Abstract:Qaidam Yingxi shale oil has the characteristics of self generation and self storage, large-area continuous reservoir formation, low porosity, low permeability, no natural productivity or low production. Large scale hydraulic fracturing and horizontal well technology are required for economic production, As the core of oil reservoir reconstruction, the fracturing technology can improve the production of single well to a certain extent. Firstly, this paper deeply analyzes and studies the reservoir engineering parameters. Aiming at the construction pressure, complexity factor and reconstruction volume, the parameters such as tensile strength, stress gradient, horizontal well stress difference, brittleness, minimum principal stress, Poisson’s ratio, Young’s modulus and internal friction factor are selected for engineering evaluation. The grey correlation analysis and Pearson correlation analysis are used to calculate the grey correlation parameters, In order to clarify the influence of geomechanics on the scale of reservoir reconstruction during fracturing, it is as follows: minimum principal stress > brittleness > horizontal stress difference > stress gradient > tensile strength > maximum principal stress > Young’s modulus > Poisson’s ratio > internal friction factor; Based on conventional black oil model conditions, and considering the starting pressure gradient of oil-water two-phase, the stress sensitivity of permeability and dynamic capillary force, the reservoir model is established to optimize the fracturing operation parameters; The fracturing operation curve, microseismic monitoring data and tracer fitting data are used to evaluate the fracturing effect, and some factors affecting productivity and their laws are analyzed. The order of engineering factors is as follows: joint length > total liquid volume > reconstruction volume > displacement > joint height > horizontal section length > total sand volume > number of construction sections > fiber volume > temporary plugging particle volume; Ranking of geological factors: reservoir penetration rate > natural fracture density > reservoir penetration rate > porosity > reservoir thickness. In this paper, various geological factors in Yingxi are fully considered to establish the reservoir model, combined with the fracture mathematical model, the influence law of the dynamic change of reservoir physical properties on the output in the production process is studied, and the optimization design of volume fracturing fracture parameters is carried out; The mathematical method of fuzzy mathematics is used to analyze the production data, determine the main control factors affecting the output, and quantify them qualitatively. The research method of this paper, practically combined with production practice, studies the production performance, influencing factors and stimulation mechanism of oil wells after shale oil volume fracturing from the perspective of geological engineering integration, which has certain guiding significance for the efficient development of Yingxi shale oil.

Study on the optimization of timing for horizontal well re-fracturing in tight oil reservoir -- A case study of Baikouquan Formation in North Mahu Oilfield, Junggar Basin, Western China

Optimization of Horizontal Well Pattern Re-Fracturing Timing in Conglomerate Reservoir in Mahu Sag of Junggar Basin

Theoretical understandings, key technologies and practices of tight conglomerate oilfield efficient development: A case study of the Mahu oilfield, Junggar Basin, NW China

Optimization of Re-Fracturing Method and Fracture Parameters for Horizontal Well in Mahu Conglomerate Oil Reservoir

Optimization method of refracturing timing for old shale gas wells

Comparative Study on Artificial Fracture Modeling Schemes in Tight Reservoirs—For Enhancing the Production Efficiency of Tight Oil and Gas

Re-fracturing Mode Research for Horizontal Well in Chang 7 Tight Reservoir of Ordos Basin

Optimization of Fine-Fracture Distribution Patterns for Multi-Stage and Multi-Cluster Fractured Horizontal Wells in Tight Gas Reservoirs

Density cutting volume fracturing technology for horizontal wells in the ultra-low permeability reservoirs: a case study of the Yuan284 area in the Huaqing oilfield Ordos Basin, China

Chemical Agents Diversion with Microseismic Monitoring – New Prospects of Refracturing for Open-Hole Horizontal Well in Tight Oil Reservoir of Junggar Basin, China

Quantitative prediction of the drilling azimuth of horizontal wells in fractured tight sandstone based on reservoir geomechanics in the Ordos Basin, central China

Optimization of fracturing technology for unconventional dense oil reservoirs based on rock brittleness index

Refractured Well Hydraulic Fractures Optimization in Tight Sandstone Gas Reservoirs: Application in Linxing Gas Field

Dramatically Enhancing Oil Recovery via High-Efficient Re-Fracturing Horizontal Wells in Ultra-Low Permeability Reservoirs: A Case Study in HQ Oilfield, Ordos Basin, China

Research on Refracturing Technology of Horizontal Wells Based on Dynamic Drainage Volume

Study on Hydraulic Fracture Propagation in Mixed Fine-Grained Sedimentary Rocks and Practice of Volumetric Fracturing Stimulation Techniques

Numerical Simulation Study on Optimal Shut-In Time in Jimsar Shale Oil Reservoir

Technology of production enhancement by fracturing of multiple branch fracture in vertical well in low permeability oilfields in the periphery of Daqing

Progress and prospects of horizontal well fracturing technology for shale oil and gas reservoirs

Analysis and Application of Influencing Factors on Fracturing Effect of Yingxi Shale Oil

Fracturing and production analysis of the efficacy of hydraulic fracture stage reduction in the improvement of cost‐effectiveness in shale oil development: A case study of Jimsar shale oil, China