Abstract:Deep shale gas formations with a burial depth larger than 3500 m contain over 65% of the total shale gas reserves in the Southern Sichuan Basin. However, complex reservoir conditions, such as extensively developed natural fractures or faults and large horizontal principal stress differences, generate significant uncertainties in post-fracturing well performance. Quick estimation of hydraulic fracture properties, such as the fracture surface area and effective half-length, via pressure falloff data, after the main fracturing treatment offers a timely and improved understanding of stimulation efficiency and provides key information for post-frac well performance investigation. In this study, we comprehensively investigate fracture properties of different fractured stages, such as main fracture surface area, secondary fracture surface area, and effective main fracture half-length. Then, we analyze the correlation of these properties, productivity, pressure falloff data, and fracturing treatment parameters via a case study. Here, we employ the basic pressure-falloff-based approach of Liu et al. (2020) and further add the impact fracture tortuosity. First, collect high-quality pressure falloff data and generate the log-log diagnostic plot of pressure drop and the corresponding derivative for each stage. Then, generate the composite G-function plot for each stage and find the d(∆p)/dG value when the first closure of the hydraulic fracture occurs. Next, determine the pressure loss caused by the wellbore and near-wellbore fracture tortuosity and calculate the fracture tortuosity. Finally, calculate the main fracture and secondary fracture properties. Well A, a deep shale gas well in the Southern Sichuan Basin, is selected and analyzed. The effective main fracture half-length of well A ranges from 279 ft to 395 ft, depending on the operating and reservoir conditions. Compared with microseismic data, the average main fracture effective half-length is 54.7% of the observed average SRV half-length. The relative magnitude of pressure loss during the pressure falloff period caused by near-wellbore fracture tortuosity can roughly reflect the complexity of the created fracture system. A new fracture complexity evaluation concept is proposed based on the surface area values of main and secondary fractures. For fractured stages, the total pressure drop is positively correlated with the total fracture surface area of the fracture system and total injected fluid volume. The correlation between fracture surface area and gas productivity is weaker compared with that between fracture surface area and water productivity. Some discrepancies in specific stages are possibly caused by abnormal or poor-quality pressure falloff data. By combining other key information on field treatments, the understanding obtained from fracture surface area estimation helps to define changes in treatment design and enhance well productivity. This integrated approach can also serve as a simple but practical tool for estimating hydraulic fracture properties during offshore fracturing.

Optimization of production system of shale oil development in Ordos basin, China

An efficient and fast shale oil cluster well drilling technology for Shengli Oilfield

Wettability evaluation of shale oil reservoirs and its impact on the post-fracturing shut-in duration of horizontal wells: a quantitative study for Ordos Basin, NW China

Influence of Gas Flooding Pressure on Groundwater Flow during Oil Shale In Situ Exploitation

Fracture Spacing Optimization Method for Multi-Stage Fractured Horizontal Wells in Shale Oil Reservoir Based on Dynamic Production Data Analysis

Numerical Simulation of Choke Size Optimization in a Shale Gas Well

Optimization of Fine-Fracture Distribution Patterns for Multi-Stage and Multi-Cluster Fractured Horizontal Wells in Tight Gas Reservoirs

Construction Parameters Optimization of CO2 Composite Fracturing for Horizontal Shale Wells

Study on the optimal design of volume fracturing for shale gas based on evaluating the fracturing effect—A case study on the Zhao Tong shale gas demonstration zone in Sichuan, China

An Optimal Model for Determination Shut-In Time Post-Hydraulic Fracturing of Shale Gas Wells: Model, Validation, and Application

Performance Evaluation of Multistage Fractured Horizontal Wells in Tight Gas Reservoirs at Block M, Ordos Basin

Optimization of Multiple Hydraulically Fractured Factors to Maximize the Stimulated Reservoir Volume in Silty Laminated Shale Formation, Southeastern Ordos Basin, China

Field experiments and main understanding of shale oil hydraulic fracturing

Study on Enhancing Shale Oil Recovery by CO2 Pre-Pad Energized Fracturing in A83 Block, Ordos Basin

Optimization of Staged-Fracturing in Heterogeneous Tight Gas Reservoirs of Western-Sichuan Gas Field

Quick Hydraulic Fracture Property Estimation Through Pressure Falloff Data During Fracturing Operations: A Deep-Shale Case Study from the Southern Sichuan Basin

Study on the optimization of timing for horizontal well re-fracturing in tight oil reservoir -- A case study of Baikouquan Formation in North Mahu Oilfield, Junggar Basin, Western China

Strategies for Optimizing Shut-In Time: New Insights from Shale Long-Term Hydration Experiments

Production Performance Simulation of the Fractured Horizontal Well Considering Reservoir and Wellbore Coupled Flow in Shale Gas Reservoirs

Key theoretical and technical issues and countermeasures for effective development of Gulong shale oil, Daqing Oilfield, NE China

Modeling a Multi-Parameter Interaction of Geophysical Controls for Production Optimization in Gas Shale Systems