Abstract:Real-time strain monitoring of large composite structures such as wind turbine blades requires scalable, easily processable and lightweight sensors. In this study, a new type of strain-sensing coating based on 2D MXene nanoparticles was developed. A Ti3C2Tz MXene was prepared from Ti3AlC2 MAX phase using hydrochloric acid and lithium fluoride etching. Epoxy and glass fibre-reinforced composites were spray-coated using an MXene water solution. The morphology of the MXenes and the roughness of the substrate were characterised using optical microscopy and scanning electron microscopy. MXene coatings were first investigated under various ambient conditions. The coating experienced no significant change in electrical resistance due to temperature variation but was responsive to the 301-365 nm UV spectrum. In addition, the coating adhesion properties, electrical resistance stability over time and sensitivity to roughness were also analysed in this study. The electromechanical response of the MXene coating was investigated under tensile loading and cyclic loading conditions. The gauge factor at a strain of 4% was 10.88. After 21,650 loading cycles, the MXene coating experienced a 16.25% increase in permanent resistance, but the response to loading was more stable. This work provides novel findings on electrical resistance sensitivity to roughness and electromechanical behaviour under cyclic loading, necessary for further development of MXene-based nanocoatings. The advantages of MXene coatings for large composite structures are processability, scalability, lightweight and adhesion properties.

A self-assemble strategy toward conductive 2D MXene reinforced ZrO2 composites with sensing performance

MXene-transition Metal Sulfide Composite Electrodes for Supercapacitors: Synthesis and Electrochemical Characterization

Controllable Patterning of Porous MXene (ti3c2) by Metal‐Assisted Electro‐Gelation Method

Preparation of MXene with high conductivity and its application on conductive fabrics

MXenes and Their Applications in Wearable Sensors

Research Progress on Two-Dimensional Layered MXene/Elastomer Nanocomposites

Ultra-compact MXene fibers by continuous and controllable synergy of interfacial interactions and thermal drawing-induced stresses

Interfacial properties and strengthening mechanisms of few-layered MXene reinforced Mg-based composites

High Conductivity and Stability of Polystyrene/mxene Composites with Orientation-3D Network Binary Structure.

Two-dimension MXene Nanosheets on Nano-scale Fibrils in Hierarchical Porous Structure to Achieve Ultra-high Sensitivity

One-Pot Fabrication of an MXene-ZrP@PDA Heterojunction for Enhanced Corrosion/Wear Resistance of Waterborne Epoxy Coatings

A weldable MXene film assisted by water

Self-assembly of dendritic-lamellar MXene/Carbon nanotube conductive films for wearable tactile sensors and artificial skin

Recent progress of MOF/MXene-based composites: Synthesis, functionality and application

A Universal In-Situ Interfacial Growth Strategy for Various MXene-Based van der Waals Heterostructures with Uniform Heterointerfaces: The Efficient Conversion from 3D Composite to 2D Heterostructures

MXene-MoS2 nanocomposites via chemical vapor deposition with enhanced electrocatalytic activity for hydrogen evolution

Two-dimensional MXene with Multidimensional Carbonaceous Matrix: A Platform for General-Purpose Functional Materials

Strong Sequentially Bridged MXene Sheets.

Dual conductive network sensors based on an MXene/PDES supramolecular elastomer and their performance

Strain Sensing Coatings for Large Composite Structures Based on 2D MXene Nanoparticles

Enhanced Oxidation-Resistant and Conductivity in MXene Films with Seamless Heterostructure