms of high formability Al–Mg–Si–Cu–Zn–Fe alloys via coupling control of thermomechanical processes

Tailoring the formability and planar anisotropy of Al-Mg-Si-Cu-Zn alloys via cross hot rolling and two-stage cold rolling

Synergistic effect of gradient Zn content and multiscale particles on the mechanical properties of Al–Zn–Mg–Cu alloys with coupling distribution of coarse–fine grains

The multi-scale Si-containing phases-assisted improvement in the microstructure and mechanical properties of Al–Mg-xSi-Cu-Zn alloys

Designing a low-alloyed Mg–Al–Sn–Ca alloy with high strength and extraordinary formability by regulating fine grains and unique texture

Deformation mechanisms and mechanical properties of the high-strength and ductile Al-Zn-Mg-Cu alloys processed by repetitive continuous extrusion forming process with different heat treatments

Synergy of Strength-Ductility in a Novel Al-Zn-Mg-Cu-Zr-Sc-Hf Alloy Through Optimizing Hierarchical Microstructures

Hot Deformation Behavior and Processing Maps of an As-Cast Al-5Mg-3Zn-1Cu (wt%) Alloy

Strength and Formability Improvement of Al-Cu-Mn Aluminum Alloy Complex Parts by Thermomechanical Treatment with Sheet Hydroforming

Enhanced Strength and Ductility of A356 Alloy Due to Composite Effect of Near-Rapid Solidification and Thermo-Mechanical Treatment

Optimisation of Alloy Composition for Highly-Formable Magnesium Sheet

Optimizing mechanical property of spray formed Al-Zn-Mg-Cu alloy by combination of homogenization and warm-rolling

Improving the Strength and Ductility of Al–Mg–Si–Cu Alloys by a Novel Thermo-Mechanical Treatment

Research on Alloy Design and Process Optimization of Al–Mg–Zn-Cu-Based Aluminum Alloy Sheets for Automobiles with Secured Formability and Bake-Hardenability

Simultaneously Enhanced Strength and Ductility of 6xxx Al Alloys Via Manipulating Meso-Scale and Nano-Scale Structures Guided with Phase Equilibrium

Strengthening Behavior of Al–Cu–Mg Alloy Sheet in Hot Forming–quenching Integrated Process with Cold–hot Dies

Dramatic Improvement of Formability in Mg-3Al-1Sn-0.5Ca-0.1Sm Alloy Via Mn Microalloying Combined with High Temperature Rolling

Microstructure evolution and mechanical responses of Al–Zn–Mg–Cu alloys during hot deformation process

Biaxial Formability and Microstructure of an Al-Mg-Si Alloy Sheet Post Solution Heat Treatment

Excellent superplasticity and deformation mechanism of Al–Mg–Sc–Zr alloy processed via simple free forging

Microstructure and mechanical properties of Al-Mg-Si alloy during solution heat treatment and forging integrated forming process