Abstract:The wearable application of flexible organic solar cells (f-OSCs) necessitates high power conversion efficiency (PCE) and mechanical robustness. However, photoactive films based on efficient non-fullerene small molecule acceptors (NF-SMAs) are typically brittle, leading to poor mechanical stability in devices. In this study, we achieved a remarkable PCE of 18.06% in f-OSCs while maintaining ultrahigh mechanical robustness (with a crack-onset strain (COS) of higher than 11%) by incorporating a linker dimerized acceptor (DOY-TVT). Compared to binary blends, ternary systems exhibit reduced non-radiative recombination, suppressed crystallization and diffusion of NF-SMAs, and improved load distribution across the chain networks, enabling the dissipation of the load energy. Thus, the ternary f-OSCs developed in this study achieved, high PCE and stability, surpassing binary OSCs. Moreover, the developed f-OSCs retained 97% of the initial PCE even after 3000 bending cycles, indicating excellent mechanical stability (9.1% higher than binary systems).Furthermore, the rigid device with inverted structure based on the optimal active layer exhibited a substantial increase in efficiency retention, with 89.6% after 865 h at 85°C and 93% after more than 1300 h of shelf storage at 25°C. These findings highlight the potential of the linker oligomer acceptor for realizing high-performing f-OSCs with ultrahigh mechanical robustness.

Surface-Energy-Mediated Interfacial Adhesion for Mechanically Robust Ultraflexible Organic Photovoltaics

Waterproof and ultraflexible organic photovoltaics with improved interface adhesion

Flexible Solution-Processed Electron-Transport-Layer-Free Organic Photovoltaics for Indoor Application

Flexible High‐Performance and Solution‐Processed Organic Photovoltaics with Robust Mechanical Stability

Biomimetic Electrodes for Flexible Organic Solar Cells with Efficiencies over 16%

Emerging Strategies toward Mechanically Robust Organic Photovoltaics: Focus on Active Layer

Design of a Rigid Scaffold Structure Toward Efficient and Stable Organic Photovoltaics

Thermoplastic elastomer enhanced interface adhesion and bending durability for flexible organic solar cells

Highly efficient organic photovoltaics with enhanced stability through the formation of doping-induced stable interfaces

Interfacial Engineering for Improved Stability of Flexible Perovskite Solar Cells

Simple Method for Creating Hydrophobic Ultraflexible Photovoltaics

Interlayer surface energy control for high-efficiency printed organic photovoltaic cells

Surface adhesion engineering for robust organic semiconductor devices

Stretchable and transparent nanopillar arrays for high-performance ultra-flexible organic photovoltaics

Overcoming the Interfacial Photocatalytic Degradation of Nonfullerene Acceptor-Based Organic Photovoltaics by Introducing a UV-A-Insensitive Titanium Suboxide Layer

Organic–inorganic hybrid cathode interlayer for efficient flexible inverted organic solar modules

Ultra Robust and Highly Efficient Flexible Organic Solar Cells with Over 18% Efficiency Realized by Incorporating a Linker Dimerized Acceptor.

Electrode stress passivation via oxide titanium amorphous interlayer for flexible non-fullerene organic photovoltaics

Tuning Surface Defect States in Sputtered Titanium Oxide Electron Transport Layers for Enhanced Stability of Organic Photovoltaics

Self‐Assembled Interlayer Enables High‐performance Organic Photovoltaics with Power Conversion Efficiency Exceeding 20%

Interfacial Engineering of Ultrathin Metal Film Transparent Electrode for Flexible Organic Photovoltaic Cells