Abstract:For microelectronic industry, Cu-based substrate and epoxy molding compound (EMC) interface is inherently weak and most likely to delaminate, well-known as a major threat for integrated circuits (ICs) reliability. In this paper, hierarchical whisker-like oxide/Cu cone structure was for the first time to be fabricated by combining electroless plating with heat treatment methods to enhance the interface adhesion between Cu-based substrate and EMC. The surface morphology was characterized by scanning electron microscope (SEM). Result shows that the hierarchical whisker-like oxide/Cu cone film is fine, dense and uniform; Single Cu cone structure is about 3-5 μm in height and 1 μm in root diameter; a layer of whisker-like oxide grows perpendicularly to circular surface of Cu cone, with length ranging from tens to hundreds of nanometers. Adhesion strength between the as-prepared substrates and EMC were measured by button shear test. With consideration of oxidation caused by practical processes (e.g. wire bonding), the interface of EMC and porous oxide formed at 260°C for 5 min was taken as standard sample, representative of practical interface. To further study the effect of whisker-like oxide and Cu cone solely on adhesion performance, whisker-like oxide, porous oxide/Cu cone were investigated as well. Button shear test results reveal that interfacial adhesion strength of EMC and whisker-like oxide, porous oxide/Cu cone, hierarchical whisker-like oxide/Cu cone are 85%, 110% and 162% higher than that of standard interface. Moreover, the mechanism for adhesion improvement was discussed by facture surface observation, failure path assumption and force-displacement curve analysis. Results show that interface of EMC and hierarchical whisker-like oxide/Cu cone exhibits brittle/ductile property with about 3-5 μm thick EMC left on the fracture surface, indicating cohesive failure caused by remarkable mechanical interlocking effect. © 2011 Elsevier Ltd. All rights reserved.

Surface adhesion engineering for robust organic semiconductor devices

Adhesion improvement of Cu-based substrate and epoxy molding compound interface by hierarchical structure preparation

Surface-Energy-Mediated Interfacial Adhesion for Mechanically Robust Ultraflexible Organic Photovoltaics

Wet adhesion enhancement through citric-acid-regulated supramolecular network

Wetting-enhanced adhesion of photo-polymerized supramolecular adhesives for both smooth and rough surfaces

Surface state engineering of molecule-molecule interactions

Bioinspired chemical design to control interfacial wet adhesion

Molecular Engineering Super-Robust Dry/Wet Adhesive with Strong Interface Bonding and Excellent Mechanical Tolerance

Surface microstructural engineering of silicone elastomers for high performance adhesive surface-enabled mechanical energy harvesters

Inorganic-Organic Silica/PDMS Nanocomposite Antiadhesive Coating with Ultrahigh Hardness and Thermal Stability

Adhesion behaviors on four special wettable surfaces: natural sources, mechanisms, fabrications and applications

Wafer‐Scale, Highly Uniform Surface Functionalization from Vapor Phase and Applications to Organic Transistors (Adv. Mater. Interfaces 14/2023)

Molecular grafting to improve adhesion of spray-deposited circuits on polymeric surface for flexible electronics

Robust and dynamic underwater adhesives enabled by catechol-functionalized poly(disulfides) network

Organic molecules grafted silicon surface through wet chemistry method

Recent Progress on Surface Chemistry I: Assembly and Reaction

An investigation of methods to enhance adhesion of conductive layer and dielectric substrate for additive manufacturing of electronics

Supramolecular Adhesive Materials from Natural Acids and Sugars with Tough and Organic Solvent-Resistant Adhesion

Mechanisms of metal wettability transition and fabrication of durable superwetting/superhydrophilic metal surfaces

Scalable Underwater Adhesives with High-Strength, Long-Term, and Harsh-Environment Adhesion Enabled by Heterocyclic Chemistry

Bioinspired Multiscale Wet Adhesive Surfaces: Structures and Controlled Adhesion